• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. frankiev

    OK to update from v1 to v12?

    Looks like fractal bot did the trick . Thanks to everyone for the help along the way
  2. frankiev

    OK to update from v1 to v12?

    why is it so hard to find this stuff when you need it ..lol . How do i install the new banks , axe edit or fractal bot and whats the procedure I found a bunch of old video and posts from 2013 but nothing current
  3. frankiev

    OK to update from v1 to v12?

    I installed the usb driver on my computer and when i connect the axe I get a pop up saying installing driver software that keeps on running and never installs . Any ideas ...win 7 64bit Nevermind ...took forever but installed ok
  4. frankiev

    OK to update from v1 to v12?

    That's my biggest concern . I'm jumping over 12 sets of release notes .Do I have read all of these and do each required tweak ?
  5. frankiev

    OK to update from v1 to v12?

    Thanks guys . I remember in times past when updating firmware on the axe 2 where you had too toggle the amp to something different and then back to reset it . That's not necessary anymore?
  6. frankiev

    OK to update from v1 to v12?

    I've owned an axe fx 3 since they first came out and i believe it shipped with v1.something. It's been sitting because I developed dermatitis on my fingertips and have been unable to play the guitar . My fingers are clearing up and I'm playing a bit again so I'd like to update to the current...
  7. frankiev

    Three Amp Blocks?

    Id rather see a big creative factory preset collection
  8. frankiev

    Anyway to download all presets from Preset Exchange at once

    Thanks .. Thats what I wound up doing . Open in new tab 10 at a time and download ea ...etc
  9. frankiev

    USB driver will not install on Windows 7

    I had the same issue on 64bit win 7 . Had to install service pack 1 to fix it
  10. frankiev

    Anyway to download all presets from Preset Exchange at once

    Im not partial to any particular style or sound . I like themall so Id like to try all the presets on the preset exchange but its a bit tedious to get them one by one . Is there a shortcut that would allow me to download them all at once ?
  11. frankiev

    Problem installing USB driver Win 7 64-bit

    Good to go after sp1 installed . Thanks !
  12. frankiev

    Problem installing USB driver Win 7 64-bit

    I see its not installed so Ill give it a try ...thanks
  13. frankiev

    Problem installing USB driver Win 7 64-bit

    I just installed 64bit win 7 on my Gateway laptop (8 years old ) so I could use Axe edit and Im getting an error message regarding hotfix kb3033929 when I try to install the fractal usb driver So I went to microsoft and downloaded the hotfix but it wont install . It says the update is not...
  14. frankiev

    Current State - Axe-Edit III

    So does this mean no 32bit version ????
  15. frankiev

    I'm looking for a list of factory cabs and their origin, ie Cab Pack # etc

    Anyone know if there is such a list ? I dont want to buy or load any that are already included . Not that there arent enough already ...lol
  16. frankiev

    700+ Naked Amps TonePack by AustinBuddy Available NOW!

    Ever thought of doing some effects packages .
  17. frankiev

    700+ Naked Amps TonePack by AustinBuddy Available NOW!

    Are you releasing one for the axefx 3 anytime soon. Very interested
  18. frankiev

    How to access the factory cabs ?

    Thanks guys . h.c.e hit it on the head
  19. frankiev

    How to access the factory cabs ?

    Cab Picker – With the cab number field selected, press ENTER to show the Cab Picker. This lists all IRs in the current bank and makes it easy to scroll through the list to find what you are looking for. UltraRes IRs are shown in violet. Non-UltraRes IRs are shown in green. Cabs are initially...
  20. frankiev

    How to access the factory cabs ?

    I tried that and enter does nothing . If i hit edit and it takes me to the chorus page options . Let me try to explain better I select a preset I navagate to the cab block and hit edit It takes me to the cab page where I see 4 rows cab1 cab2 cab3 cab4 with cab1 highlighted I hit edit and it...
  21. frankiev

    How to access the factory cabs ?

    Thanks for the reply . I must be a little slow today but when I select the grid view I of course see the cab block so I select edit and it shows 4 columns under cab 1 and hit edit it takes me to the cab page and I see 4 rows . In the first row I hit edit and it takes me to a chorus page ? So I...
  22. frankiev

    How to access the factory cabs ?

