• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. voes

    foot controller

    Check out the Voes MX-line. Syncs with the Axe-Fx II: syncs preset name, works with scenes, shows tuner, tempo, looper,... Can handle FX Block On/Off state and FX X/Y state. Several templates included specially for the Axe-Fx II to keep you up and running in no time. 3 Pages, 2 fully...
  2. voes

    Controlling FX block bypass via MIDI

    If you mean "foot switches could bypass different blocks in different presets.". Yes, that is no problem. For the first 100 presets you can select the on/off state of each button.
  3. voes

    Controlling FX block bypass via MIDI

    According the AX-8 manual on page 95, blocks can be controlled by CC. Example: Drive 1 Bypass. On = CC49 Value 127, Off = CC 49 Value 0.
  4. voes

    Unboxing most powerful floor modeler in the UNIVERSE

    Can't be the Turbo, nor the Mk II, since the video is taken before both products were for sale.
  5. voes

    Rush. The Camera Eye solo played on a 1953 Les Paul Goldtop

    Great tone! Great playing!
  6. voes

    My "OMC9" setup

    I know ;) Using sysex commands.
  7. voes

    FC6 alternatives

    Check out the Voes MX-line. Syncs with the Axe-Fx III / FM3. Syncs preset name, scene name, active scene, block on/off state, block selected channel, tuner, tempo, looper,... 3 Pages, 2 fully programmable On each page every button has normal press and long press. Comes in 5 different models...
  8. voes

    FM3 Firmware Version 4.01

    Thank you!
  9. voes

    Mux 2 control via MIDI?

    Working perfect on the Voes MX.
  10. voes

    Axe-Fx III Firmware Release Version 16.05

    Thank you Cliff!
  11. voes

    Simple midi switcher for FM3 scene changes

    More info on www.voes.be
  12. voes

    Delay Block Update

    Great! Thank you Cliff!
  13. voes

    Midi controller except fc6 for axe fx 3

    Yes, all models are available
  14. voes

    This would be nice, if possible?

    Looks great and IMHO there is a market for this concept. Some musicians want the full power of a III and the portability and all-in-one concept of a FM3
  15. voes

    Midi controller except fc6 for axe fx 3

    https://voes.be/pricing
  16. voes

    Midi controller except fc6 for axe fx 3

    Check out my MX Midi Controllers: Different sizes for different needs. All using the same editor (windows/mac) Syncs with the Axe-Fx III/FM3: syncs preset name, scene name, active scene, FX block on/off state and active channel, tuner info, tempo, looper, ... 3 pages. 2 fully programmable, 1...
  17. voes

    FM3 with other midi controllers

    When a scene is changed (on the MX), the MX will ask the FM3 to change the scene and send the scene name, the on/off state and the selected channel of all blocks.
  18. voes

    FM3 with other midi controllers

    If you have settings like below, and you send a preset (button 1) from the MX to the FM3 and have a drive button (button 5) on the MX, then the drive button will sync with the FM3 and show the correct On/Off state. Again, crucial is that the MX sends the preset change and not the FM3.
  19. voes

    FM3 with other midi controllers

    We ship worldwide and have a lot of customers in the USA. About the Mac editor. I got that question several times over the years. It finally found the time and the right program language (Python). Looking good so far and making progress. Biggest struggle I'm having is how to compile to an...
  20. voes

    FM3 with other midi controllers

    @diskoduck : it is just the way you use the FM3 buttons. There is no parameter you have to set. If you use the MX /FM3 this way, you are good: MX: presets + bank up/down FM3: scenes and/or block FX or MX: scenes + preset up/down FM3: block FX - tempo/tuner or MX: presets + bank up/down...
  21. voes

    FM3 with other midi controllers

    Yes. but only, and this is important, if the MX is master. Like any other Midi controller, the MX must be master and the Midi device (FM3) must be slave. Oherwise, when you push a FM3 button, the FM3 will act as master and the MX should follow as slave. But the FM3 will not send any signal to...
  22. voes

