• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. Y

    Significant Delay when switching patches

    It wasn't hooked up to the editor at the time. I will try and muck about with it more this weekend, and if I still have an issue will post a full report in the bug forum. Thanks for the responses!
  2. Y

    Significant Delay when switching patches

    Hi All, Proud new owner of an MFC Mark III. Hooking it up to my Ultra (v11) using MIDI. I can switch patches, but there are 2 notable issues: Lots of crackling/intermittent signal loss, like a if I had a bad audio cable Close to a 1 second delay when switching between presets Any...
  3. Y

    Call to arms: Where are all the Ultra/Std users?

    Ultra user here. What happened to all of the old Ultra patches that were available? There used to be hundreds, but now I only see 37 on the AxeChange. Is there an older version of that site with all of the old patches?
  4. Y

    Copy Output 1 to Output 2 - not always working?

    Thanks for the responses. Since this is only for practice (and my band mates refuse to understand anything about how FRFR works) I don't mind if the cab sim is applied to the signal going to the 4x12. It's purely for more volume and to have 4 12 inch speakers pushing air. Frankly speaking if I...
  5. Y

    Copy Output 1 to Output 2 - not always working?

    The presets not working are custom ones I did, so it's possible I have some borked up effects loop in there. Signal is going to power amp using output 2 (1/4''). I guess the question is, can I remedy this easily through the front panel? I won't have my laptop to do editing of the patches with...
  6. Y

    Copy Output 1 to Output 2 - not always working?

    Hi Gang, I'm playing around with using a power amp to drive a 4x12 (using the 1/4'' out put) while at the same time running my FRFR using the XLR out (this is mostly just for extra oomph during practice whre my single FRFR solution gets a little washed out). At any rate, some patches send...
  7. Y

    First Gig with AxeFx Ultra!

    Whoa just noticed you have a 475. I'm playing one of my two in that vid. Of all my guitars, including my Lynch owned ESP and my Adrian Smith Bloodline Jackson, they are my favorites. I seriously might get a third!
  8. Y

    First Gig with AxeFx Ultra!

    Yeah that buzzing was maddening. Had it coming through everyone's amps, even the bass player. Assuming it was some combo of tha lights and air conditioning.
  9. Y

    First Gig with AxeFx Ultra!

    So I had my first gig with the Ultra*. Running directly into a Yamaha DSR112 and also the front of the house board. Not the best video, but considering it was from a cheap digital camera, not too bad. The presets were very standard as I've not had time to dial in much. Used one of the CA3 amp...
  10. Y

    Yamaha DSR112P powered speaker

    Bit of an update; Took it to the band room the other day and started dialing in some very basic tones (amp->eq->cab). Needless to say, bandmates were VERY skeptical at first. "Sounds like shit" and "Why aren't you just using a real amp". Finally got a few good base tones dialed in after that...
  11. Y

    FCB1010

    Very glad to hear this. My FCB came today!!!
  12. Y

    Yamaha DSR112P powered speaker

    Wow. Got mine today and didn't have a tone of time to play with it, but at 1/3rd volume it was LOUD. And more importantly it sounded great. I cannot wait to dial in some patches with this. Unfortunately I doubt I'll have time to get everything up and running for my show next Saturday. Who...
  13. Y

    Carvin DCM series vs Carvin TS100 for axe fx 2

    I'm selling a TS100 that's in absolute mint condition. PM me if interested.
  14. Y

    FCB1010

    Another dumb question; I'm assuming basic functionality (expression pedals, simple bank and preset switching) works without the UNO chip, correct?
  15. Y

    Yamaha DSR112P powered speaker

    Im not what you would call an audiophile so take my eventual opinion with a large chuck of rock salt. ;) That being said I read a fair amount of reviews from DJ types and they seem to rate it pretty high. I'm hoping that it can produce some good volume.
  16. Y

    Cables - XLR or unbalanced?

    Thanks Yek - kinda what I was thinking. Saves me from getting another XLR cable too! :)
  17. Y

    Cables - XLR or unbalanced?

    So as a follow up to this, Im going to be running into a powered monitor (for stage volume) and a PA for FoH. Should I just mix the signals and go to both from output 1, or should I use out 2 to go to the monitor using 1/4 inch?
  18. Y

    Yamaha DSR112P powered speaker

    Should have 1 in 3-5 business days. Will def. let you know my thoughts. I won't have a lot to compare it to, as my only crack at FRFR has been through a small Fender Passport PA (and I must say even that sounded great despite having no speaker over 5.25).
  19. Y

    QCS12 vs. Mackie HD1221 vs. EV vs. Yamaha...