    No doubt a stupid question but how do you get to the factory cabs and how do you change them in the grid . I go to the layout then select cab and I see the 4 cab slots but when I try to change the cab in slot 1 I only see 2 options
  23. frankiev

    Axe-Fx III wait list: Let us know when you get notified...

    she who must be obeyed ....LOL
  24. frankiev

    Axe-Fx III wait list: Let us know when you get notified...

    2-12 is not looking so bad anymore !!!
  25. frankiev

    Sorry to hear about your surgery . Im in so fla and Im possibly interested in the III

    Sorry to hear about your surgery . Im in so fla and Im possibly interested in the III
  26. frankiev

    Axe-Fx III wait list: Let us know when you get notified...

    Ill bet most people signed up during the initial announcement ... Gives me hope that the list will eventually start moving faster once we get past the first week or so . ...2-12-18 around 8pm
  27. frankiev

    Axe-Fx III wait list: Let us know when you get notified...

    Looks like Im going to have to be patient 2/12 8:00
  28. frankiev

    Axe edit manual

    Thanks Chris ,very kind of you to do that . Id still like to have the pdf if anyone has a link
  29. frankiev

    Axe edit manual

    I havent played my guitar much in the last year or so and Im updating to all the latest software .Cant seem to find the axe edit manual and its not on the Fractal website . Can some post a link or advise where I can find a copy Cant remember how to load the new preset banks Thanks
  30. frankiev

    What happened to Clark Kents teaser thread ??

    And where are the IR's??
  31. frankiev

    Metallica tonematches/patches extravaganza v3.0! (FW15.03)

    How do you like the boomerang?Are you using it in the loop or ?
  32. frankiev

    Eventide h3000 se??

    Thanks for the input guys . Maybe Ill use the 900 to upgrade to an axe xl
  33. frankiev

    Eventide h3000 se??

    I came across an Eventide H3000 se (the grey one)for 850 and I see that on ebay an upgrade to H3500 specs (kitchen sink)upgrade is available for 100 . Of course Ive heard and read alot about this unit but Ive never seen or heard one live .Should I go for it? Is it worth the money or is my Axe 2...
  34. frankiev

    Updated to 15.2 now sounds thin

    thanks for the suggestions everyone . I should have time to check today or tmo
  35. frankiev

    Updated to 15.2 now sounds thin

    Same as always ,Mackie HR824's
  36. frankiev

    Updated to 15.2 now sounds thin

    Ill redo the install next chance I get .I did the "update all presets in the utility menu after installing the new presets
  37. frankiev

    Updated to 15.2 now sounds thin

    After updating it seems everything sounds very thin and a bit raspy . I think Ive read of this happening before when the software does not install properly .Should I just reinstall 15.2 again or is there a different way to go about it
  38. frankiev

    Need help with pitchshifter

    Got it . Thanks
  39. frankiev

    Need help with pitchshifter

    You make it sound easy! How is -3 semitones down a major sixth . I thought 9 semi tones was a major sisth
  40. frankiev

    Need help with pitchshifter

    Thanks everyone greatly appreciated
  41. frankiev

    Need help with pitchshifter

    Thanks
  42. frankiev

    Need help with pitchshifter

    Maybe its just me but I dont understand replies like this . Appreciate the advice
  43. frankiev

    Need help with pitchshifter

    I took a look at the manual . I guess the missing piece for me is how many semi tones in a 5th 8th 3rd etc . I also see that the axe will only do 2 0.voices in fixed harmony Still thinking about the eventide ,if just for the presets . What do you think? Is it worth the money (found one for 900)
  44. frankiev

    Need help with pitchshifter

    Thanks java . I will read the manual although I find it a bit confusing . For now Id like to just copy the ips 33b settings . for instance how do I copy the preset labeled 8-5-8 with regard to semitones .Im assuming 8 is an 8th and 5 is a fifth . How many semitones in a 5th? or an 8th. How do...
  45. frankiev

