• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. ecalcagnino

    How many users are using the Axe III as an Audio Interface?

    Yes, ESPECIALLY with all the new ins-and-outs. I have an RME I use when I need a couple mic pres. The III is perfect for my needs as an interface.
  2. ecalcagnino

    Wish Cab Mute and Solo buttons like a console

    I immediately found myself wishing for a quicker way to A/B my cabs when mixing. I think it would be really helpful if instead of the drop-down, there were two small buttons that take up the same width: (S) (M) Maybe rather than a grayed out/non-grayed out on/off designation, they could be...
  3. ecalcagnino

    Axe Edit III - Update

    The wait - it burns. :)
  4. ecalcagnino

    Axe Edit III - Update

    Super excited to give this a workout!
  5. ecalcagnino

    Will we have Axe Edit for the III once they come out later this month?

    Easier, yes for sure. But it's not ergonomic or reasonable to have it be on my desk and not in the rack where I need it to be. So sure, it's way easier, but that doesn't necessarily mean it's a great solution for everyone's specific situation.
  6. ecalcagnino

    Will we have Axe Edit for the III once they come out later this month?

    As much of a quantum (heh) leap as it is from the II, I am REALLY jonesing for the new Axe Edit. As someone else said, I have a ton of deeper edits for a lot of presets and I miss editing in the software way more than I expected. Looking forward to it, Cliff and crew!
  7. ecalcagnino

    BitDefender Antivirus Interferes with Axe-Fx III Driver Installation

    No issues with the driver here on my Win 10 system. Not running BitDefender.
  8. ecalcagnino

    Axe-Fx III wait list: Let us know when you get notified...

    Ordered today! Just in time for two weeks off between jobs, too. Nice! :) Waitlist confirmed Monday, January 29, 2018 at 7:35 AM Central Time
  9. ecalcagnino

    Axe-Fx III wait list: Let us know when you get notified...

    Whoops! Edited orig post. Central time.
  10. ecalcagnino

    Axe-Fx III wait list: Let us know when you get notified...

    I'm normally pretty laid back, but damn. I need that email! :) Waitlist confirmed Monday, January 29, 2018 at 7:35 AM Central Time
  11. ecalcagnino

    Cmon people, where the waitlist order thread lol

    January 29 • 7:34am CST
  12. ecalcagnino

    Free Mesa Preset Pack

    I'd love to see what you could do with the Herbie or Diezels, those would be great. They're really versatile and leave a lot of room for interpretation. Thanks, Leon!
  13. ecalcagnino

    OwnHammer V4 Impulse Response Libraries

    I use the QS as well for the most part. The JS and OH mixes are my mainstays.
  14. ecalcagnino

    Free Mesa Preset Pack

    You're the Mesa whisperer. Great stuff, thank you!
  15. ecalcagnino

    Bug? 7.02b - Choosing menu item Reset Block or Reset Current Effect Type activates inactive block

    7.02b - Choosing menu item Reset Block or Reset Current Effect Type activates inactive block, but the block still SHOWS that it's inactive. Can replicate every time. I tried this on a few different block types with the same results as well. I am using This is an XL with 7.02b and Axe Edit...
  16. ecalcagnino

    Great idea for used acoustic strings!

    Awesome!
  17. ecalcagnino

    FRFR Solutions

    I picked up an ASM-12 and have had to pull mids down to come close to my patches originally set up in the studio on Adam A7Xs with sub. It sounds great then, but I haven't played it out yet. My intention was to use it as backline and go direct to FOH. However, I'm not convinced that my patches...
  18. ecalcagnino

    VIDEO: From Van Halen I to 1984 and beyond....(PATCH INCLUDED)

    This preset is awesome, thank you!!
  19. ecalcagnino

    Please help - signal routing with AFX and Studio One for monitoring

    I got it, never mind. Thank you for your help!
  20. ecalcagnino

    Please help - signal routing with AFX and Studio One for monitoring

    Thanks Bakerman. So with this configuration will I be connecting my my monitors to output 2 then? Just a little fuzzy on this. Thanks!
  21. ecalcagnino

    AxeFxII XL: 'POP' on PC boot?

