• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. B

    Is the FM3 user friendly?

    Hey guys- I owned an Axe FX II and didn’t bond with it. As much as I respect the level of tweak ability, it overwhelmed me and it seemed almost too easy to make it sound bad. I determined I was a straight forward amphead and bought a Suhr PT-15 to simplify my rig. I miss the options, but I...
  2. B

    FM3 or Line 6 HX Stomp as multi FX

    I'm looking to use the unit as a multi FX unit on my pedalboard, and as a direct to FOH backup solution with amp modeling. I'd make a different preset in the event that my amp blew a fuse, tube, or something. My amp does channel switch via relay. I wish the HX Stomp did this (the HX effects...
  3. B

    FM3 or Line 6 HX Stomp as multi FX

    I kind of think the HX stomp would be a better multi FX unit on a board with the modeling serving as an added bonus / backup solution if my rig went down. (since the PT15 is already a direct rig) While i have no doubt the FM3 is a better sounding unit, I wonder if the effects for Fractal are...
  4. B

    FM3 or Line 6 HX Stomp as multi FX

    Hey Fractal users! I run a big pedalboard and suhr pt15 IR. A traditional setup with direct to FOH. Recently, my power supplies died on me at a gig. ive had so many tube amps die that I always bring a backup amp. I was going to purchase an HX stomp for my board. It’d serve as a multiFX device...
  5. B

    Weird Ticking/Choppy Sound from one guitar thru Axe FX II - Video in Thread

    Anyone have any ideas? I'm using regular TRS cables into Yamaha studio monitors. Not sure, but would humbuster be something to look into?
  6. B

    Weird Ticking/Choppy Sound from one guitar thru Axe FX II - Video in Thread

    New update- it seems to be a proximity thing. When in front of my computer & monitor, i get the noise. It decreases in loudness as I move away. Weird!! Hope I can find a work around.
  7. B

    Weird Ticking/Choppy Sound from one guitar thru Axe FX II - Video in Thread

    My Axe FX II started acting weird the other day- it's never done this. I loaded up Bulb's latest rhythm/lead patch, which is fairly high gain, and was messing around. I'm getting this weird, ticking sound when I load up the patch. I figure Bulb wouldn't have dialed in the axe to sound like...
  8. B

    FW19- Axe FX II won't output sound

    Perfect! My bad for not looking around a bit more- saw that in the IO and was wondering if I'd need to change something. Mods can delete this if need be. Thanks again Webb.
  9. B

    FW19- Axe FX II won't output sound

    I updated to FW19 to use the newest version of Axe Edit and now I can't get any sound to output from my axe FX to my studio monitors, from my computer. Playing my guitar through the axe outputs to the studio monitors totally fine. 1. Cubase output is selected to FAS 2. Computer's audio playback...
  10. B

    What happened to Chris Katsukuri's Video's??

    Semi-related, but IMO Fractal Audio needs to put out tutorial videos themselves on many of the things Chris covered. I constantly find myself roaming youtube for helpful tutorials for operating other products, both software and hardware. When I bought my Axe FX II, I was surprised to see there...
  11. B

    Upcoming Axe-Fx II Streaming Class

    Watching the sample video- looks very informational! Do you get into talking about playing with the axe live? I've had decent success with tone dialing for recording volumes through studio monitors. When I tried to play out with my axe FX II, I had a lot of trouble. Fighting the fletcher munson...
  12. B

    Coming Soon

    I don't like the mission pedals myself, but JMO. The throw is super short, like a wah pedal. I have one for my wah needs, but for delay/volume i use the fv500
  13. B

    My expression pedals no longer work w MFC?

    Yep, likely pilot error. Still have had no luck. Yep, they are connected via TRS cables to the expression pedal inputs on MFC. MFC is working properly with regards to patch changes, etc. no idea why my configuration didn't change, yet they no longer work. I'm setting them up in axe edit, the...
  14. B

    My expression pedals no longer work w MFC?