    FM3 with other midi controllers

    @Roadrunner Check my MX midi foot controllers. Syncs with the FM3. Sync Preset name, scene name, active scene, block fx on/off state, selected channel, tuner info, tempo.... 3 pages (2 fully programmable, 1 preset page). 2 layers per button (normal press and long press). 7-color LED per button...
  23. voes

    FM3 with other midi controllers

    The MX-9 is bidirectional! However, because of the lack of a LCD on the MX-9, you won't benefit of most sync options like preset name, scene name, tuner info.
  24. voes

    Adam Audio A7X or Yamaha HS8’s

    I don't know nothing about the Yahama's, but I'm extremely satisfied by the Adam A7. (I don't have the A7X but the earlier model)
  25. voes

    FM3-Edit 1.03.03

    Thank you Michael.
  26. voes

    FM3 Firmware Version 3.03 beta 1

    Thank you!
  27. voes

    FM3 and external switch options?

    My MX line Midi Controllers will do the job. The MX will sync with the FM3: Preset Name, Scene Name, active scene, block on/off status, block selected channel, tuner, tempo, looper, .... Easy to use editor will a lot of FM3 templates to start. 3 Pages: 2 fully programmable, 1 fixed preset...
  28. voes

    Let's see those FM3 rigs!

    What brand are those XLR and Midi connectors?
  29. voes

    Remote control for Axe-Fx 3 except FC-12 and FC-6

    Check out my MX-line. Midi controller in different sizes, all using the same editor. MX-12 2x6, MX-12 3x4, MX-18. 3 Pages. one preset page and two totally programmable pages. Each page has normal press and long press per button. Each press (normal/long) has up to 6 commands. More than 50...
  30. voes

    FS [SOLD] FC-6

    I don't think so. The OP wants to sell the FC-6 :)
  31. voes

    You guys are in for another treat.

    Can't wait!!
  32. voes

    Axe-Fx III 16.00 Beta 9 "Cygnus" Firmware - Public Beta #6

    [EDIT - Link removed due to High Cut control operating backwards bug]
  33. voes

    Axe-Edit III 1.08.11

    Thank you
  34. voes

    Axe-Edit III 1.08.10

    Thank You!
  35. voes

    FM3 Firmware Version 3.02

    Thank you Bryant
  36. voes

    7-pin MIDI question

    Our controllers accept AC and DC. Polarity does not matter. A rectifier is used to set things right.
  37. voes

    7-pin MIDI question

    The 7-Pin Midi of the our products is connected: pin 4-2-5 Midi Out (2 = gnd). This is the standard connection for Midi out pin 1-3 Midi In pin 6-7 Power In (since polarity does not matter in the MX, there is no particular positive and negative side) The M-Box will work with all our Midi...
  38. voes

    Axe-Fx III 16.00 Beta 4 "Cygnus" Firmware - Public Beta

    Please read the first post of the Master himself: IMPORTANT - READ ME - DON'T IGNORE - LISTEN UP CHUCKLEHEADS 1. This is BETA firmware. It is not guaranteed to be flawless and bug-free. 2. It WILL change the sound of your presets. 3. The volume levels of your presets WILL likely change. 4...
  39. voes

    Axe-Fx III 16.00 Beta 4 "Cygnus" Firmware - Public Beta

    Wow! That sounded great Marco!
  40. voes

    FM3 Firmware Version 3.02 Beta 1

    Thank you Bryant
  41. voes

    FM3-Edit 1.03.00 (supports fw 3.02 public beta)

    Thank you Michael!
  42. voes

    What's your gig strategy with the FM3? Here's mine (so far)

    Thanks. Pedalboard is a piece of plywood 31cm x 60cm
  43. voes

    What's your gig strategy with the FM3? Here's mine (so far)

    this is my current setup. FM3 + Voes MX-5 and SW-1 + Mission Engineering SP-1 (wah) + Roland EV-5 (volume). On the FM3 I use presets with 4 different AMP+CAB combinations going from clean to mean. FM3 buttons: Button 1 normal press: Pitch (mostly configured as detune-chorus to save CPU)...
  44. voes

    Voes MC-5Jr + FM3 = Awesome!

