• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. Moke

    FM3 Presets [Moke's Custom Presets] FM3 Master Thread - Firmware 3.xx/4.xx now available

    Updated 3 more 'Humbucker' versions of my "Artist' FM3 presets to firmware 4.01 'Cygnus'. All of them have had the Amp and Delay blocks reset, and are also compatible for 4.01. No need to perform the new 'Update All Presets' command in the Utilities menu with these. The 'Detroit Rock City'...
  2. Moke

    AFIII Presets [Moke's Custom Presets] Axe-Fx III Master Thread - Updated to Firmware 14/16 'Cygnus'! New 'Triple-Gain' (HB) Versions

    Updated 3 more 'Humbucker' versions of my "Artist' Axe-Fx III presets to firmware 16.05 'Cygnus'. Contact me to report any presets that have stopped working, or that sound really 'off'. I will try to get a few more done as soon as I can Moke's Another Rainy Night V2.3 (HB) 'Axe-Fx 3' (16.05)...
  3. Moke

    Wish "Global" Low Req Freq for Amp Block

    Not what you wanted, but there is a new 'Batch Setter' function in the editor that would allow you to change that parameter's value for a specific channel, or all channels of multiple presets.
  4. Moke

    The Mother of All Effects Blocks Thread (Multi-Model Edition)

    Mine uses an expression pedal, so not sure if it was me? Sorry for the de-rail. Only posting because of the mention.
  5. Moke

    Wish Can we have a couple more VolPan instances per preset?

    I was thinking that maybe you were using scenes to select them? If you are manually switching this, then you will need 4 blocks to do that. But there are a lot of low CPU blocks that can pan their outputs.
  6. Moke

    Which type of external switch would allow me to tap for next preset and hold for previous?

    Oops:oops:, You are correct. Had the FM9 on my mind.
  7. Moke

    Wish Can we have a couple more VolPan instances per preset?

    Thanks Marcel, You could also explore selecting which outboard loop is active by panning the signal as it is sent out of the Out 3 and Out 4 blocks instead of the returns. One channel panned Center (both connected effects receive a signal) One channel panned Left (only the left connected...
  8. Moke

    Which type of external switch would allow me to tap for next preset and hold for previous?

    The FM3 unfortunately does not support a dual switch into a single jack via a TRS cable. (Sorry, Fake News:D) If you are only wanting to add 1 switch, a single, 'momentary', 'normally open', switch with a standard TS cable will work fine as a 'stand-in' switch. I've been stomping on one of...
  9. Moke

    Wish Can we have a couple more VolPan instances per preset?

    Do you ever need to use both outboard effects connected to 'Input 3' or 'Input 4' at a time? If not, a single Vol/Pan block could use channels to select which side of it's input is being used. Also check out the 'Multi-Plexer' block, it also has the ability to select which row, and which side...
  10. Moke

    Import of Presets from III into FM9 causes tap delay times to be cut in half

    Any word on this? One of the many selling points of the newest generation of Fractal Audio modelers (FM3, FM9, Axe-Fx III, FC-6, FC-12) is the cross-platform compatibility. It seems that there are other issues too. Working with a client with an FM9, using my Axe-Fx III to load his preset, make...
  11. Moke

    Axe-Fx Firmware Release Version 17.01 Public Beta #2

    Would the addition of a 'Compander' help here? Loving it in the Delay blocks.
  12. Moke

    Suggested preset or amp settings for Vocal/Vowely PAF tone? I do have Austin Buddy LIVE GOLD preset pack....

    A lot of those vintage blues tones have a wonderful 'comb filtered' sound, maybe from using a mix of mics at different distances, close, room, back of an open back cab, etc... Try putting a 'Filter' block in front of the Amp, set to 'FF Comb'. 'Delay Time' around 4 ms (+/- 1) and 'Depth' to...
  13. Moke

    New album Tribulations done with Fractal gear!

    Really good stuff brother! All the way around. You should be very proud!
  14. Moke

    Is it me or the sound guy?