    Hey guys- I hadn't used my Axe FX in a while and recently updated to FW 15. I fired up my MFC and wasn't getting any movement from my external controllers- I've got four. I tried using both Cat-5 & Faslink and neither remedy my problem. I went back and re-watched Chris' video on expression...
  15. B

    Line 6 G90 dropouts

    Exactly what i was planning on doing. Will report back tomorrow with results. I wonder how far they'll need to be away from eachother if this is the problem. I could place my EW300 stuff in our main rack w/ mixer, but sometimes on smaller stages, that isn't very much far away. In hindsight...
  16. B

    Line 6 G90 dropouts

    I need to test this- got a wedding tomorrow in which I plan on putting the G90 through it's paces to assess whether it's functional or not. But regarding being close to the rack- I'm usually about 10 ft from my rack, so that'd help maybe the closer dropouts. But what about the invetible...
  17. B

    Line 6 G90 dropouts

    Thanks for the replies, guys. The ohm caps don't matter as I'm not linking any antennas together. Chris, I'll try the test on the receivers. I'm scanning channels and selecting ones with the least RF. A guy on the line 6 forums thinks it's a problem with the ew300 transmitter and G90 receiver...
  18. B

    Line 6 G90 dropouts

    Hey guys- I bought a Line 6 G90 to put in my rack roughly about a year ago. The thing works, but will cut out if I move anywhere far away from it. Honestly for the first year, I really didn't find myself using it, but it was nice to have. I think it worked fine though, but I wish I would...
  19. B

    Eli Young Band

    Opened for these guys a while back. Neither was using the fractal, though the utility guy told me the other guy had a fractal. They showed up way late to sound check and were kind of divas, but had some great tone, playing, and the guitar players were nice.
  20. B

    Coming Soon

    I'm excited to see this come to life- I personally dont have that much interest in it, since I already have the axe 2/mfc rig, and my traditional pedalboard which serves me quite well. The product is intriguing though, and fills a big niche in the market. I'm hoping to see a few updates come...
  21. B

    Having to really crank my gt1000fx and axe to get any volume...:/

    I'll have to check- I actually don't think the lights are going off. I'm running the poweramp in parallel mode, and my NL212 in mono. Coming out via a speakon cable. The knob on the matrix just isn't very smooth for volume output- maybe this is by design but I get like nothing from 0-5 in terms...
  22. B

    Having to really crank my gt1000fx and axe to get any volume...:/

    Hey guys- I've gigged my axe a fair bit, but am running a gt1000fx into a matrix nl212. Getting enough stage volume had been a problem in certain rooms. I'm talking cranking the matrix to almost 2 or 3 o'clock (only goes to about 5 o clock) Ditto for the axe. I don't think I was hitting...
  23. B

    Axe-Fx II Firmware 15.00 Public Beta

    Maybe it's just my guitars, or cabs, but I've never been able to dial in the Friedman for blues very well. I'm usually ABing between it and a clean amp, like the Twin, Shiver Clean, and when I switch to the Friedman, it's a little nasally, yet lacks a certain crisp-ness that the clean patches...
  24. B

    Axe-Fx II Firmware 15.00 Public Beta

    I'm in Kansas City- Would love you guys to make it out here to give me some Axe pointers, ahah : )
  25. B

    Axe-Fx II Firmware 15.00 Public Beta

    Ah, ppreciate it.
  26. B

    Axe-Fx II Firmware 15.00 Public Beta

    Sweet! What are some of the changes we should be on the lookout for? (sorry if you've already gone over this somewhere else)
  27. B

    You guys will be proud! Gigged my Axe and had good results : )

    Yeah, again I've cranked my patches but I gig often So I really don't get much of a chance to set up my axe rig at home. the only reason I'm using it right now is because my deluxe is getting fixed haha My axe rig has always had this nasally quality to it I've never been able to get rid of...
  28. B

    You guys will be proud! Gigged my Axe and had good results : )

    I'm just running my pedals into the axe at the moment. I know the axe may react differently to pedals than a real tube amp, but I'm just not even in the ballpark with a proper tone fitting into the mix. The lows and highs are out of control, so I slammed down on them, and now I have ended up...
  29. B