    Need help with pitchshifter

    Im completly at a loss regarding how to setup the pitch shifter. The settings on the axe make no sense to me due to my lack of knowledge. Im currently using a digitech ips 33b for chromatic harmonies . The settings on the 33b are tittled 1-3-5,8-5-8 etc . How do I translate these to the axe...
  46. frankiev

    Effects loop question

    Thanks guys . Saved me alot of stress trying to figure this out on my own Too bad the axe fx dosent come with 300 or so effects presets (especially harmonizer )then I wouldnt have to use external processors . Im no good at building my own as I think may be the case with many others
  47. frankiev

    Effects loop question

    I have several rack effects units that Id like to connect to the effects loop and I have a couple of questions . Whats the best way to set the levels ? Should I keep the output level of the external unit up loud and the fx input setting in the axe mixer down or is it a balanceing thing with...
  48. frankiev

    Axe-Fx II Firmware 15.00 Public Beta

    Appreciate the reply ,however my point is this . Any presets created or downloaded from axechange are non tranferable to v15 and such are no good and need to be redone . I appreciate greatly all the advances with the new firmware .I just wish there was a way to keep all the older presets
  49. frankiev

    Axe-Fx II Firmware 15.00 Public Beta

    " . It is recommended that any existing presets have the amp block reset to ensure that the appropriate parameter values are loaded. This is achieved by deselecting the amp type and then reselecting it, i.e. if the amp type is Deluxe Verb the amp block would be reset by selecting a different...
  50. frankiev

    fw15?

    thanks everyone
  51. frankiev

    fw15?

    I see some posts about fw15 .Ive search and cant find the download .What did I miss
  52. frankiev

    First Telecaster......

    I just picked up my first tele .Its a mim and has a duncan little 59 in the bridge .I have a jerry donahue pickup and some brss saddles that I bought in a pawn shop about a year ago (too good a deal to pass up) . Thinking about putting the JD in instead of the 59 and putting a duncan prails in...
  53. frankiev

    News of the MidyAX2 - Pilot the AXE-FX with MIDI controllers (X-Touch, BCR2000, Guitar Wing, ...)

    Wish I could help but this is way beyond me . I found a bcr2000 some time ago and Im looking forward to this . Thanks for all your hard work
  54. frankiev

    OwnHammer Studio Mix Libraries WAV Files Update

    Thanks . Why not stereo ?
  55. frankiev

    OwnHammer Studio Mix Libraries WAV Files Update

    This is probably a stupid question but which sample rate wave file should I use to convert to ultra res for the axe2
  56. frankiev

    As requested, some In Flames tonematches!

    Cant thank you enough for your work so far . Any chance of doing some brother cane ? Id be willing to pay for them if youd like
  57. frankiev

    Announcing Axe-Fx II XL

    +1
  58. frankiev

    Bare Knuckle Juggernauts

    Any more info?
  59. frankiev

    Looper purchase advise please

    Wow guys .. thanks ... Lots to consider !
  60. frankiev

    Looper purchase advise please

    Anyone have any experience with a Gibson echoplex digital pro ?
  61. frankiev

    Looper purchase advise please

    Thanks for all the advice . Ill go to GC and some out in person .
  62. frankiev

    Looper purchase advise please

    One of my main considerations is how the units affect the tone. Why bother with a great unit like the Axe only to have the looper detract from it .
  63. frankiev

    Looper purchase advise please

    Does it preserve the tone well? Do you use it in the loop of the Axe ?
  64. frankiev

    Looper purchase advise please

    Considering buying a dedicated looper . Im looking at the Boss RC300 and the Pigtronix infinity looper . Any input/advice/comments appreciated
  65. frankiev

    Bare Knuckle Juggernauts

    Have you had a chance to try them
  66. frankiev

    Bare Knuckle Juggernauts

    How would these be in an ESP custom shop horizon
  67. frankiev

    Anybody know what date Atomic is up to on CLR wait list?

    Im on the list as of June 12 . I sent Tom an inquiry
  68. frankiev

    Les Paul

    I was going to start a thread about this but maybe you guys can answer it for me . I came across a Yamaha SBG3000 in white . Its really a beautiful guitar although it weighs a ton . Does anyone know how this guitar might stack up to a Les Paul . ? I can probably pick it up for around 700 or so ...
  69. frankiev

    Cool.