    Just an update - I ordered the Yamaha DSR112 (as well as a Behringer footboard to replace my bricked All Access). Will hopefully have in about a week and will let you guys know my thoughts.
  20. Y

    Hey there! New to the forums, with a couple of questions!

    Welcome aboard. I'm relatively new to the forums as well, but I think you'll find everyone here is super helpful. I'm now seriously leaning toward the EV's also. Seems like they are well thought of, and for the price of one QSC I can just about get 2 EV's. If you do end up getting one, I'll...
  21. Y

    FCB1010

    Thanks that a bit more clear!
  22. Y

    FCB1010

    So you just move the pedal a certain amount and it goes on? How do you turn it off?
  23. Y

    FCB1010

    Automatically? With the Behringer? Could you elaborate a bit?
  24. Y

    FCB1010

    So how do you turn on wah? Would you have to program it either as an added effect (like duplicate a patch and then add wah) or enable it as a button like any other effect? Basically, it sounds like to would have to press a button to get wah, which is what I was hoping to avoid. I wish I...
  25. Y

    FCB1010

    So a question for you Behringer FCB1010 owners; Does the expression pedal have a click-on button? I ask because on my Line 6 foot controller, I can have the Wah enabled for a preset but not active until I turn it on with the expression pedal itself. I'm wondering if a Behringer FCB1010 paired...
  26. Y

    QCS12 vs. Mackie HD1221 vs. EV vs. Yamaha...

    That is a touch pricey Merlin. Not completely out of the question, but I certainly wouldn't be getting 2 of them anytime soon. Seems like a lot of you are using 2, and that's what I was hoping to avoid, although I suppose it makes sense. Anyone have any thoughts on the Harbinger HP112? They...
  27. Y

    QCS12 vs. Mackie HD1221 vs. EV vs. Yamaha...

    So I'm leaning toward getting a powered monitor/speaker for my stage volume and practice. I'm a metal player (no drop tuning though). Which powered monitor would be right for me? I'm willing to take in all opinions and facts (volume, $, weight, etc). I supposed my #1 concern is being able to...
  28. Y

    Electro-Voice Live X 112P arrived today (unboxing inside!)

    So are you guys using the EV's using 2 or just 1? I play in 80's metal bands and am thinking about going this route and don't know if 1 is enough to compete with the rest of the band (in particular during practice).
  29. Y

    Rocktron All Access - Help Needed

    Good idea. I don't have a decent meter, but I just might have another 120AC->9VAC/2000mA adapter somewhere. Will at least save me a trip to the service place. Problem is neither Rocktron support nor the service center had any ideas beyond a possible power supply issue. Hopefully, I don't have...
  30. Y

    Rocktron All Access - Help Needed

    Fortunately there is a Rocktron authorized repair guy around. He's good too, so I might still get out of this w/o having to buy the offical fractal controller. Although, this might also be the excuse to get one. Then I'll have to get an atomic wedge... It never ends!!! ;)
  31. Y

    Rocktron All Access - Help Needed

    And it stopped working again. I think the unit needs servicing.
  32. Y

    Rocktron All Access - Help Needed

    OK - this is odd. All of the sudden, the display on the all access has started doing this odd "wave" thing, which incidentally I saw early today on youtube: YouTube - ‪Rocktron All Access Display Issue‬‏ Funny thing is now, the All Access is now able to switch channels. Very weird.
  33. Y

    Rocktron All Access - Help Needed

    Hi all, Is there anyone who can share the settings they are using with their All Access and Axe FX? I having trouble getting mine to work. For some reason, it wont switch channels. I see the Midi In light flash whenever I switch, but there is no other response from the Axe. I've tried...
  34. Y

    Is my ART SLA 2 damaged ?

    Is it OK if I hijack this thread a bit with an ART SLA2 related question? I'd just rather not flood the board with more ART related questions. My issue is this; I have it bridged mono running into my Line 6 4x12 cab @ 8 ohms mono. But it isn't at all as loud as I would have expected...
  35. Y

    Metal Patches for use with a QSC K12

    You should check out that Rust in Piece preset someone posted (I found it on that web page thats in a thread somehwere on page 4). That's the best preset I've found yet. Of course, I've only had the Axe-Fx for a week. ;)
  36. Y

    Firmware Version and Installing Downloaded Patches

    While searchin. I think I found the answer to question #2 (which appears to be a "yes"). Anyone have thoughts on #1?
  37. Y

    Firmware Version and Installing Downloaded Patches

    Hi Gang, I have firmware v11 installed on my Ultra. I'd like to install some of these killer patches you guys have made but have two questions: 1. Will the firmware verison of the AxeFX that was used to create the patch matter? For example, Can I copy/install a *.syx file from version 9.0...
  38. Y

    I'm Axe-less as of today

    My Ultra is being delivered today. So I'm Axe less, its hopefully only for a few more hours. sorry to rub it in! :)
  39. Y

    Advice on hooking up Axe FX, power amp, and cab.