    You guys will be proud! Gigged my Axe and had good results : )

    The celebration was short lived, unfortunately. Tone sound good in that particular room, but the last three gigs haven't been as satisfactory. IMO the matrix cab really doesn't sound good. What I've been getting is a really thin, mid heavy tone. I'm rolling off lows and highs with both a peq...
  30. B

    You guys will be proud! Gigged my Axe and had good results : )

    You guys will be proud! Gigged my Axe and had good results. Edit...kind of Hey guys! As many of us know, I've had a hard time with my Axe FX II. I first bought it with a Matrix Q12a, and struggled with the FRFR switch. I then saved money and bought the MFC + expression pedals- wanted the axe...
  31. B

    Favorite Drive Blocks

    Sounds quite good! I'll have to check out the buttery amp sim plus the BB. What are you running the hi-cut/low-cut at, and the tone/drive?
  32. B

    Favorite Drive Blocks

    I find the BB too dark as well. I usually gravitate towards the Fet boost & Zen Drive because they are more transparent. Haven't had much success with the axe using the RCB and ACB drives, despite enjoying their real counterparts. Still a work in progress figuring out how to use drive pedals in...
  33. B

    Testament Electric Crown solo (mix) - "Marshall JMP-1" (v14.02)

    Very impressive! I know I sound like a critic, but I'd be even more impressed if you did it all in one take!
  34. B

    Dweezil's Eruption and Somebody Get Me A Doctor

    I don't think a board recording has anything to do with it...an overly bright/thin tone. I've taken captures of my mic'd guitar amps in a live setting like so and been both successful and unsuccessful. Ultimately it was on me and my tone crafting
  35. B

    For those who have tried both... Shure PSM 900 or Sennheiser EW 300 G3?

    I've got the ew300 and it's rock solid. Idk if its worth the cash but it works great
  36. B

    Cliff, you orta solicit this fellar...

    Absolutely incredible tones- a great reference point. Wonder if I could achieve some of this via the axe. Thanks for the ref!
  37. B

    Trouble with the BB Preamp Drive block

    Definitely something I could consider. I'm in touch with Thomas Hawk, another user here who lives in KC. We're going to get together next week, so I'll be able to do a side by side comparison of the Axe FX II's, and go from there. Thanks for the replies guys! I used to have a BB+ WAY long...
  38. B

    WICKED WIKI 17: Settings for Different Guitars

    Isn't there noticeable lag though when switching between presets. Amp X/Y and using multiple presets both give me a noticeable gap. Maybe I'm being too sensative, but my musicomlab has no lag...then again it's analog but I can't stand the half a second lause
  39. B

    FASLINK™ Adapters are here!

    Yeah, I think FASlink is a great idea. And I know Fractal is a small company. But $50 for the unit plus $17.40 shipping to Kansas is pretty high IMO. For that price, I could probably buy two Ethercon cables, and not have the whole adapter/weak point thing. I waited to buy a MKIII for the...
  40. B

    Steep Learning Curve!

    I was thinking about it last night and I just think the fact that the Axe gives you such incredible freedom and flexibility can make it tough. With 20 pathways comes some incredible unexplored territory, but a lot of things that just don't flat out work. Learning how to navigate to more...
  41. B

    Trouble with the BB Preamp Drive block

    Do you guys have any tips for the BB preamp? What are you running it into? I use my real one a lot like this: https://www.youtube.com/watch?v=i51O4z2uP4o Pretty transparent, just a next step up in gain. The BB in the axe isn't very transparent to my ears- really darkens and clogs up the...
  42. B

    Steep Learning Curve!

    The Double Verb is for sure my favorite amp model that I've tried. A lot of the Marshall style tones have gotten a bit nasally/mid-heavy for my liking, compared to my real marshalls. The Double Verb sounds WAY better than the Deluxe Verb model, and immensely fatter than my actual deluxe reverb...
  43. B

    FAS Link shipping abuse

    Honestly though, it says it's gonna cost me $17.03 to ship a $50.00 piece of gear to my house in Kansas City... I could understand the Axe of MFC, but the Faslink Adapter is nowhere near the size/weight of the aforementioned products. Is this some sort of error, or does ground shipping cost that...
  44. B

    Steep Learning Curve!