    Thanks for bringing this to my attention.I want to experiment with tuning my guitar ,can anyone tell me what I need to use to retune to 432
  70. frankiev

    Bobs your uncle ?

    !!LOL
  71. frankiev

    Bobs your uncle ?

    Who exactly is Bob and why is he my Uncle?
  72. frankiev

    FW11 Clean System.syx?

    Thanks but I believe the clean.syx we're looking for cleans out the Axe of all previous software
  73. frankiev

    FW11 Clean System.syx?

    Im also interested in this . Does it have to be specific to v11 ? I remember seeing a clean.syx around somewhere . Anyone have a link ?
  74. frankiev

    Effects folder etc?

    Im still at work and havent installed 3.0 yet . Are the folders the same ? Most importantly the effects folder ,do I need to move it ? Cant wait to get home !!
  75. frankiev

    Vintage Dukane tube PA??

    Came across a Dukane PA .It has several inputs and bass and treble controls . Anyone familiar with this amp ? Is it somewhat flat ? It has 2 6l6 tubes but I believe its single ended and only about 30 watts or so .I can pick it up for 75$or so .
  76. frankiev

    Selling some amps and need advice

    Thinking about selling some amps and I could use some advice .What should I sell these amps for? Is the best way through ebay ? I have a Marshall 4 input 100watt superlead ,a Traynor bassmaster amp,a Traynor Bassmaster II amp , and a blackface Fender bassman head circuit aa864. All amps work...
  77. frankiev

    Any of you have this?

    No idea whats going on but you might want to research sacred geometry and see if any of the patterns you see are referenced
  78. frankiev

    ver 11b - 'Tallica Tone Matches

    I figured it out .Thanks
  79. frankiev

    ver 11b - 'Tallica Tone Matches

    Thanks !
  80. frankiev

    10.12 -> 11.00 sample

    11 sounds more juicy
  81. frankiev

    Post Your Rig!

    I used to have a Rane mixer/splitter I think it was an SM6
  82. frankiev

    Need some help setting up a filter w/ modifier

    Great .. thanks guys I will set up a preset this weekend
  83. frankiev

    Need some help setting up a filter w/ modifier

    Thanks Java..... Forgive my ignorance but Im not sure I understand how the volume of the picked note will control the filter edit..I just reread my original post and I didnt explain very well. I want to set up a filter so that frequency that will follow volume level not just be triggered by...
  84. frankiev

    Need some help setting up a filter w/ modifier

    Id like to set up a filter to sweep a limited range triggered by volume level . In other words striking a string triggers a certain frequency of the filter and as the note decays the frequency shifts a bit . Any help greatly appreciated
  85. frankiev

    Any way to download multiple presets at once?

    great idea Ill try it ... thanks
  86. frankiev

    Any way to download multiple presets at once?

    I havent been keeping up with axechange and would like to get the presets and ir's that are available . Dont get me wrong Im grateful to have this resource but what a pia to open and dowwnload each one (my fault forr not keeeping up with it)I doubt theres a way to download multiple presets at...
  87. frankiev

    Is there any way to erase a whole bank at once

    I like that idea ,It would also work for loading a template to all presets in a bank
  88. frankiev

    Is there any way to erase a whole bank at once

    Ill try it ..thanks
  89. frankiev

    Is there any way to erase a whole bank at once

    Would be great if I could do this all at once instead of one at a time
  90. frankiev

    Need help auditioning IR's and amps

    Thanks for the link Ill check it out
  91. frankiev

    Need help auditioning IR's and amps

    Great suggestions guys ...thanks
  92. frankiev

    Need help auditioning IR's and amps

    Forgive what are probably ignorant questions but Im nowhere near the experience level of 99% of you guys . I have tons of IR's OH RW etc... I could use some advice on auditioning them . Ive heard or mix ir and irlab but I have some questions . What amp do you guys use to audition the ir's? Is...
  93. frankiev

    Fremen presets - V 10.02

    looking forward to it
  94. frankiev

    Fremen presets - V 10.02

    Yes... Please pm me when you get the info
Top Bottom