• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. serge20261

    Cygnus /Austin buddy

    Is the tweaking mainly in amps eq or are all the blocks affected ?
  2. serge20261

    Cygnus /Austin buddy

    Sounds like a huge task to correct Can you hear much difference once you’ve sorted everything with Cygnus?
  3. serge20261

    Cygnus /Austin buddy

    My Austin buddy presets sound awful with Cygnus .I reset amp blocks and seems to make everything worse.What is this update actually doing in terms of parameters. Anyhow reverted back to 15 everything is fine again. Not hearing what the majority are hearing More then likely I’ve missed something
  4. serge20261

    Fender Acoustasonic patch

    Are there any preset for Piezo or acoustic modelling type guitars ? I’m assuming that I wouldn’t be using an amp in the preset is this correct
  5. serge20261

    Austin buddy 12.03 Volume between Scenes

    I’ll start by saying that these naked amp presets are awesome,however I’m struggling with volume levels,particularly for solos they are either way to loud or get lost in the mix.I use an atomic CLR,I keep the AXE 3 volume 1 at 1200 o’clock,the CLR is the main volume controller is this the...
  6. serge20261

    FC-6 how to move to next group of six presets

    I have 45 odd presets that have song titles and basically my setlist. My question is how to move from the first six songs to the next six etc
  7. serge20261

    Firmware 11

    I’ve noticed that since loading v11,my presets have changed, tonally should I be doing anything?
  8. serge20261

    AFIII Presets AustinBuddy's 1400+ Naked Amps TonePack - firmware 15.x TonePack for Axe-FX III Available; Cygnus update coming early fall

    I’ve just discovered that I need output 3 to go to the desk it has a 1/4” jack could I swap 2 and 3 so I can use xlr in 2
  9. serge20261

    AFIII Presets AustinBuddy's 1400+ Naked Amps TonePack - firmware 15.x TonePack for Axe-FX III Available; Cygnus update coming early fall

    FYI we cover Doobie Bro,Pink,Melissa Etherbridge,to Lenny kravitz,Thin Lizzy, Disco etc bit of everything
  10. serge20261

    AFIII Presets AustinBuddy's 1400+ Naked Amps TonePack - firmware 15.x TonePack for Axe-FX III Available; Cygnus update coming early fall

    I have purchased your naked amps presets and recently upgraded to V5.Noob question , where should I have the. Output level set ? I currently set at 12 o’clock is this optimum ? I run FRFR thru a CLR neo cab. I assume output 2 can be sent to the desk also at 12 o’clock? Friday night will be the...
  11. serge20261

    Copy-and-paste amp channel to new preset

    I just copied the channel I wanted and pasted, no idea how to paste to clipboard.
  12. serge20261

    Copy-and-paste amp channel to new preset

    I’m trying to copy and paste an amp channel into another preset,for some reason it copies across all the channels.The original amp is replaced with the amp and channels from the copied preset. What am I doing wrong ?
  13. serge20261

    Help with solo Aussie Band from the 80’s

    Wow ask for help on a preset - get a grammar lesson instead lol Thanks Unix-guy
  14. serge20261

    Help with solo Aussie Band from the 80’s

    The band is Sherbert Aussie users will know who they are the song is Howzat,I know it’s studio tricks,Id like to get as close as possible, particularly that harmonizing part after the initial slide,I’ve asked before but had no takers:(
  15. serge20261

    FC-6 Per-Preset programming

    Thanks Todd,I’m away till Monday,hopefully it’ll make some sense when I’m in front of the units
  16. serge20261

    FC-6 Per-Preset programming

    Can someone please give me a step by step,Ive read the manual Im a big noob cant figure it out
  17. serge20261

    FC-6 Per-Preset programming

    Thanks guys I've actually read the manual I just cant follow it,I need video instructions,does anyone know of any
  18. serge20261

    FC-6 Per-Preset programming

    Is it possible to save each preset individually for example if I’m on PRESET 1 I’d want SWITCH 1 to switch SCENE 5 & SWITCH 2 to switch to SCENE 3 etc etc if I now go to PRESET 2 I’d want SWITCH 1 to switch to SCENE 2 and SWITCH 2 to switch to SCENE 1 etc etc. I’m also wondering if anyone...
  19. serge20261

    Noob question on Send and Return

    What difference is there using the send and return ? I understand the differences in a real amp,just confused as to the advantage using them in axe 3.
  20. serge20261

    Scene ordering?

