• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. mortega76

    FM3 into an Alto TS315, couple questions.

    I have the 650's and they do sound great indeed! I prefer them over my BD DT 770's. For Sonarworks... have you found a way to profile a single mono speaker?
  2. mortega76

    tuner question

    Oooh... this is pretty cool. The only option I can think of is to pull up on the volume pedal just enough to disengage the tuner.
  3. mortega76

    FM3 into an Alto TS315, couple questions.

    I re-ran my Pink Noise Match to 13 bands and ended up with these 10 bands that even at low volume (wife is asleep) adds more mid detail. I'm trying to set this up to not have to take my Mesa Triple Rec with Mesa 2x12 Cab out to gigs any more.
  4. mortega76

    FM3 into an Alto TS315, couple questions.

    Thank you for the quick response! After you mentioned that the Global EQ can be changed to Parametric, I did some digging and found the setting! Thanks for that! I was a bit disappointed that Band 1 and Band 5 are hard coded for Shelving instead of Peaking. So I'm stuck using the PEQ 1 block...
  5. mortega76

    FM3 into an Alto TS315, couple questions.

    Hello All... I am still getting used to my FM3 connected into my Alto TS315 and I wanted to ask a couple questions. I currently have a Parametric EQ as the last block in my preset from pink noise test with a Sonarworks XREF20 mic (ear level) to adjust my Alto TS315's EQ curve to make it more...
  6. mortega76

    FM3 with Hotone Ampero Issues

    On a similar note... every time hear someone say 'they are a hoe' I always respond with 'who da hoe?' Then I answer myself with 'Idaho'.
  7. mortega76

    FM3 with Hotone Ampero Issues

    Still getting used to the FM3 menu... setting it to Virtual Toggle and Normally Open/Momentary Make require two taps to enable/disable the Tuner, I defaulted everything back to Follow Hardware and Normally Closed/Momentary Break and it worked with just one click. Now I have the Tuner on the Left...
  8. mortega76

    FM3 with Hotone Ampero Issues

    Oh wow! Thank you for the detailed walk-through lauke-lux... I'm booting up my FM3 now. Thanks a bunch!
  9. mortega76

    FM3 with Hotone Ampero Issues

    That would be great! Thank you for the info!
  10. mortega76

    FM3 with Hotone Ampero Issues

    I'm sorry I had so many terms in my first post... Yes I have it connected to Pedal 1 input jack in the back of the FM3 and under I/O I have Pedal 1 Setup as 2 Switches (Tip+Ring). I ran the calibration option but the left button/trigger/switch (whatever it's called) enables the calibration to...
  11. mortega76

    FM3 with Hotone Ampero Issues

    Thank you for the responses guys, very much appreciated! The Ampero was said to work when I searched here in the forum. It's a Hotone Ampero Switch 2-Way Momentary Dual Footswitch Foot Controller 1/4-Inch Pedal Switcher (FS-1(Ampero Switch)) Are you saying it's not compatible with the FM3?
  12. mortega76

    FM3 with Hotone Ampero Issues

    Hello all... I just purchased the Hotone Ampero and have it connected to Pedal 1 and under I/O I have Pedal 1 Setup as 2 Switches (Tip+Ring). I Calibrated the pedal but only the left button does anything. I tried to search for "Hotone Ampero" and found this link that mentions changed the type...
  13. mortega76

    FM3 with Alto TS315 flat IR?

    Thank you guys for the info... I've actually tried to use REW in the past without success. I'm going to try it again and follow this video. With regards to the 2nd cab... I wasn't aware of that. Damn...
  14. mortega76

    New FM3 Owner!!!

    Please disregard my tuner issue... for whatever reason it is working as expected, maybe I just had a brain fart of some kind.
  15. mortega76

    FM3 with Alto TS315 flat IR?