    They should be leaving a bit of headroom? make sure that you send them your hottest 'solo' preset/scene to make sure that you have as much room as possible when FOH is line checking you. I have all my 'Solo' scenes already a few dB louder, and with a little more mids to cut through the mix...
  15. Moke

    FracTool - ultimate multitool for FAS devices

    Yes, Shift+Right-click on the parameter to open options menu. You can select channel(s), and the range of presets
  16. Moke

    Samsung Galaxy 6S no longer can access the forum starting 2 days ago

    Well. not working again today?
  17. Moke

    FracTool - ultimate multitool for FAS devices

    In the mean time, have you tried the batch setter function in FM3-Edit?
  18. Moke

    2 separate signal paths

    A typical "Stereo" guitar signal chain has only one amp anyway. The 'Stereo' part happens after the (mono) 'pre' effects, Wah, Compressor, Drive(s), Modulation, and Amp/Cab. Stereo Chorus, Flanger, Delay(s), Reverb, etc... are all 'post' effects. You have two of most of those, so you should be...
  19. Moke

    Is it me or the sound guy?

    No amps at all, completely silent stage. Every thing was direct, even the electronic drums.
  20. Moke

    Is it me or the sound guy?

    All good points. At almost every gig, the singers girlfriend comes up at some point and says that the singer isn't loud enough. All channels are 'trimmed' to the same input levels. the singer's channel fader is a good 10+ dB above everything else. I see videos of shows all of the time, and he is...
  21. Moke

    Some help to get this Marshall rock punch (not metal chug)

    I just want to point out, that at that point, the guitars are double-tracked and hard panned. That is what makes that sound 'better' than the first section.
  22. Moke

    Is it me or the sound guy?

    We got so tired of this, and the monitors/side-fills not being what we had at sound check for House of Blues shows where we were the opening act... That we started using our mixer. Gave them three monitor sends to be routed to the three wedges in front. Our drummer uses headphones, so he already...
  23. Moke

    Vai Academy 6.0 - 2022, Las Vegas

    This would be so cool. And only about a 2-1/2 hour drive for me. But unfortunately, this kind of thing is just not financially possible for me. Looking forward to videos and pics from those that can attend. Hey Matt, need an assistant?;)
  24. Moke

    Samsung Galaxy 6S no longer can access the forum starting 2 days ago

    Hmmm. Working today? Sent from my LG phone.
  25. Moke

    The Fart Pedal

    Are you looking for a mic'd up fart sound, or the 'Fart in the Room' sound?
  26. Moke

    Samsung Galaxy 6S no longer can access the forum starting 2 days ago

    Chrome here. Chrome works on my Windows laptop and desktop
  27. Moke

    Volume Block Modifier Question

    Did you save just the Channel, or the entire block to your Library? Saved channels do not include modifiers. Saved blocks do. This started recently, with the ability to chose just the current channel or the entire block (all four channels) when saving blocks to the library. You have to read...
  28. Moke

    Only one pitch block...Very Disappointed

    Don't get me wrong. I would have loved it if the FM9 would have gotten 2 Pitch blocks, and let the end-user spend their available CPU as they see fit. But, we have to work with the tools that we've been given. You can sometimes get double-duty out of the Pitch block by using the Send and Return...
  29. Moke

    Only one pitch block...Very Disappointed

    The 'Plex-Delay' block (Plex Detune model) can be used as a 'Detune' effect.
  30. Moke

    Pitch block octave up?

    Which Model are you using? What exactly are you trying to do?
  31. Moke

    Pitch block octave up?

    It can do any 1/2 step shift up to 2 octaves. so yes, it can do 1 octave.
  32. Moke

    Pitch block octave up?

    It can go 2 octaves up.
  33. Moke

    Little Advice Before I Purchase a Soundcard

    I was just a bit too late.. LOL.. My approach is still valid, and is done in the preset, instead of globally. Both ways have their pros and cons.
  34. Moke

    Little Advice Before I Purchase a Soundcard

    If you plugged into only the Left jack of Input 4, that would make sense, as it is a stereo input. If so, put a Volume block just after the Input 4 block and set the 'Input Select' parameter to 'Left Only'.
  35. Moke

    Bug? can't save reverb, delay

    One possibility... Does the Save light go out after you save it? If you were editing the preset or a scene name, hitting the Save button only exits you from that naming process. The Save light will remain on. Hit Save again, and make sure that the light goes out to verify that it has saved.
  36. Moke

    Possible Bug

    'Layout Links' are tied to a specific switch, of a specific Layout only. Not a preset, or whatever happens to be assigned to that switch. I have them on all of the 'Preset' switches in my 'Preset' Layout to take me to my 'Scenes' Layout whenever any preset is selected.
  37. Moke

    I love my AX8 Dumble... why can't I get the FM3 to duplicate???