    Is it possible to to change the order of the Scenes For example moving scene 1 to 5
  21. serge20261

    AustinBuddy Naked Amps Tone Pack (still) Rules! ... New Website up...FM3...coming soon(ish)

    Is the Dream rig XL+ Compatible with the Mark 3 ? or will you be releasing a pack specifically
  22. serge20261

    Question on Scenes

    Thank you
  23. serge20261

    Question on Scenes

    I was talking about rearranging the scene order,moving Scene 1 to Scene 5 etc Can this be done ?
  24. serge20261

    Question on Scenes

    Probably asked before,can the scenes be rearranged by drag and dropping
  25. serge20261

    Strings type shimmer

    Thank you so much this should get me started,I notice your also in Oz land,the reason I’m after this shimmer is to emulate the opening chord of Howzat by Sherbert our vocals suck,this alternative works well
  26. serge20261

    Help on setup

    I’m currently running a power amp and guitar cab,my question is rather then mike my guitar cab,I would like to use one of the other outputs to front of house,I have absolutely no idea where to start. The obvious thing would be read the manual,I’m having a hard time following ,ideally a video...
  27. serge20261

    Strings type shimmer

    Are there any examples of synth string sounds anywhere,I’ve heard some samples on an Eventide H9 can’t recall if was a shimmer or the pitch block,definitely sounded lush and full
  28. serge20261

    FX8 and Synergy amps

    I also purchased the Morgan the DS and TDLX
  29. serge20261

    FX8 and Synergy amps

    I solved the problem,the synergy effects loop doesn’t like TRS cables once I changed them to TS all good
  30. serge20261

    FX8 and Synergy amps

    Yesterday I received my Synergy SYN2 and Synergy 5050 power amp,Ive connected the FX8 via the SYN2 Loop 4 Cable method,the first module sounds as though the time effects are post ,but when I switch to the second module it’s sounds awful the time effects sound pre Amp Any suggestions
  31. serge20261

    AustinBuddy Naked Amps Tone Pack (still) Rules! ... New Website up...FM3...coming soon(ish)

    I've purchased your naked amp pack and played thru some of them I'm absolutely blown away,I haven't been at all happy with my Axe fx till now thanks so much for such a great job. For my noob question,how would you recommend I setup for a lead patch ? I've noticed there is a fx loop in your...
  32. serge20261

    Glenn DeLaune Axe-Fx Presets Launch

    Are there 5 scenes per preset or just the one scene ? Are the presets volume matched from one to the other Usually when I purchase commercial presets,they sound nothing like the demonstration,even though I use a similar guitar to the demonstrator These presets sound great,hopefully they won't...
  33. serge20261

    cabIR.eu CORE 4 TONE starter pack

    I've also just purchased the pack,I'm having trouble loading them onto my XL+ all the cabs are ghosted,I have tried with Axe Manage Cabs,Import and Fractal Bot What am i missing
  34. serge20261

    Swiss army Presets

    I'm having trouble dialling in tones that put a smile on my face,are there any commercially available presets that go from crystal clns to solo? My main problem is getting a good gain sound, clns are ok I don't use much gain but like it tight and punchy
  35. serge20261

    Couple of hours with my XL+

    Thank you
  36. serge20261

    Couple of hours with my XL+

    Yes Kemper is much easier,all I've ever done is EQ adjustments IR's work out of the box for me
  37. serge20261

    Couple of hours with my XL+

    I put a looper patch in and recorded it,and then played the loop,any changes I made, went unnoticed there was no change regardless if I was EQ changing cabs no effect don't know what I was doing wrong
  38. serge20261

    Couple of hours with my XL+

    I was using my PRS McCarty 594 PAF style humbuckers
  39. serge20261

    Couple of hours with my XL+

    I received my Axe fx today,It came loaded with Firmware 8.01,are there any adjustments I should be making? Not totally happy with the sound,ATM it's sounding boxy,I'm going thru a RCF NX12 FRFR,the same FRFR Ive been using with my Kemper. I've also noticed that Bank A for XL+ is available are...
  40. serge20261