    The learning curve is indeed VERY steep. I hope to one day reap the benefits, but dialing in your tone is a tedious process and I've yet to find much I like. But the upside is there.
  45. B

    Hating my Axe FX, any last words before I sell?

    Do you roll off any super lows in the global EQ? My main problem has been thin-ness, too much thin-nes and mids. When I crank the bass though, I get boomy and not full.
  46. B

    Hating my Axe FX, any last words before I sell?

    If I'm using an Axe FX with a poweramp/cabinet, shouldn't I be able to compare it side by side to an amp in the room? Honest question- I bought the poweramp/cab to get an amp in the room feel, and it made sense to me to AB two amps, since I effectively turned the axe into one. (i think..)
  47. B

    Hating my Axe FX, any last words before I sell?

    I did that initially- still have my Q12a from Matrix. Highs were brittle and there wasn't fullness- almost like the NL212 debacle but on a larger scale. Maybe my Matrix products suck? I've always seen so many users with them + the axe so I never really questioned their stuff- seemed a lot like...
  48. B

    Hating my Axe FX, any last words before I sell?

    Meh, yeah this forum's been very patient and helpful with me- I apologize for the 3 or so threads I've started that left me frustrated. When you spend this much $$ on a device and keep investing, it can get frustrating. Still, that's no reason for me to take it out on other forum members (if I...
  49. B

    Hating my Axe FX, any last words before I sell?

    I've only gigged the rig 4 times. two times, I used output 1 with cab emulation to FOH output 2 to my Q12a, so I did FRFR exclusively. I hated that, so the last 2 I've just miced up my NL212 in mono because i didn't want to mess with IR's for FOH. This obviously sounded terrible, given my...
  50. B

    Hating my Axe FX, any last words before I sell?

    It's not FRFR, and roadrunner is like the first person I've read about using cab sims on that sounds good
  51. B

    Hating my Axe FX, any last words before I sell?

    I also bought the Axe because i played a few outdoor gigs with my open back fender and it sounded way differently. Sometimes I play small gigs, sometimes bigger ones, and I wanted something that would be consistent in gain structure night in and night out, no matter what I set the volume at.
  52. B

    Hating my Axe FX, any last words before I sell?

    4 pages in and I've only responded one time because I started the thread last night....I only have a limited amount of time to test my rig at high volumes when my roommate happens to be gone. (he works from home and never leaves). Furthermore, I only have a limited amount of time to check this...
  53. B

    Hating my Axe FX, any last words before I sell?

    I'll try running it with cab sims on again- I've tried before and everything seemed kind of 'squishy' and I don't want to say this word, but digital sounding. Maybe I should have just bought a normal cab. A lot of my complaints are moreso in the actual response of the amp, & overall dynamics...
  54. B

    Hating my Axe FX, any last words before I sell?

    I play very actively in Kansas City and don't know any other musicians using an Axe FX II....never seen anyone use one around here. I AB'd pretty cleverly- scene 1 was my Axe chain into a disengaged volume block. Scene 2 was the signal into an FX loop block and volume block set to -80 db. I bet...
  55. B

    Hating my Axe FX, any last words before I sell?

    I've posted like 5 threads on how I've struggled with my Axe FX II. Have gotten some sort of helpful responses, but not very many applied to basic rock/blues tones- most were lead/metal/sustain stuff. The Problem The Axe FX II is so easy to make sound bad, it's unreal. I started my journey...
  56. B

    FASLINK Adapters? (XLR to Ethercon)

    how much will they cost?
  57. B

    Coming Soon

    Very cool! Already have 3 FV500L's though, but curious how the sweep is vs. other pedals! Business-wise, great idea from Fractal to release these though- buy an MFC and some pedals and be ready to go. Now, some monetary switches for the MFC would be the next thing too!
  58. B

    FASLINK Adapters? (XLR to Ethercon)

    How much will they cost?
  59. B

    FASLINK Adapters? (XLR to Ethercon)

    how much will they cost?
  60. B

    does the Ax smoke a pod hd?