    I've done this for a few clients with great success. An Axe-Fx I Ultra to the Axe-Fx III, an AX8 to an FM3, etc... P.M. me if interested. Moke
  38. Moke

    Pitch shifting for the intro of Bringin' On A Heartbreak

    3 scenes, 3 pitch block channels, at least 1 custom global scale, 1 diatonic (3rds), and 1 diatonic (5ths). And some practice switching at the right time while playing.
  39. Moke

    Pitch shifting for the intro of Bringin' On A Heartbreak

    A diatonic scale won't really cover that. The harmony part is using a combination of 3rds, 4ths, 5ths, and one 6th.
  40. Moke

    FM3 Presets [Moke's Custom Presets] FM3 Master Thread - Firmware 3.xx/4.xx now available

    Updated 4 more 'Humbucker' versions of my "Artist' FM3 presets to firmware 4.01 'Cygnus'. All of them have had the Amp and Delay blocks reset, and are also compatible for 4.01. No need to perform the new 'Update All Presets' command in the Utilities menu with these. The 'Heaven and Hell'...
  41. Moke

    AFIII Presets [Moke's Custom Presets] Axe-Fx III Master Thread - Updated to Firmware 14/16 'Cygnus'! New 'Triple-Gain' (HB) Versions

    Updated 4 more 'Humbucker' versions of my "Artist' Axe-Fx III presets to firmware 16.05 'Cygnus'. Contact me to report any presets that have stopped working, or that sound really 'off'. I will try to get a few more done as soon as I can Moke's Heaven and Hell V2 (HB) 'Axe-Fx 3' (16.05) Moke's...
  42. Moke

    FM3 Presets [Moke's Custom Presets] FM3 Master Thread - Firmware 3.xx/4.xx now available

    While updating some of my 'Artist' Axe-Fx III presets to firmware 16.05 'Cygnus'. I made some minor changes to the FM3 versions to keep the two platforms as synced as possible. Moke's Crazy Biznitch 2.1 (HB) 'FM3' (4.01) Moke's Love Song V5.6 (HB) 'FM3' (4.01) Moke's Machinehead 2.1 (HB) 'FM3'...
  43. Moke

    AFIII Presets [Moke's Custom Presets] Axe-Fx III Master Thread - Updated to Firmware 14/16 'Cygnus'! New 'Triple-Gain' (HB) Versions

    Updated 4 more 'Humbucker' versions of my "Artist' Axe-Fx III presets to firmware 16.05 'Cygnus'. Contact me to report any presets that have stopped working, or that sound really 'off'. I will try to get a few more done as soon as I can Moke's Crazy Biznitch V2.1 (HB) 'Axe-Fx 3' (16.05) Moke's...
  44. Moke

    Axe-Fx III Mark II TURBO

    Any FM3, or FM9 Mark II TURBOS in the works?;)
  45. Moke

    Stand-in switches redefined for one preset only?

    A 'Stand-In' switch is when an 'external' switch is plugged into one of the 'Pedal' jacks and is remotely activating one of Switches of a particular Layout that has been designated for use as a 'Stand-In' switch. Is that what you are doing? What external switch are you using? How is it...
  46. Moke

    FM3 Presets [Moke's Custom Presets] FM3 Master Thread - Firmware 3.xx/4.xx now available

    While updating some of my 'Artist' Axe-Fx III presets to firmware 16.05 'Cygnus'. I made some minor changes to the FM3 versions to keep the two platforms as synced as possible. Moke's Carry on Wayward Son 2.2 (HB) 'FM3' (4.01) Moke's Sad But True V2.3 (HB) 'FM3' (4.01) Moke's Pour Some Sugar On...
  47. Moke

    AFIII Presets [Moke's Custom Presets] Axe-Fx III Master Thread - Updated to Firmware 14/16 'Cygnus'! New 'Triple-Gain' (HB) Versions

    I updated 5 more 'Humbucker' versions of my "Artist' Axe-Fx III presets to firmware 16.05 'Cygnus'. Contact me to report any presets that have stopped working, or that sound really 'off'. I will try to get a few more done as soon as I can Moke's Carry on Wayward Son V2.2 (HB) 'Axe-Fx 3'...
  48. Moke

    Stand-in switches redefined for one preset only?