    I took the easy way out and bought a Furman M-8S power sequencer. You can set the timing and sequence of on/off signals to your gear to prevent issues like this. It's SUPER handy.
  22. ecalcagnino

    Please help - signal routing with AFX and Studio One for monitoring

    Thanks Chris. These are steps I have done and they really don't change my issue enough to keep me from seeking a different solution. I also understand that an external mixer would help, I am just thinking there has GOT to be a way to do this without adding external gear. You and I have...
  23. ecalcagnino

    Please help - signal routing with AFX and Studio One for monitoring

    Hey all. The answer to my issue is likely somewhere, but I haven't found it. That's probably due more to the fact that I am not 100% how to ask, so please bear with me. This is all using the AFX as the only interface connected to studio monitors at OUTPUT 1. I’m using Windows 10 with Studio One...
  24. ecalcagnino

    Twang/warmth/mids/sizzle/fuzz/hot virtual tubes! Some country-rock-stoner mid-gain. OH BOG

    You hit it on the head with that first part being Aerosmithy. Perry does a lot of countryish flourishes here and there. Great vibe!
  25. ecalcagnino

    What Have You Fellows Been Listening To Lately?

    Karnivool. Amazing band that I only came upon last year. Opeth. Ghost Reveries and Heritage albums. Tremonti. Love his playing.
  26. ecalcagnino

    Tonematched my Martin D18

    The fact that people are asking if it is actually the acoustic or not means great job!
  27. ecalcagnino

    Cab-Pack 10!

    !
  28. ecalcagnino

    Could someone with a 90's Ibanez RG offer a wee bit of help re: back plates?

    Thanks Luke and mr_fender. I'll give those a try as well.
  29. ecalcagnino

    Could someone with a 90's Ibanez RG offer a wee bit of help re: back plates?

    Thank guys. I'm in the Chicago/Milwaukee area.
  30. ecalcagnino

    Could someone with a 90's Ibanez RG offer a wee bit of help re: back plates?

    Hey there, I picked up an old J Custom model I have wanted for a long time. The problem is that the three plates in the back are all missing. I would like to get them replaced with new custom made aluminum ones, but my tracings are not very useable and won't yield a nice outcome. SO, I wanted...
  31. ecalcagnino

    Your D.A.W. of choice?

    Ditched Pro Tools 11 after 15 yrs with Digi/Avid and went to PreSonus Studio One 2. What a relief.
  32. ecalcagnino

    8 different V30's soundclip comparison! Ownhammer V3 Mix IR's!!

    I have to say, this sort of demo makes things SOOOOOO much easier to narrow down what I am after. As a player who never had access to so many different speaker/cab choices, it helps greatly to be able to hear things in this way so I can know what fits more with what I am looking for. I would go...
  33. ecalcagnino

    Officially Welcome OPETH

    One of my very favorite bands of all-time.
  34. ecalcagnino

    NGD - PRS Tremonti Sig in Angry Larry

    I'd really love a CU24 in this color. If anyone would be interested in a trade please let me know. I think I have decided to part with this beauty.
  35. ecalcagnino

    NGD - PRS Tremonti Sig in Angry Larry

    Thanks guys!
  36. ecalcagnino

    NGD - PRS Tremonti Sig in Angry Larry

    Hey there, I'm actually a little late with this one, but wanted to share. Angry Larry has to be one of the best colors PRS has ever offered. And I was told by the guys at PRS that it is no longer offered even on CS builds. Great guitar, not sure if I am down with the 22 frets, I have been a...
  37. ecalcagnino

    Axe-Edit 3.1 released!

    I would like to be in on a webinar as well. Thank you!
  38. ecalcagnino

    Need advice on 7 String guitar.

    If you can skip a trem I would strongly recommend the PRS SE 7 in that price range. With a a good setup it plays amazing. The combination of the 25" scale length and neck profile makes it one of the most playable 7s out there IMHO. It also responds very well to pickup swaps. The stock ones are...
  39. ecalcagnino

    Upcoming Axe-Fx II Streaming Class

    Definitely a few "oh, THAT'S a GREAT idea!" moments. Very well presented, too, which is a very difficult thing for more technical subjects like this. Thank you!
  40. ecalcagnino

    Slash illusion sound attempt FW15

    Phenomenal job!
  41. ecalcagnino

    AxeFXSend : A tiny tool for auditioning IRs or presets

    Thanks for this! Donation sent.
Top Bottom