• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. T

    To Sell or Not to Sell the AX8 for the new FM3?

    I just said a bit of a pain, not that it’ll it be a detriment to my daily routine. As a backup in a performance situation, I’ll have to mirror the presets in one device to one running on a different architecture, especially making sure the levels are the same.
  2. T

    To Sell or Not to Sell the AX8 for the new FM3?

    On the wait list and planning to keep the Ax8 as backup initially. Bit of a pain because of the different architecture.
  3. T

    AX8 as controller?

    I don’t know much about MIDI. I was thinking of using my AX8 as a controller and as back up for an FM3. The wiki says the AX8 can only transmit Program Changes, not CC. I’m trying to figure out how limiting that would be. Is PC essentially on/off while CC is kind of a range? If so, I’m guessing...
  4. T

    Announcing the FM3 Amp Modeler/FX Processor!

    It’d be nice to be able to control it with the AX8, but I don’t think the midi commands would work.
  5. T

    Meaningful direction / links for a newbie AX8 user

    And Austin Buddy’s presets are great too.
  6. T

    SOLD Axe-Fx III and FCB1010

    Yes, I have the original box for the III
  7. T

    SOLD Axe-Fx III and FCB1010

    Axe Fx III in excellent condition. Comes with 3u EWI road case The FCB1010 is in good condition but works. A piece of translucent plastic covering has recently popped off and I can’t find it. $2200 including shipping and PayPal in continental US.
  8. T

    ZZ Top "Just Got Paid"

    I was a moron. Hadn’t updated to 3.02. Sounds awesome!
  9. T

    Upgrade AX8 to III?

    I have both. I just picked up the Austinbuddy Dream pack for the Ax8 which is a big improvement in tone for me. I’m probably going to sell the III. The Ax8 portability and cost make it a better fit for my needs. When Fractal comes out with a new version of the Ax8 I’ll get on the wait list as...
  10. T

    Wish Cut and paste row to other Preset

    With the ability to run two guitars it would help to be able to copy a row from one preset to another. For example if there’s a piezo setup that I like I might want to match it with different electric rows in different presets. Is there a way to do this already?
  11. T

    Ok, stupid question time again.... help?

    I’m a rookie but one way I delete all scenes in a preset is by saving a blank preset to the one I want to delete.
  12. T

    Three Amp Blocks?

    I just bought a III instead of the II because I’m crossing my fingers we’ll have 3 amps!
  13. T

    Axe-Fx III wait list: Let us know when you get notified...

    Waitlist confirmation: 2/4 @4:25a.m. Invitation: 6/14 @ 1:04p.m.
  14. T

    Acoustic through AX8

    I was looking for some resonator IRs for my single cone and found this link. It has single cone and tricone IRs along with some acoustic. I've been pretty pleased so far: http://line6.com/support/topic/20846-•••new-acoustic-guitar-irs-from-mama-bear•••/ It links to IRs in wav format that are...
  15. T

    AX8 USA/Canada Purchase Invitations

    Waitlist confirmation at 7:58 Eastern time on October 13 and received invite at 1:34 on March 4. Ordered!
  16. T

    AX8 - Any Updates?

    I'm torn with getting one of the AxeFx IIs on sale or waiting for the AX8. It would be easier if I knew what the price of the AX8 is going to be!
  17. T

    I'm Just Going to Leave This Here

    What about paying for effects instead? Just include amps, cabs, room for IRs and reverb. If someone wants more they can buy the FX8 or use their own pedals. i don't know the technical aspects, but could that be done with 1 DSP?
  18. T

    Request- Sliderig/1176 compressor type preset?

    It simulates 2 daisy-chained 1176 compressors for clean slide with sustain. Origin Effects :: SlideRIG Limiting Amplifier Pete Thorn has a nice demo of it on YouTube. YouTube I did find a nice write up for compressors here on the forum...
  19. T

    My own personal epiphany.

    This is probably my favorite "tweak". 5153 Green works well for me in the Tonestack with a variety of the amp presets. Quickest way to great amp tones for me.
  20. T

    Jammit PC & Axe2 as Audio Interface

    I was hoping to Tone Match with the Jammit tracks, but I'm not sure it can be done in the Axe if it can't use it as an audio output. Ideas?
  21. T

    Fun with Warped Vinyl

    Using an AxeFx II and a Thorn GT-R. Modern equipment to make something sound old. A brief take on Blind Willie Johnson's "Bye and Bye" intro SoundClick artist: tcb37 - page with MP3 music downloads All suggestions welcome...especially on how to make it sound "older". Thanks!
  22. T

    Lindley Dumble settings...help translating?