    I am too. And also for the well written manual. Which is where I learned about 'Stand-in Switches'.
  49. Moke

    Wish Can we have a couple more VolPan instances per preset?

    You could use the 'Filter' block, and could likely mimic the different Vol/Pan curves in the Edit Modifier Window. And also tie the same controller to the 'Gain' and/or 'Frequency' parameter to alter the E.Q. a bit to make the transition smoother? Doesn't the '-80 dB' setting effectively mute...
  50. Moke

    Wish Can we have a couple more VolPan instances per preset?

    I could find uses for a couple more Vol/Pan blocks. But other blocks have gotten me what I needed, though probably not as elegant.
  51. Moke

    Stand-in switches redefined for one preset only?

    You should be able to use 'Per-Preset Overrides' on those switches, of that Layout.
  52. Moke

    Wish Can we have a couple more VolPan instances per preset?

    Filter blocks, set to Null are very low CPU. There are four of those too. But I'm sure that you know that already. If you are needing the ability to select the Right or Left input, the Mux block has that ability too. As well as the Drive and Amp blocks.
  53. Moke

    Wish Can we have a couple more VolPan instances per preset?

    Four isn't cutting it? What are you needing to do that the other options won't cover?
  54. Moke

    Health Update

    Bro! Oh man, so sorry. Time to kick cancer's ass!
  55. Moke

    AFIII Presets [Moke's Custom Presets] Axe-Fx III Master Thread - Updated to Firmware 14/16 'Cygnus'! New 'Triple-Gain' (HB) Versions

    It really varies? Mostly Amp block changes.. Some might need more 'Input Drive', less Treble/Presence, more mids, more bass, Bright switch turned Off (if On?), 'Input and Output EQ' tweaks. Compression tweaks (if used), etc... Different IR(s) in certain circumstances.
  56. Moke

    AFIII Presets [Moke's Custom Presets] Axe-Fx III Master Thread - Updated to Firmware 14/16 'Cygnus'! New 'Triple-Gain' (HB) Versions

    True.. Some Humbucker tones are tough to make sound correct using Single-Coils. But at least it is easier than the other way around! But I will do my best when I eventually get to this.
  57. Moke

    Stereo amp question?

    Post the preset.
  58. Moke

    FM3 Presets [Moke's Custom Presets] FM3 Master Thread - Firmware 3.xx/4.xx now available

    While updating some of my 'Artist' Axe-Fx III presets to firmware 16.05 'Cygnus'. I made some minor changes to the FM3 versions to keep the two platforms as synced as possible. Moke's Crazy Train 2.1 (HB) 'FM3' (4.01) Moke's Escape V2.7 (HB) 'FM3' (4.01) Moke's Eruption V2.7 (HB) 'FM3' (4.01)...
  59. Moke

    AFIII Presets [Moke's Custom Presets] Axe-Fx III Master Thread - Updated to Firmware 14/16 'Cygnus'! New 'Triple-Gain' (HB) Versions

    Okay, I updated 5 more 'Humbucker' versions of my "Artist' Axe-Fx III presets to firmware 16.05 'Cygnus'. Contact me to report any presets that have stopped working, or that sound really 'off'. I will try to get a few more done as soon as I can Moke's Any Way You Want It V2 (HB) 'Axe-Fx 3'...
  60. Moke

    FM3 Presets [Moke's Custom Presets] FM3 Master Thread - Firmware 3.xx/4.xx now available

    While updating some of my "General Multi-Purpose' Axe-Fx III presets to firmware 16.05 'Cygnus'. I made some minor changes to the Acoustic Sim signal chain and the 'Brit-800', and wanted to keep the FM3 versions synced. Moke's Acoustic Sim V5.6 (HB) 'FM3' (4.01) Moke's Acoustic+B3 sims V5.6...
  61. Moke