    First to be clear, because the terminology between MC and MX is different and might be confusing. In the MC-5jr a page indicates a normal press (page 1) or long press (page 2). In the MX these are actually 2 pages. Each page has for each button a normal press and a long press. Back to your...
  45. voes

    Voes MC-5Jr + FM3 = Awesome!

    Thanks for the nice words! Really appreciate this. Btw, this is my current setup. FM3 + MX-5 and SW-1 + Mission Engineering SP-1 (wah) + Roland EV-5 (volume). FM3 buttons control Pitch (mostly configured as detune-chorus) / Phaser - Drive / Drive channel - Delay / Delay channel MX-5 controls...
  46. voes

    Third-Party MIDI Spec

    The Mark 1 and Mark 2 use the same Sysex codes
  47. voes

    Legacy Liquid Foot Pro: Cant get the editor to work :( Help?

    Best way is to program directly on the hardware. I found the editor not reliable. Here's a online manual I made a couple of years ago: voes.be/liquidfoot/pro/index.html Fantastic products at the time. These were a great inspiration for my own Midi Foot controllers.
  48. voes

    Axe-Fx III foot controllers

    Voes MX-5 or MX-6. Cheaper than the Morningstar! More info on www.voes.be
  49. voes

    Axe-Fx III foot controllers

    My MX-line will sync with the Axe-Fx Standard, Ultra, II(XL+), III and FM3. Syncs Preset name, Scene name, Active Scene, Block On/Off state, Block active channel, Tuner info, Looper, Tempo, ... With "Easy Setup" in the editor you can set up the MX in just 3 steps. Different models for...
  50. voes

    can you give me the original link, then I will try to restore the link.

    can you give me the original link, then I will try to restore the link.
  51. voes

    Wish: Cab Selection like the QC

    I'm not talking about third party IRs. I mean the current internal CABs, or eventually new internal CABs
  52. voes

    Wish: Cab Selection like the QC

    The only thing I really envy about the QC is the graphical interface they use to select a Cab. As I understand this, hundreds of different IR's are underneath the interface. By moving the position, you just select another IR. Workflow is a lot easier this way than going thru all the different...
  53. voes

    Wish Global Virtual Capo

    +1
  54. voes

    Free IRs in Celebration of the 80th Birthday of Frank Zappa

    Awesome! Thank you!
  55. voes

    New FM ???

    Read this message from Cliff on TGP about the QC thread: "Actually the Axe-Fx III is the most powerful modeler on the planet. By quite a margin. The QC is currently the most powerful floor modeler. That could change very soon."...
  56. voes

    FM3-Edit 1.02.01

    Thank you Michael!
  57. voes

    Axe-Fx III Firmware Release Version 15.01

    Thank you Cliff!
  58. voes

    Axe-Edit III 1.08.06

    Thank you Michael!
  59. voes

    Axe-Edit III 1.08.03 (public beta)

    Thank you Michael!
  60. voes

    Best FRFR for FM3 (Poll inside)

    CLR!
  61. voes

    Axe-Edit III 1.08.02

    Thank you Michael!
  62. voes

    Axe-Fx III Firmware Release Version 14.06

    Thank you Cliff!
  63. voes

    Axe-Edit III 1.08.01

    Thank you Michael.
  64. voes

    Axe-Fx III Firmware Release Version 14.05

    Thank you Cliff
  65. voes

    The Royal Scam

    Thank you!
  66. voes

    The Royal Scam

    Kid Charlemagne. Thank you!
  67. voes

    The Royal Scam

    Fantastic job! Love your playing and your guitar sound. Which (virtual) amp & cab did you use?
  68. voes

    Ordered my FM3! Now what?