    Good Evening, I have an Alto TS315 that I want to use with my new FM3. I have Sonarworks with the reference mic and I wanted to somehow create a flat EQ IR and import into the FM3 to use with the FM3. Unfortunately, Sonarworks only works with a stereo setup and I only have one Alto TS315. I...
  16. mortega76

    FM3 Re-amp has extra 'oomph/hiss' that shouldn't be there.

    I seem to recall back in Axe-fx II days about a 'fix' to clear up the re-amping from being a little too overdriven. I seem to recall something about having all the File bit depths set to 24-bit which I currently have all of them set to (Record/Render/Import) in Cakewalk. I'm still getting an...
  17. mortega76

    New FM3 Owner!!!

    Thank you for chiming in, I have not changed my strings in a bit but how would it only affect the FM3 tuning and not Polytune 3 or DAW tuning?
  18. mortega76

    New FM3 Owner!!!

    Another thing that I will add... is that most amp sims feel great but most sound dark. Which is what they probably sound like with the given mic in the given room. There's just something special about the Cameron CCV and the 6505 that I absolutely love! The two amp sims that I was disappointed...
  19. mortega76

    New FM3 Owner!!!

    Hi Yek! I'm happy you remember! You must be like me... I can't remember what I did a couple hours ago but when it comes to music or technology, I never forget! During those three or so years I've been gigging with a Triple Recto into a 2x12 Mesa cab and I've been happy overall. It might be a...
  20. mortega76

    New FM3 Owner!!!

    I've been a looooooooooooooong time Fractal User... started back in the Standard days but I waited (and by waited I mean I had to save my pennies and get permission from my wife) and luckily the Ultra came out shortly afterwards. Played the Ultra for several years and I then bought the Axe-fx II...
  21. mortega76

    FS Mesa/Boogie Triple Crown TC-50 - 50-watt Tube Head - $1,800 (San Antonio, TX)

    Looking to sell my Mesa/Boogie Triple Crown TC-50 - 50-watt Head for $1,800 or trade for an Axe-fx III.
  22. mortega76

    SOLD Friedman PT 20 with Runt Cab

    Sold
  23. mortega76

    SOLD Friedman PT 20 with Runt Cab

    Updated, added pic.
  24. mortega76

    SOLD Friedman PT 20 with Runt Cab

    Single Channel - 20 Watts - Handwired; The Friedman Pink Taco is the baby sister to the critically acclaimed BE-100, created for the many musicians who have been begging for the Friedman sound in a small, compact, lightweight, manageable format. The Pink Taco is a super versatile hand-wired...
  25. mortega76

    SOLD Kemper Rack + Remote + 100's of Profiles...mint...$1500

    Hey there... It actually sounds really good. I hooked it up to my 4x12 and it was able to hold its own during the couple practices that I used it on. For me, it's essentially just sat in my game room, usually mainly VST's for recording.
  26. mortega76

    SOLD Kemper Rack + Remote + 100's of Profiles...mint...$1500

    Any thought to a trade for a Friedman PT-20 and a Runt 1x12 cab?
  27. mortega76

    WTB Looking to trade AX8 for Fx2

    PM’d
  28. mortega76

    Amp Matching Tutorial?

    I've been a long time Axe-fx User and I've been using my Mesa Triple Rectifier almost exclusively since I can't seem to match the tone in the Axe with what I'm getting with the Triple Rec. I did a search for a video tutorial on how to amp match but I only see how to tone match which doesn't go...
  29. mortega76

    WTB Your Axe-Fx II for my AX8

    Just to confirm, you said in the PM that you had an Axe-fx II XL but here you said you have an AX8...
  30. mortega76

    FS FS: Fractal AX8

    Hi, I'm in San Antonio if you're looking to trade for an Axe-fx II MK1
  31. mortega76

    WTB Your Axe-Fx II for my AX8

    click on the little envelope next to your forum name on the top right corner, you should see pm 'conversations' there.
  32. mortega76