    How do you guys like the HD500 as a backup rig? It's an all in one solution, but maybe there's a better pod or some other type of floor solution? In case my axe or amp rig ever crap out, I want to have something I can bring along to gigs just in case. Been thinking about the HD500 for a while
  61. B

    Do you use scenes and boost amps with pedals for gain staging?

    Hey guys- I currently run a traditional rig that's quite versatile, and I'm having trouble getting my axe up copy it. My deluxe verb is set to the edge of breakup. For my light gain, I hit it with 1. Bogner blue 2. Medium crunch is a suhr koko in front of the bog blue 3. I boost #2...
  62. B

    How do I run my Axe with an NL212 in MONO?

    Thanks for the replies guys- I'll have the chance to revisit this conundrum over my lunch break. As for sending to different things...the Q12a is active and does not need a powrtamp. I want the gt1000fx to run mono for just the cab out of output 2, and I'll send out 1 to the q12a straight from...
  63. B

    How do I run my Axe with an NL212 in MONO?

    I'm 90 percent sure something is wrong with my Matrix GT1000fx, because of this: Axe output 1 with cab emulation set up, and outputs to my studio monitors in stereo. Axe output 2 with no cab emulation (just to test it) set up to output to my Q12a. So I AM getting signal to my Q12a with no cab...
  64. B

    How do I run my Axe with an NL212 in MONO?

    Input B is on the left side. I'm following the exact configuration matrix lists in their official setup video: https://www.youtube.com/watch?v=Z9C1GyyKjbo They run axe out into the left most input of the matrix. Then use the leftmost output of the matrix to send to the cab. That's exactly...
  65. B

    How do I run my Axe with an NL212 in MONO?

    The amp works when set to the stereo configuration, but when set to parallel (mono) it doesn't. Maybe I got sold a faulty amp...
  66. B

    How do I run my Axe with an NL212 in MONO?

    This is STILL not working. The Gt1000fx with Axe works fine in stereo, but will not work in mono. I have set everything up according to matrix's videos- NL212 set to mono, using left in. Axe out 2 left into matrix in B. Matrix out B into NL212 mono in. Axe is switched to be run as Copy L -> R...
  67. B

    So, V14...

    So will the looper be able to sync with a midi clock?
  68. B

    Yek's Presets for MkI/MkII (v15.03) and Blog

    Hey Yek- can you explain about having the cab block as the last in the chain (with the split to the FX loop). Most patches I see have an amp, cab, then time based stuff after the cab. Do you have any problems with putting verb/delay before the cab. I get why you do it, but did you ever go...
  69. B

    XA-1/XA-2 FASLINK to CAT5/Ethernet/Ethercon availability?

    When will this available? I've held off buying an ethercon cable because I wanted to just use existing XLR's and be done with it...
  70. B

    MFC MKII Freeze at Gig

    I had the same issue at a gig the other week with my MKIII. Never had it freeze at home, but it froze and I had to unplug and re-plug in the ethernet cable. Kinda worrisome as I have barely gigged it. Like yours, expression & sound worked, but the buttons wouldn't do anything.
  71. B

    BB Preamp?

    How are you guys dialing in the BB? I've yet to get it to sound good...never transparent enough for me. Lot of gain, but doesn't sound that close to my real BB
  72. B

    How do I run my Axe with an NL212 in MONO?

    Thanks for the reply- a lot of the questions you asked are in the OP. I have an FX L block in the chain- the signal splits to an FXL and a cab block at the end. I thought that because of that, the signal with no cab emulation would go to output 2. But yeah, I ran it in stereo and mono at my...
  73. B

    How do I run my Axe with an NL212 in MONO?