    Thanks for the help! I'll give it a shot. I also found this pic of Sonny Landreth's Dumble. The pic can be seen better here: Welcome to Flickr!
  23. T

    Lindley Dumble settings...help translating?

    Lindley/Landreth/Harper Dumble settings...help translating? I found some great picks of David Lindley's Dumble head with markings on it for his settings. Useful to anyone? I'm going to give it a shot. At the bottom of the page I also included Ben Harpers from the same article...
  24. T

    Selling/shipping overseas?

    How were the PayPal fees? Isn't there a premium for payments received from say, Germany?
  25. T

    Selling/shipping overseas?

    I'm sure many here have dealt with international sales of a used Axe Fx. How have you done it? It can't be a "Verified" Paypal address. Which shipper do you use and how bad are the forms? Thanks!
  26. T

    Electro-Voice Live X 112P arrived today (unboxing inside!)

    Just bought one used the other day and forgot to ask about the stink. I think a skunk lived in it. I put a question into EV but it's used so I don't expect much help. I was just hoping for a home remedy for the speaker's halitosis.
  27. T

    Any used/vintage high end FRFRs to look for?

    I was wondering about that. Is the major improvement in the FRFRs been in reducing weight while maintaining performance? Even the newer stuff is heavy though. Someone's been trying to sell a Tannoy VNET HP12 for a very reasonable price but it's 64 lbs!
  28. T

    Any used/vintage high end FRFRs to look for?

    Noobie question- Are there any older versions of high-end powered FRFR that are worth looking out for? I guess I'm wondering if an older FRFR might sound more transparent than a newer model QSC or Verve.
  29. T

    Continued support and updates for Standard and Ultra

    It's not Cliff's support I'm worried about. I'm worried about losing the updates from the big users like Scott, Yek etc who I borrow (alright, steal) sounds and IRs from. They'll be experimenting and developing their ideas on the II and their insights may not work with the Axe Classic.
  30. T

    Firmware upgrade tips & tricks for noobies

    Thanks MyGuitarabuse! The only difference I had ( I was using an Audiobox USB on a PC) was the order of steps. I had to do steps 5 and 6 before going to "Awaiting File". This worked for me: 1. Download the firmware to a folder and unzip it 2. Turn on AXE-FX and connect to AXE-EDITOR (via your...
  31. T

    Feature Comparison of Standard vs. Ultra

    There are 4 of the same Graphic Eqs and ParaEQs; all separately controlled. I "settled" for the Standard. I have occasionally hit the wall on the Standard if I'm running 2 amps in the chain with some effects or more often when downloading other people's patches. If playing in a coverband, I...
  32. T

    Searchin' for an Electro Acoustic preset

    This thread helped me if you haven't tried these yet: http://forum.fractalaudio.com/threads/29818-Fishman-Aura-IRs-for-everyone!?highlight=Aura
  33. T

    Reso Electric soundclip

    Thanks for the replies. Somewhat sloppy but it hopefully gets some of the tone across. Axe-FX Standard, no amp sim, Impulse Response (IR) someone here had made for a Spider Bridge Dobro setting from an Aura pedal (Top cabinet). I have another direct into a Tweed 12" (bottom cab) and then...
  34. T

    Reso Electric soundclip

    This was done on a Thorn GT resonator with a highlander pickup through the Axe FX Standard using one of the Aura IRs. Forgive the playing. Thanks http://soundclick.com/share.cfm?id=10080674
  35. T

    Wanted-MamaBear IR for Biscuit bridge resonator

    I've been using the MamaBear IR for spider bridge Dobro that's available with some success. I was hoping for some on input 5 (for Highlander pickup) and target instruments 15 & 16 (Single cone and Tricone Nationals). Long shot but can't hurt to ask. Thanks!
  36. T

    Reso-Electric with Axe?

    I thought it would be interesting to try some of the IRs with the resonator, then being able to toggle to the minihum and step on a pedal to change the fractal setting. Hopefully the standard will do the trick because I oredered one.
  37. T

    Reso-Electric with Axe?

    I picked up an Eleven Rack hoping to be able to change from resonator to electric on the fly through the same setup. I'm really struggling to get a decent resonator sound from the 11R. I was reading through some posts on here about IRs made for use with acoustics. I have a Highlander piezo in...
Top Bottom