    I tried a few sound checks using my Prophesy II, the ART, and the L6 cab. Was kind of all over the place in terms of sound and volume. I was expecting 560 watts RMS to be louder quite frankly. It did seems louder than my Carvin TS100 though. Every time I used that at rehearsal I had to crank it...
  40. Y

    Advice on hooking up Axe FX, power amp, and cab.

    Bah! Had a long response typed up and lost it. Short version; Thanks! :)
  41. Y

    In a rut and not getting anywhere

    Great responses all! Thanks!
  42. Y

    Rocktron All Access set-up Q

    Is there much functional difference between the two? They look quite similar.
  43. Y

    Advice on hooking up Axe FX, power amp, and cab.

    Hi gang, Proud new owner (well when it gets here on Tuesday) of an Ultra. In my basement, await an SKS rack case, power conditioner, an ART SLA 2, and a Line 6 Vetta 4x12 cab (stereo). To my knowledge the Vetta cab uses FV celestions with the idea being that the matching head was to do the cab...
  44. Y

    In a rut and not getting anywhere

    Thanks - I'll check it out. And yeah, anytime I get a new amp or toy, it makes me play lots more, but often I'll do the same tired stuff. What I'm hoping to do is get a more consistent practice routine too and play the way I play live (standing up, etc). A lot of times I'll sit down at home...
  45. Y

    In a rut and not getting anywhere

    So now that my Axe-FX is on the way, I can only blame my lousy playing on myself. :) That being said, I'm very much in a musical rut. I'm playing the same old pentatonic and minor scales and need to increase my knowledge of theory as well as improve my technique. I guess you could say I...
  46. Y

    Iron Maiden "Somewhere in time" album tone

    When I get one, I'll share it for sure, but I'm also not the best at doing EQ and what not.
  47. Y

    Iron Maiden "Somewhere in time" album tone

    Ha - I'm hoping to get an Ax-Fx soon and getting the SiT tone is my first priority. Regarding the GK's, I think they used the 250's on SiT and on SSoaSS they used the GK SEL2000/CPL2000. Great tone. I actually have a few of them lying around.
  48. Y

    Thinking about switching from Prophesy to AxeFX(amp/cab q's)

    True for the long run for sure, but if I do go FRFR, it means I most likely won't be able to use any of my current equipment (would like a one-piece FRFR amp/cab if I end up going that way).
  49. Y

    Thinking about switching from Prophesy to AxeFX(amp/cab q's)

    I actually just ran my Prophesy through my Fender Passport PA and I was surpised at the difference. While it isn't the highest quality or simplest way of going FRFR, it game me a far better understanding of the differences. Sh*t, this forum is gonna cost me a lot of money. :mrgreen:
  50. Y

    Thinking about switching from Prophesy to AxeFX(amp/cab q's)

    OK - regarding the FRFR stuff; Am I to understand that most of you don't mic your speakers live and go direct into the board via XLR? I'm making this assumption because it would seem that a speaker with tweeters, horn, crossover, etc would be difficult to mic. Am I way off here?
  51. Y

    Any owners in Buffalo/WNY Area?

    If so, would you be willing to show off your Axe FX to another local?
  52. Y

    Thinking about switching from Prophesy to AxeFX(amp/cab q's)

    Well I listed my Prophesy on Ebay and Craigslist so we'll see how that goes. ;) As far as the midi controller goes, I'm guessing I can still make use of my Rocktron All Access, no?
  53. Y

    Thinking about switching from Prophesy to AxeFX(amp/cab q's)

    So the Axe replaced the preamps and the effects units? Impressive...
  54. Y

    Thinking about switching from Prophesy to AxeFX(amp/cab q's)

    I'm getting that impression from a lot of the forum searches. What style of music do you play? I'm mostly hard rock/metal, and some of the RP presets are passable, but never quite what I'm looking for in terms of that searing lead sound. edit - and while we are in the cab forum, might I inquire...
  55. Y

    Thinking about switching from Prophesy to AxeFX(amp/cab q's)

    Hi Gang, I stumbled across the Axe FX when I was buying a GK 2100 SEL on ebay (can't wait to get that by the way!). I had never heard of the unit and was a little surprised by the amounts people were bidding. I did a little research and was pleasantly surprised at what I found. I've never...
Top Bottom