    Preset Questions

    I'm again the owner of an AX8,totally forgotten what little I knew prior To kick off the first noob question......,I have presets saved from an earlier firmware,is there anything I need to do,apart from installing the latest firmware to bring everything up to date Thanks
  41. serge20261

    Strings Preset Please

    Does anyone have a string Preset,I remember seeing one on an AX8,something close enough for the intro of living on a prayer Thanks
  42. serge20261

    Changing up and down switches on MFC 101

    can someone please tell me,if the up and down switches can be swapped,I prefer to have the up switch just after switch 5,at the moment when I bank up I hit the Edit/Save switch.
  43. serge20261

    AX8 Preset to Axe FX XL

    No I haven't,I don't remember where it was,do I have to download all banks?
  44. serge20261

    AX8 Preset to Axe FX XL

    Can anyone download that string patch fron the AX8 please
  45. serge20261

    AX8 Preset to Axe FX XL

    My band mate borrowed an AX8 he had a nice Orchestrial string type preset,that worked well with full chords How could I get a hold of the preset,will it work on my XL given that it's an AX8 Preset Could any one upload it if they have it Thanks in Advance
  46. serge20261

    AX8 Preset to Axe FX XL

    My band mate borrowed an AX8 he had a nice Orchestrial string type preset,that worked well with full chords How could I get a hold of the preset,will it work on my XL given that it's an AX8 Preset Could any one upload it if they have it Thanks in Advance
  47. serge20261

    Preset Volume Matching

    That sounds like a fantastic idea,but have no idea where to plug FS-6,and whatever preparation needs to be done,I'm getting around the Axe slightly better but still a noob.Would you mind explaining how to set this up? Thanking you in advance
  48. serge20261

    MFC Scene placement

    Than Thanks Chris your a legend,I will give it a go,I'll definitely have to make copies,one preset may be used in several songs with scenes altered accordingly.I suppose it's more of a memory thing,knowing that button one going to get the song started,rather then trying to remember what scene...
  49. serge20261

    MFC Scene placement

    Hopefully I can explain myself,I've recently purchased some Commercial Presets 5 scenes per preset,unfortunately I can't remember from whom but they sound great. Because the presets go from Scene 1 being clean gradually gaining up to lead on scene 5 My patches are set up with song names ,I use 5...
  50. serge20261

    Preset Volume Matching

    Thanks Chris I'll give it a go
  51. serge20261

    Preset Volume Matching

    This has probably been discussed before,I absolutely love the tones I'm getting out of the Axe,the most frustrating thing I encounter when playing live is the volume level between presets.I play in a covers band,the tones vary from ultra clean to heavily overdriven and everything in between. So...
  52. serge20261

    AX8 4CM HELP

    Thanks Chris,My connections are out L to Return,In2 L to Send, Out2 to Amp Input, have both out 1 and 2 out dialled and FX loop in Block
  53. serge20261

    AX8 4CM HELP

    I decided to pull out one of my amps,and connect the AX8 in the 4CM,I have all the Cabling correct,turned off cab and amp in the global menu,but I'm not getting any sound any suggestions??
  54. serge20261

    My Fractal Journey

    The first Fractal product I purchased when newly released was the Axe Fx Ultra,kept it for a few weeks and immediately sold it,went back to my beloved valve amps,vowing never to go modelling again. I then gave it another shot and purchased the Mark 1 when released,same thing,immediately sold...
  55. serge20261

    Noob question about Irs

    thank you
  56. serge20261

    Noob question about Irs

    Can I use cab packs purchased for my Axe XL for the AX8
  57. serge20261

    Presets copying each other

    Happy to report that I did the gig without incident,don't know how but I'm thinking it was the nut behind the wheel (me) that caused issues.
  58. serge20261

    Presets copying each other

    Have contacted support,One thing I forgotten to mention,the volume dropped significantly across presets
  59. serge20261

    Presets copying each other

    Not quite sure how this happened,I had the axe fx XL,connected to my computer and the MFC connected via Fastlink,Some presets have been erased and some duplicated in other locations.
  60. serge20261