    AFIII Presets [Moke's Custom Presets] Axe-Fx III Master Thread - Updated to Firmware 14/16 'Cygnus'! New 'Triple-Gain' (HB) Versions

    Updated the 7 'Humbucker' versions of my "General Multi-Purpose' Axe-Fx III presets to firmware 16.05 'Cygnus'. Moke's Acoustic Sim V5.6 (HB) 'Axe-Fx 3' (16.05) Moke's Acoustic+B3 sims V5.6 (HB) 'Axe-Fx 3' (16.05) Moke's Acoustic+Shimmer V5.6 (HB) 'Axe-Fx 3' (16.05) Moke's Bass Sim V2.6 (HB)...
  62. Moke

    Fm3 for stereo synth+guitar? Inputs Q

    Doing both at the same time is possible. Using two Drive blocks, one set to only process it's Left input and it's output panned to the Left. The other set to only process it's Right input and it's output panned to the Right. (see pic below) Using separate presets would give you much more...
  63. Moke

    Ozzy Osbourne “I Don’t Know”

    Hey @bishop5150, what firmware are you running? I haven't updated that preset for 'Cygnus' yet. Doesn't sound like it needs much? It is in the next group of 'Artist' stuff.
  64. Moke

    Fm3 for stereo synth+guitar? Inputs Q

    The Drive blocks are mono. So it would take two to maintain your stereo synth path. CPU may be a problem in the FM3. Can you spell out exactly what you hope to use? I could load it all up and let you know if it will fit.
  65. Moke

    Coming from Axe Fx III, what would I really miss?

    I saw them both in there?:D
  66. Moke

    Can someone help explain this to me? Losing my mind again here.

    Ernie Ball-Music Man pickups are pretty hot. At least the one's that I have tried. My Axis guitars are similar in output as my EMG equipped guitar, But more tonally balanced to me. The EMGs have a lot of upper mids.
  67. Moke

    Can someone help explain this to me? Losing my mind again here.

    No. Adjust the Amp 'Level' to get the preset to be around the '0' line in the Output block meter for rhythm type tones. After recording, in this single channel example, you can turn up the channel fader on your DAW to get the DAW output just below the clipping point before exporting it...
  68. Moke

    Can someone help explain this to me? Losing my mind again here.

    Are you using the same Factory preset? Are you on the same firmware version? Are you using the newer Factory preset? Are you playing in a similar manner? Do you have any Global EQ changes on your unit?
  69. Moke

    RNDI between III and monitors?

    Tone Match that sucker and see what it's doing. Of course there is likely some nonlinear stull going on that the Tone Match can't account for?
  70. Moke

    Route OUT2 to Headphones?

    Maybe setup your grid with the Dry to out 2, the Wet to Out 3, and both to Out 1. Example..
  71. Moke

    2 Pitch Blocks

    I would have loved to have seen two Pitch blocks in the FM9 too!! There is a workaround using the 'Send' and 'Return' blocks to route a mono signal through a stereo Pitch block twice, with different shift amounts, etc... It has it's limits depending on what you need for the 'Harmonies'.
  72. Moke

    AFIII Presets [Moke's Custom Presets] Axe-Fx III Master Thread - Updated to Firmware 14/16 'Cygnus'! New 'Triple-Gain' (HB) Versions

    Okay, I just updated 7 more 'Humbucker' versions of my "Artist' Axe-Fx III presets to firmware 16.05 'Cygnus'. Contact me to report any presets that have stopped working, or that sound really 'off'. I will try to get a few more done as soon as I can Moke's Your Love V2.2 (HB) 'Axe-Fx 3'...
  73. Moke

    Leveling Presets and Output Level

    I typically use a post amp/cab, pre delay and reverb, 'Filter' block in my Solo scenes with a mid boost (1-3 dB at 450-1200 Hz?), some 'Low Cut' (100 Hz or higher) to keep the lows from clipping, and some extra 'High Cut' (8-10 KHz?) to reduce the extra 'hair' that the 'Drive' block may have...
  74. Moke

    AFIII Presets [Moke's Custom Presets] Axe-Fx III Master Thread - Updated to Firmware 14/16 'Cygnus'! New 'Triple-Gain' (HB) Versions