    WTB Your Axe-Fx II for my AX8

    PM sent
  33. mortega76

    Modeler Stress Test

    1 Real Amp (The low end sounds thick and smooth, the high end sizzle sounds great, especially with that ending open chord) 2 AFX3 (Sounded very similar but it felt as if it didn't have the same input/gain and it missed a bit on the sizzle) 3 Other Modeller (Very thin with much less of...
  34. mortega76

    Axe-Fx II "Quantum" Rev 9.00 Beta

    Any chance of a Mesa Triple Recto channel 2 and 3 in a future update?
  35. mortega76

    Axe-Fx II "Quantum" Rev 9.00 Beta

    Gotta plugin my Axe-fx II back up and see how it compares to the Triple Rect now...
  36. mortega76

    Axe-Fx II "Quantum" Rev 8.02 Firmware Release

    Can I double like this post?!?!
  37. mortega76

    Goodbye Old Friend

    I have family members who can't have kids an their animals are their life. Sorry to for your loss Cliff...
  38. mortega76

    Reamped tone always sounds worse

    I had a similar situation years ago... every re-amp attempt sounded like it was overdriven and noisier than the 'original take'. Turns out that in my DAW (Sonar) I didn't have all the sampling setup correctly. Once I changed everything to 24bit (I think there were 3 or 4 settings) it was as good...
  39. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    Hey there Philip... Wow, that MC6 looks like a little beast! Just saw a video where firmware 2.0 allows for tuner feedback! I may just sell one of my FCB1010 (I have three, don't ask...) and get one of these bad boys. Thanks for the info!
  40. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    I'm glad to hear that I'm not just hearing things in saying that the Triple Rec does not sound like the Dual Rec... Much more low end clarity and thickness. Having everything set almost to noon on every dial except master (I think I have it set a little past noon on the gain) on the Red channel...
  41. mortega76

    Advice to Liven Up Cab/FOH Sound

    Curious as to what Mesa amp and cab you are using... One possibility (don't know if it's possible if you're using it in the fx loop and how that works with the Axe-fx) is to run your Mesa head/cab on stage and feed the FOH another chain from within the Axe-fx on separate amp/cab blocks... that...
  42. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    I'm just going by what he told me... hahahaha. I've switched the virtual tubes in the Axe-fx and really don't notice any real difference either.
  43. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    I wouldn't have thought that there would have been that much of a difference between the Dual Rectifier and the Triple Rectifier but apparently there is. While in search of "Axe-fx like" effects at a super low budget I came across the Digitech RP360XP (not saying it's anywhere close, just saying...
  44. mortega76

    FracTool - ultimate multitool for FAS devices

    Ok, then I must be going crazy...
  45. mortega76

    FracTool - ultimate multitool for FAS devices

    Curious as to why this got unstickied?
  46. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    I tried to use the second to last preset 383 I think... to do a tonematch when I had it in 4CM but I don't know what the heck I was doing. It blew my ears out a couple times in the process of trying to do that. It would be nice to get a tonematch of just the amp against the amp sim to see the...
  47. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    Thank you so much for the input fellas... Finally had a chance to A/B it at practice with my Marshall 4x12 with V30's. They did sound very similar but there was that 3D low end that was missing a bit. I cranked it and it was still pretty close, the only issue was that the Axe-fx amp sim sounded...
  48. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    No kidding it's annoying as... Well you know. Just now I tested my Axe with the Recto in 4CM and it was a bit strange because it sounded out of phase and then I changed the channel in the back and then it sounded ok. I then muted the FX Loop and added an amp block and they had a similar...
  49. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    Went in today with a fresh pair of ears and on first test my global settings made the Axe-fx sound muddy, I adjusted it and it sounded a bit cleaner. Turned on the Triple Rec and it sounded much cleaner on the low end and a bit more pronounced. Dammit... Had to stop because I'm getting fiber...
  50. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    Finally had a chance to play at a much louder level so I've been messing with my Axe-fx and comparing it to my Mesa Boogie Triple Recto through my Mesa 4x12 (slat oversized I think)... After way too much advanced adjusting I finally changed the global EQ. I actually have it sounding better than...
  51. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    Just had a chance to load up Quantum 7 and test it out side by side with my Triple Rec into the same 4x12 Mesa Cab, unfortunately it was almost midnight and in my garage that I know I would have woken up the neighbors if I had turned it up at all. At low volume with everything at noon except for...
  52. mortega76

    After 10 years, I'm done...