    String synth sound found on youtube

    searching for some string sounds that I could play over,I came across this demo ,is this patch available ? sounds like it needs an instruction manual to use it. I'm going into a guitar cab,would this work okay with the latest firmware. Are there any others out there that are similiar
  61. serge20261

    Video - Moke's Axe-Fx ll Preset Tour and Demo/Tutorial - Part #4

    Where do I find your presets for purchase ? I'm only seeing 1 arist/song preset tie your mother down is all I can find Will you be doing preset requests?
  62. serge20261

    Video - Moke's Axe-Fx ll Preset Tour and Demo/Tutorial - Part #4

    Love your work,happy to purchase your presets,your store has only one preset☹️
  63. serge20261

    Preset Help .....no takers

    Thank you so much I'll check it out
  64. serge20261

    Preset Help .....no takers

    Ive been trying to harmonise the solo of Steve Lukathers Hold the line,the last couple of bars,I have asked if anyone could do it for me even offered payment for their time.I know you guys are very helpful,so I'm wondering can it be done ?, maybe it can't I don't know,but I do know I,can't get...
  65. serge20261

    Wish Display song name instead of preset name in song mode

    I'm using scenes,usually 1 intro,scene 2 verse & 3 chorus scene 5 is always solo on all scenes,works well for me
  66. serge20261

    Wish Display song name instead of preset name in song mode

    All of my user presets are actually song titles,would alleviate your problem
  67. serge20261

    MFC Edit Questions

    Thanks I'll give it a go,sooner or later I'll get a grip on it
  68. serge20261

    MFC Edit Questions

    Thanks for that I don't understand why it was accepting it was trying for weeks. I've tried connecting to the MFC,have no idea if I'm doing it correctly,this is what I have The usb from the axe connected to my computer the MFC connected via Fastlink is this correct
  69. serge20261

    MFC Edit Questions

    I have Purchased MFC edit,unfortunatly had to contact support as it was not accepting my registration, they are waiting on me to install I viewer,so that they can access my computer to establish my registration failure. Apart from that,I've been looking at their trial version,can't understand...
  70. serge20261

    Peterson Stomp classic into Axe Fx

    Thanks for the suggestion,hasn't solved it though
  71. serge20261

    Peterson Stomp classic into Axe Fx

    The tuner is fine plugged into another amp .The AxeFx hum only increases once the tuner is plugged in otherwise pretty good.
  72. serge20261

    Peterson Stomp classic into Axe Fx

    I would love to use the axe fx tuner,it reads the wrong notes it jumps erratically,I've plugged ever guitar I have it makes no difference new strings old strings,bridge pickup,neck pickup,decrease my volume on the guitar Can't get it to work,don't know what else to do
  73. serge20261

    Peterson Stomp classic into Axe Fx

    I'm running in front ,tried both powered and battery,swapped leads no luck
  74. serge20261

    Peterson Stomp classic into Axe Fx

    Trying to connect my Peterson tuner, Guitar - Tuner In / Tuner out into Axe Fx I'm getting a lot of extra hum,when I connect the Peterson and wondering one if anyone else is experiencing the same and Two is there a work around,can't use the Axe Tuner way to unstable.
  75. serge20261

    Why is this happening (vid attached)

    Ok that's sorted,I'm having trouble with the tuner on the axe,it bounces around,and displays the wrong notes I connected my trusty Peterson,I believe it is the culprit,once I disconnected all good again.Would still like to know it happened though
  76. serge20261

    Why is this happening (vid attached)

    Here is the patch
  77. serge20261

    Why is this happening (vid attached)

    All presets are sounding bad,running the latest firmware,didn't do anything apart from turning it on
  78. serge20261

    Why is this happening (vid attached)

    ATM I'm having a love hate relation with the Axe,when I get it right it's awesome,I turned it on today and seems as if gremlins have invaded it,hear attached video,the overdrives are off ,the noise floor is unacceptable,have only just noticed the the LEDs on the input are lit with the exception...
  79. serge20261