    I just updated 3 more 'Humbucker' versions of my "Artist' Axe-Fx III presets to firmware 16.05 'Cygnus'. Lots of controllers and multiple signal path stuff going on in these, so I only could get three done today. Contact me to report any presets that have stopped working, or that sound really...
  75. Moke

    FM3 Presets [Moke's Custom Presets] FM3 Master Thread - Firmware 3.xx/4.xx now available

    I noticed a couple of small mistakes in a couple of my FM3 presets while working on the Axe-Fx III 'Cygnus' versions. Fixed and added to the store, with a small increment in the file name to differentiate them from the earlier versions. Moke's Plush 2.2 (HB) 'FM3' (4.01) Moke's She Sells...
  76. Moke

    Talk box with Axe-Fx III

    This thread isn't really about me. Post in one of my 'Master' threads for the unit that you are using. I will help you there. Or PM me. Axe-Fx III FM3
  77. Moke

    Talk box with Axe-Fx III

    The Single-Coil 'Axe-Fx III' and 'FM3' "Cygnus" versions of that one were added a couple of days ago. Or are you wanting more 'Single-Coil' versions in general?
  78. Moke

    FM3 Presets [Moke's Custom Presets] FM3 Master Thread - Firmware 3.xx/4.xx now available

    I just updated 2 more 'Humbucker' versions of my "Artist' FM3 presets to firmware 4.01 (Cygnus). All of them have had the Amp and Delay blocks reset, and are also compatible for 4.01. No need to perform the new 'Update All Presets' command in the Utilities menu with these. Contact me to report...
  79. Moke

    AFIII Presets [Moke's Custom Presets] Axe-Fx III Master Thread - Updated to Firmware 14/16 'Cygnus'! New 'Triple-Gain' (HB) Versions

    I just updated 2 more 'Humbucker' versions of my "Artist' Axe-Fx III presets to firmware 16.05. Contact me to report any presets that have stopped working, or that sound really 'off'. I will try to get a few more done as soon as I can Moke's Rockin in the Free World 2.1 (HB) 'Axe-Fx 3'...
  80. Moke

    AFIII Presets [Moke's Custom Presets] Axe-Fx III Master Thread - Updated to Firmware 14/16 'Cygnus'! New 'Triple-Gain' (HB) Versions

    I had some requests to update some more Single-Coil versions. Only one left to redo. Updated 7 more of my 'Single-Coil' specific "Artist' Axe-Fx III presets to firmware 16.05 (Cygnus). Contact me to report any presets that have stopped working, or that sound really 'off'. I will try to get a...
  81. Moke

    Octave fuzz like Hendrix?

    Are you using the neck pickup on your Strat?
  82. Moke

    A definitive answer please. Pedal

    Many people modify their own pedals with switches, as there aren't really any low-cost expression pedals with switches.
  83. Moke

    FM3 Presets [Moke's Custom Presets] FM3 Master Thread - Firmware 3.xx/4.xx now available

    I had some requests to update some more Single-Coil versions. Only one left to redo. Updated 7 more of my 'Single-Coil' specific "Artist' FM3 presets to firmware 4.01. All of them have had the Amp and Delay blocks reset, and are also compatible for 4.01. No need to perform the new 'Update All...
  84. Moke

    How can I get the tone of my Axe Fx 2 preset with my new Axe Fx 3? Axe Fx 2 still sounds better :(

    I do just this kind of thing for a living. But I can't refuse a good challenge every now and then. This one is on the house..;):cool: Cabs in User Bank 1, Slots #48 and #49 (see pic below) Used a different model that was closer to my ear (ODS-100 Ford PAB). Tweaked the two Amps, and Cab block...
  85. Moke

    VOL block mutes itself on start up

    You can set each External Controller's 'Initial Value' in the 'Midi/Remote' menu. They are all set to 0% by default. You can also set your Volume modifier's 'PC-Reset' to 'ON', and save the preset with the volume at 100%.
  86. Moke

    AFIII Presets [Moke's Custom Presets] Axe-Fx III Master Thread - Updated to Firmware 14/16 'Cygnus'! New 'Triple-Gain' (HB) Versions