    Damn... even better than the Mesa 2:90?!?!? Wow... what other SS power amps have you tried? I've been wanting a Matrix for years as well and you're not making it any easier for me! ;-)
  53. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    There's no need... The real thing is anything but flub.
  54. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    One more question, will this also translate to the Orange Modern Channel as well? Just started using it at last night's practice. Much more aggressive. Thanks again Cliff!
  55. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    HOLY MOLY! Was not expecting this! Thanks a bunch Cliff... Oh man I'm crazy excited now! Yes we do tune down to Qb. ;-)
  56. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    Thanks for chiming in Bill... I've actually had my eye on a pair of Seismic 15 inch coaxial speakers but I just spent some good cash on some Mesa Boogie gear so it may have to wait until I can sell something. Just don't know what!
  57. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    Sorry for the delayed response... my kids have been sick for almost a week and since Wednesday afternoon I've been sicker than a dog. I'm still sick! But when I heard that Cliff dropped the new beta I had to check it out. With regards to the frequency, I believe it defaults to around 109 and...
  58. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    Yes I adjusted it with palm mutes to get the most 'umph' but it really only made the sound woofier instead of fuller.
  59. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    Thanks for chiming in fellas... I'm going back and forth with the Triple Rec and then shutting it down and plugging in the Axe-fx/Solid State Power amp into the same cab. As I mentioned previously, I've had a similar sound through several different power amps.
  60. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    If I'm defaulting the amps and resetting system parameters then why would I have been having so many issues with multiple power amps but as soon as I plug a tube amp into the same cab (in this case a Marshall 1960 with v30's) which sounded thin and lifeless on just about every amp sim, sounds...
  61. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    How can this be a loaded question? My current rig is an Axe-fx II into a Solid State Power Amp (which would require me to enable power amp simulation and disable cab simulation to have a 'proper' setup) into several cabs and I'm trying to keep the Solid State portion of it to avoid tubes at all...
  62. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    Hahahaha... no kidding! Like I've said in the past, I wonder if low gain amps don't have an issue but higher gain amps might?
  63. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    Thanks for the replies fellas... THIS is why your tone sounds great... I'm trying to cut out the TUBE part. What kind of success are you having with a Solid State Power Amp?
  64. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    To add to this, every time there is a major firmware revision update I run a reset system parameters... And every firmware update I reset amp sims to defaults by pressing/hold the bypass button. Thoughts?
  65. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    I've used several power amps and they've all generally felt/sounded the same. I've used a QSC GX5, (a buddies) QSC RMX 2450, Carving TS100, Carvin F1200 (same as Cliff used to use), Carvin D1504L, Peavey PV2600 and now I'm using some no name brand ATL-AUDIO CRX450 that sounds no different than...
  66. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    What am I doing wrong with my Axe-fx?
  67. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    So I just got home from my first practice with an actual tube amp. It was spectacular. I plugged into my new Mesa 2x12 and it sounded really good on channel 2 Vintage mode. I tried it on Channel 3 and I initially didn't like it but I changed some of the settings and then I was able to find a...
  68. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    P.S. it's gonna be weird leaving my Axe-fx at home for the first time in a looooong time.
  69. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    I used the Recto1 Orange Normal (?) with the high maxed and the set the "Dynamic Depth" to 8.5 and man what a difference that made. Still not 100% but definitely more meatier. The "low resonance frequency" sounded like it was just farting out when I was dialing it in with palm mutes so I just...
  70. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    Hi there Matt, so if I'm running two 8 ohm cabs I plug them into the two 4 ohm outputs instead of the two 8 ohm outputs?
  71. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    Great info cyberymgk, thank you. So basically, always have it plugged in if you're planning on turning it on. Another reason I want to stay away from tubes!!!! Rex: What do you use for your setup that has you happy with the power amp simulation? Randall d: Yes, I used the same cab (first the...
  72. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    See this is the reason why I want to stay away from tubes! So you're telling me that having it on standby still requires a cab load? The back of the amp has slots for one 16 ohm, two 8 ohm and I think two 4 ohm cabs. If I have two 8 ohm cabs plugged in can I safely unplug one? OK, will do on...
  73. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    I initially had the Axe MV at the default noon setting and it still lacks that "body". Are you saying that I should have it past that even if the channel 2 MV is at 6 o'clock on the amp? I wouldn't think that the authenticity of the MV would deviate that much. I'm really leaning towards that...
  74. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    I first dialed in the Triple Rec Channel 2, strummed a couple chords and then put the amp on standby (not used to this since I've only ever had solid state power amps and one solid state Marshall amp), unplugged the speaker and connected it to the power amp that is connected to the Axe-fx. I...
  75. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    Thanks for the quick responses... I will definitely try to adjust the "Dynamic Depth" and "low resonance frequency". The reason I had the MV so low was to match the MV on Ch2 of the Triple Rec... Man... That thing can get loud super fast! I will adjust with my ears instead of my eyes next...
  76. mortega76