    Studio monitor: ADAM A7(x) Stage monitor: Atomic CLR
  69. voes

    FM3 FC-6 carry bag or case options

    Warwick Keyboard Bag
  70. voes

    Using a MIDI controller to mimic FC-6 OMG9

    IMO that's not possible. The MIDI footcontroller must always be MASTER. The FM3 won't send any sysex data about preset or scene to Midi Out when using the buttons on the FM3. My solution is to have use a Midi controller with enough buttons like the Voes MX-12 3x4 ;)
  71. voes

    Let's see those FM3 rigs!

    My current live setup: FM3 MX-12 3x4 Mission Engineering SP-1 Roland EV-5 Xvive U2 wireless Notice that all is powered by one power cable. MX gets power (and Midi IN/OUT) from the FM3 using a VF-cable MX is customized. The Midi Out component is not soldered (this is not needed...
  72. voes

    Voes MC-10 mk2 Midi Controller issues Transfering changes from PC to Controller

    I noticed that the MC editor was not up-to-date. Please download the editor again from the website (www.voes.be/downloads) Make sure to select VOES AXE_FX III FM3 EDITOR. And in this editor make sure that in GLOBAL the parameter FM3 is checked. Finally, it is important to use 2 Midi cables...
  73. voes

    Let's see those FM3 rigs!

    Sorry, no plans for that. The MX-9 and MX-12 are angled.
  74. voes

    Let's see those FM3 rigs!

    Don't know which one I should use :)
  75. voes

    FM3 Firmware 1.06 Public Beta 3

    Well said Leon! Couldn't agree more.
  76. voes

    Axe-Edit III 1.06.11

    Thank you Michael
  77. voes

    FM3-Edit 1.01.10

    Thank you Michael!
  78. voes

    FM3 Firmware 1.06 Public Beta 3

    Thank you!
  79. voes

    FM3 add FC6 or other alternative

    Check out the MC-5jr, MX-6 or MX-9 with 5, 6 or 9 buttons. Easy to program. Several templates to use in combination with the FM3. More info on www.voes.be
  80. voes

    Axe-Fx III Firmware Release Version 13.03

    Thank you Cliff
  81. voes

    Flattest/smallest DIN connector

    https://www.thomann.de/be/rockboard_flat_midi_cable_60cm_black.htm
  82. voes

    Axe-Edit III 1.06.10

    Thank you Michael
  83. voes

    Axe-Fx III Firmware Release Version 13.02

    Thank you Cliff
  84. voes

    please help! ax edit 0.9.191 dmg file

    This is the Apple editor? I only have the Windows editor.
  85. voes

    FM3 Firmware 1.06 Public Beta 2

    Thank you Bryan.
  86. voes

    FM3: G66 availability?

    Got it too! :cool:
  87. voes

    Using MIDI controller with FM3 (mapping)

    It's a known bug https://forum.fractalaudio.com/threads/i-cant-switch-scenes-using-a-third-party-midi-controller.164151/#post-1967884
  88. voes

    New BOSS SY-1000. The Hex-pickup is not dead. Long live the 13-pin plug!

    I thought that the SY-1000 was an upgraded version of the VG-99. What are the main differences?
  89. voes

    Axe-Fx III Firmware Release Version 13.01

    thank you Cliff
  90. voes

    MeloAudio Midi Commander

    The MC-5jr and MX-6 will do the job. They will be pre programmed any way you want before shipping, so it's just plug and play. More info on www.voes.be
  91. voes

    Axe-Edit III 1.06.08

    Thank you Michael
  92. voes

    Fixed I can't switch scenes using a third-party MIDI controller.

    In General Tab try setting "PC Mapping" to ON
  93. voes

    Fixed I can't switch scenes using a third-party MIDI controller.

    In Setup / Midi/Remote / Other you can set the Scene Select CC. Default is CC 34
  94. voes

    Fixed I can't switch scenes using a third-party MIDI controller.

    As far as I know, that is not possible. When using a PC message, you can only change the preset, which will active the stored scene of that preset.
Top Bottom