    That's a new one on me. Maybe it exceeds some file name length limit? Or the length of the entire path including the sub-directories? Any others have this problem?
  87. Moke

    AFIII Presets [Moke's Custom Presets] Axe-Fx III Master Thread - Updated to Firmware 14/16 'Cygnus'! New 'Triple-Gain' (HB) Versions

    Per a customer's request, I updated 7 more 'Humbucker' versions of my "Artist' Axe-Fx III presets to firmware 16.05. Contact me to report any presets that have stopped working, or that sound really 'off'. I will try to get a few more done as soon as I can Moke's Brothers in Arms V2 (HB)...
  88. Moke

    Help with Sabbath synth?

    Sounds doable. Might need it to stop in a few parts of the song via scenes. A synth block, a Trem/Pan block, and Filter block, for starters.
  89. Moke

    Increasing Volume Over Time with Sequencer

    Finally had a chance to temporarily update my Axe-Fx III to 16.05 and load this up. Like I stated in post #7, as well as other people in this thread, the ADSR seems to do what you were attempting. I also noticed some other issues, so I made some other edits listed below. Removed all of the...
  90. Moke

    Input number changeable by scene

    Cool. Not for shows. Just a thought to aid in working on the presets at home without having to modify the live presets.:cool:
  91. Moke

    Input number changeable by scene

    This little guy comes in handy for stuff like this...
  92. Moke

    Biggest struggle-dialing patches

    Are you putting the K10.2s on the ground? They (all speakers) will have more bass when on the floor. I have to cut out a lot of low-end out of my floor monitors at our mixer's monitor sends. The Xitone was designed to account for this. Try the K10.2s on poles, like you would do for FOH. Tweak...
  93. Moke

    AFIII Presets [Moke's Custom Presets] Axe-Fx III Master Thread - Updated to Firmware 14/16 'Cygnus'! New 'Triple-Gain' (HB) Versions

    Updated 6 of my 'Single-Coil' specific "Artist' Axe-Fx III presets to firmware 16.05. All of them have had the Amp and Delay blocks reset to take advantage of the latest advances. Contact me to report any presets that have stopped working, or that sound really 'off'. I will try to get a few...
  94. Moke

    FM3 Presets [Moke's Custom Presets] FM3 Master Thread - Firmware 3.xx/4.xx now available

    Updated 6 of my 'Single-Coil' specific "Artist' FM3 presets to firmware 4.01. All of them have had the Amp and Delay blocks reset, and are also compatible for 4.01. No need to perform the new 'Update All Presets' command in the Utilities menu with these. Contact me to report any presets that...
  95. Moke

    FM3 Presets [Moke's Custom Presets] FM3 Master Thread - Firmware 3.xx/4.xx now available

    Updated 6 more 'Humbucker' versions of my "Artist' FM3 presets to firmware 4.01. All of them have had the Amp and Delay blocks reset, and are also compatible for 4.01. No need to perform the new 'Update All Presets' command in the Utilities menu with these. I am starting with the ones that...
  96. Moke

    Dark sounding presets

    Many of the Factory presets may have been dialed in with a single coil guitar. In those cases, they will be dark when using a humbucker equipped guitar. You will have to tweak a bit for different guitars, some more than others, just like a real amp.
  97. Moke

    Missing "aggression" in high gain presets?

    As stated in the manual... Turn off the Cab modeling if you are running into a standard guitar cab, And turn off Power amp modeling if you are using a tube power amp.
  98. Moke

    FM3 Presets [Moke's Custom Presets] FM3 Master Thread - Firmware 3.xx/4.xx now available

    Updated 6 more 'Humbucker' versions of my "Artist' FM3 presets to firmware 4.01. All of them have had the Amp and Delay blocks reset, and are also compatible for 4.01. No need to perform the new 'Update All Presets' command in the Utilities menu with these. I am starting with the ones that...
  99. Moke

    New User

    1.. You can use a different channel of the Reverb block with a higher mix. You can copy channel A into channel B. Go to the new scenes. change the effect to channel B. Change any parameter to get what you need. 2.. Yes, you can setup the 'Hold' function on any 'Switch', of any 'View', in any...
Top Bottom