    NGD: Finally got myself a tube amp! Need tone help with Axe-fx

    I've been struggling with my guitar setup for years... Long story short, today I got a 1998 Mesa Boogie Triple Recto, Mesa 4x12 and a Mesa 2x12 for a killer price. First time I've ever been able to A/B from the comforts of my own home. After cleaning it all up I dialed up some tunes. I don't...
  77. mortega76

    Axe-fx II... cabs, what am I doing wrong?

    Thanks for the information fellas... Hey there Matt! Long time no see! I'm still trying to make the Axe-fx work when compared to real amps... definitely let me know when you guys get together. Definitely would love to hear the Axe-fx through some good FRFR speakers. I definitely trust your...
  78. mortega76

    Axe-fx II... cabs, what am I doing wrong?

    I should add... I'm really just looking for the best all in one cab that has great lows/mids and highs... it may just have to be the Genz with a V30 and 75 especially with it's ports.
  79. mortega76

    Axe-fx II... cabs, what am I doing wrong?

    I've heard that about the 75's as well... I'm starting to think the wood of the Marshall cab may have a lot more to do with it. Especially since the 2x12 Orange V30 cab sounds thick with mids to die for where my Marshall V30 4x12 has very little lows or mids. I did test it with my Axe-fx with...
  80. mortega76

    Axe-fx II... cabs, what am I doing wrong?

    Thanks for the quick responses... Yes power amp sim on and cab sim off... I've gone through several power amps. Carvin T something or the other (The one Cliff originally used back in the day), a Carvin D1504L that I blew out on stage last year because they had me plug into a plug that was meant...
  81. mortega76

    Axe-fx II... cabs, what am I doing wrong?

    I've been through a couple cabs with my Ultra/Axe-fx II... Line 6 Flextone 4x12 - Custom Celestions - Dark and Muffled (sold years ago) Marshall 4x12 - Celestion G12T-75 - Dark but agreesive Marshall 4x12 - Celestion V30 - Bright with no low end Genz Benz GFlex 2x12 - GBE 1240-V75 - Dark and...
  82. mortega76

    Axe-Fx II "Quantum" Rev 7.00 Public Beta

    Oh man, I hope this drops tonight or early tomorrow so I can test it out during practice tomorrow!
  83. mortega76

    Axe-Fx II "Quantum" Rev 6.02 Firmware Released

    Just in time! We have practice tomorrow night! Big thanks once again!
  84. mortega76

    A big thanks to Cliff

    Thank you for the info Hubertus!
  85. mortega76

    A big thanks to Cliff

    Cool post. Now if only I knew what the "ability to control the saturation of the cathode follower" actually did/was, and where it is in my Axe I'd be golden!
  86. mortega76

    Bass tone match, what am I doing wrong?