    Help with Patches Willing to PayPal Desperate

    Thanks I'll give it a go
  80. serge20261

    Help with Patches Willing to PayPal Desperate

    ATM I'm using a 4 X 10 Mesa lonestar cab,also have a couple of other cabs 2x12 Mesa rectifier cab etc I have half a chance of dialling an amp,where I become unstuck is the effects,harmonising etc I would be very happy to pay Pauly,without help I'll have no chance Serge
  81. serge20261

    Help with Patches Willing to PayPal Desperate

    I have a Axe Fx XL running thru Mesa Fifty power amp into a guitar cab I have tried to replicate the guitar tones without success,willing to PayPal $50 for both,providing they are ballpark. Below are the guitar tones: Sherbet Howzat (main sound and solo ) Toto Hold the line (Main and Solo...
  82. serge20261

    Volume pedal front of amp how to

    As you said guitar out to volume in -out volume to amp,so that it worked the same as rolling my volume on the guitar
  83. serge20261

    Preset Help Please

    can anyone replicate the guitar tone both rhythm and solo on this song
  84. serge20261

    Volume pedal front of amp how to

    For years I've been using a volume pedal,instead of my guitar volume knob.ive tried the same procedure on the Axe fx - guitar -input of volume pedal and out - input of Axe,it's very noisy so I abandoned that idea. I know I can plug my EV-1 into the back of my MFC,what other things should I be...
  85. serge20261

    Radical Axe FX Tuner

    havent posted this in bugs I'm sure it's the big bug that's the problem,when I tune my High B and E strings standard tuning,on the B string although in tunes reads G same as the Low E which insists on Reading A I've checked with my Peterson strobe all good.ive tried to connect my Peterson to...
  86. serge20261

    Downloaded patches not working

    As always thank you very helpful,what happens if there is no amp or cab block,pretty sure I found some synth patches from Simeon Harris I wanted to download without success
  87. serge20261

    Friedman ASM Boomy

    Will the global EQ,EQ all amps
  88. serge20261

    Friedman ASM Boomy

    Thanks so much I'll try it tomorrow and let you know
  89. serge20261

    Friedman ASM Boomy

    Do you have an ASM
  90. serge20261

    Friedman ASM Boomy

    Darn,am I right in saying that,I can download axe II patches but you can't download XL Patches
  91. serge20261

    Friedman ASM Boomy

    Thanks for your suggestion I'll give it a go,noob time is the EQ under Global switch
  92. serge20261

    Friedman ASM Boomy

    Unfortunatly the Axe is in our rehearsal room in another location,I didn't even know that there was a global EQ The K12 are definaltly not low end heavy,the ASM is I'll try to download a patch tomorrow for you albeit it's just the standard presets haven't really tweaked them such as the JCM 800...
  93. serge20261

    Friedman ASM Boomy

    I'm just settling in to this new technology,after having my XL for a couple of days I received my Friedman ASM today. I know a lot of you guys love them,for me not so,having said that I'm sure there's a plethora of settings I've yet to discover. In my humble opinion they are boomy,very fllubby...
  94. serge20261

    Downloaded patches not working

    Done that ,it has a cab,from memory I disengage the volume blocks still couldn't get it working
  95. serge20261

    Downloaded patches not working

    Recently dived in and purchased an axe XL,tried to download a Lenny Kravitz patch I recall there were two When I loaded it I couldn't get sound any suggestions ? I have come across this a couple of times,what should I be on the look out for Thanks
  96. serge20261

    Help setting up preset/scene/effects

    Is it possible,to have the bottom switches for scenes,the up and down changing presets,the others for effects etc.I have an FX8 my patches are basically setup like a setlist,I just toggle to each song and select my scenes within the song,no pressing reveal just up and scene buttons,is it...
  97. serge20261

    Help setting up preset/scene/effects

    I'm a complete noob,I've installed the editor,for some reason it's the trial,even though I purchased,will have to emai them to sort it out. Ive gone to good old youtube,found a instructional video,just confused the crap out of me,why so complex.Need to look at RJM Mastermind GT editor so easy...
  98. serge20261

    Help setting up preset/scene/effects

    I'm waiting for my MFC Mark 3 to be delivered Is it possible to have the bottom five switches as Presets the middle row of switches as scenes and the top row dedicated to switching effects etc ? A friend of mine has loaned me a mark 2 not having any luck achieving the above setup.Can someone...
Top Bottom