    You're always going to have problems with low (or clean) distorted tones (guitar or bass)... the dynamics are just too much for the tone match to get you something remotely close. Same thing happens with vocals... It can get you close but it never sounds identical like a distorted tone because...
  87. mortega76

    Cliff, Get rid of the older firmware modeling options to free up space!!

    So if I'm understanding this correctly, the 1% (or 6% so far) want to be able to have their cake, eat it and own the factory too? While everyone else can go screw themselves as long as they can go between modelling revisions at a moment's whim? Why is this even a debate? As I'm sure someone else...
  88. mortega76

    Axe-Fx II "Quantum" Rev 4.01 Public Beta

    Current Axe-fx II Mark I user here... it would make sense to EOL (End-of-Life) the selection for modelling and keep only the most current if it gets us more updates. Since the people who would want to keep all the previous modelling options would have been technically EOL'd on 4.01 either way...
  89. mortega76

    AxeFx II XL keeps rebooting repeatedly

    Sounds exactly like what I was experiencing... my issue turned out to be a loose internal power switch cable. http://forum.fractalaudio.com/threads/axe-fx-ii-mark-1-will-no-longer-boot-after-q3-03-update.117075/#post-1397790
  90. mortega76

    Buzz On Tesseract Clean Patch

    Sounds like monitor interference that your pickup is 'picking' up. I would need copies of all your Tesseract presets to confirm on my Axe-fx. ;)
  91. mortega76

    Eq for different cabs / FRFR

    The best solution would be to monitor live/home using the same exact setup. I've heard of some folks using the Atomic Coaxial in a stereo setup for studio monitor and then using those same FRFR speakers in a live environment. The only problem would be the rooms that you will be monitoring in...
  92. mortega76

    Sorting out the high end?

    Wait, so this guy bought the most technologically advanced digital processing unit to date and didn't bother to read the instructions on how to properly connect it to his existing setup and is now complaining that it doesn't sound good? Sounds like something I would do... ;-)
  93. mortega76

    Axe-fx II Mark 1 will no longer boot after Q3.03 update

    I just told myself that I should try to open the case to see if there are any bulged capacitors or loose cables and sure enough the red cables that plug into the power switch were loose (1 out of 4 were loose). Pushed it back in and it booted right up. It's very loose though, so it could slide...
  94. mortega76

    Axe-fx II Mark 1 will no longer boot after Q3.03 update

    Hello Everyone, It's been quite a while since I posted anything... Well, I've been on 3.02 for a bit now, and I finally decided to update to 3.03. Here are the steps I took. 1. Downloaded 3.03 firmware for Mark 1 and updated Fractal Bot after being prompted to do so. 2. Booted up the Axe-fx...
  95. mortega76

    FASFX-AMP

    I'm pretty sure Cliff was responding more the the Axe-fx VST (Axe-PC) more so than the 'ala cart'... I can't even imagine the headaches that FAS would have to endure if they ever went 'ala cart' with anything.
  96. mortega76

    Firmware Development Implications

    That's a question that's been asked SINCE the Ultra (and Standard days)... the real truth is that this is an ever evolving platform (the Axe-fx family of products). No one has ever been forced to update to any given firmware, and if a person can be happy with the functionality or 'quality' of a...
  97. mortega76

    Axe-Fx II Quantum Rev 3.00 Public Beta

    Cliff has said it before, when a firmware has the possibility of changing the sound to the amp/drive blocks a new (ex.) xx.00 will be created. If it is just bug fixes or more amps, more effects, added features, etc... it will be a 2.xx change.
Top Bottom