    Hey guys- Tried gigging my axe, matrix gt1000fx and new nl212 last night at a small duo gig. It went okay, except for some reason, Icouldn't get any sound to come out of the cab in mono. My end plan is likely to run to FOH in mono and to my NL212 in stereo. Til I get that all worked out, I'm...
  74. B

    Using 2 Matrix NL212s Live

    Got mine today- so far seems pretty cool in the bedroom. I love the amp in the room thing... i am so happy to have it back! Will be gigging tonight, but not full band, so we'll see how it goes.
  75. B

    Using 2 Matrix NL212s Live

    very cool! I just ordered an NL212 and it's coming in an hour or two. Will post my thoughts- running a GT1000FX
  76. B

    Cabling Question - Out of Axe II output into Matrix Input

    Cool, that's what I thought. Cheers! Ben
  77. B

    Cabling Question - Out of Axe II output into Matrix Input

    Hey guys- I'm ordering cables for my NL212 when it arrives, and I grabbed two speakon cables to go out of the matrix into the NL212. What do I need to go from Axe's output 2 into the matrix's in? I mean what kind of cables are the best solution? 2x 1/4 TRS to XLR? Or TS to TS? Or TRS to...
  78. B

    The New Bright Knob

    I have the same question. and where is the bright knob?
  79. B

    I constantly feel like I'm guessing with my Axe FX II

    The axe is still giving me headaches - my issue with the unit is - IMO it's just really really easy to make the unit sound bad. Effects included. Dialing in my Strymon timeline took about two seconds to get a lush, warm sounding delay. Turning my fender twin up with everything set on 5...
  80. B

    Using 2 Matrix NL212s Live

    Cool, thanks for the replies. Let me know how the setup ends up working out, but I'm thinking about going with an NL212 vs the Port City OS. Haven't really seen many negative reviews about the NL212, albeit, there haven't been a ton of reviews in general.
  81. B

    Using 2 Matrix NL212s Live

    Sound good in stereo? How does the NL212 compare to the Mesa and Port City (and what cab did you have in the port city?) if the port city sounds fuller, i could handle the extra weight. but if they're close, then I could go with the NL212, as they are priced pretty similarly. Thanks for your...
  82. B

    Using 2 Matrix NL212s Live

    Very awesome!! How do you like them vs. other cabs with what speakers? Are you running direct to FOH as well, or micing up the NL 212's? Sorry for the barrage of questions, just curious. Are you going stereo into the NL212's? Thinking about an NL212 or a port city with a scumback/V30 combo.
  83. B

    Using 2 Matrix NL212s Live

    Very awesome!! How do you like them vs. other cabs with what speakers? Are you running direct to FOH as well, or micing up the NL 212's? Sorry for the barrage of questions, just curious. Are you going stereo into the NL212's? Thinking about an NL212 or a port city with a scumback/V30 combo.
  84. B

    NL212 vs Port City 2x12 OS

    Yek, how do you like your port city OS and what speakers do you have in it? Do you find the color of those speakers limits your axe's versatility? I know you've got the vertical one
  85. B

    NL212 vs Port City 2x12 OS

    still extremely torn on this issue- Matrix might be more versatile but I wonder about sending a feed to FOH with the matrix...bceause there is no IR of it, not sure what I'd use. Just don't know what I want! I'm thinking either scumbacks or V30's in the port city if I get one. Maybe one of...
  86. B

    NL212 vs Port City 2x12 OS

    I guess...eventually I'd like to go Cab sims to foh. ATM though I haven't been able to gig my axe with any success bc me and FRFR haven't bonded
  87. B

    Live rig with CLR's

    Guitar cab behind you! Wedges up front for you
  88. B

    NL212 vs Port City 2x12 OS

    Thinking about a port city with an alnico and greenback, or a matrix NL212. The power amp is a gt1000fx. Looking for country to rock lead tones. I hear GREAT things about the NL212, too good to be true?
  89. B

    What Guitar Cab do you guys like with the Axe FX II?

    what do you guys think is the most versatile guitar speaker? Marshall & vox sounds are my priorities
  90. B

    What Guitar Cab do you guys like with the Axe FX II?

    Good to know. There's a port city os 2x12 in the emporium, but I've always preferred V30's and it has G12k's. For $600, I want to get a cab with the speakers I'd like.
  91. B

    What Guitar Cab do you guys like with the Axe FX II?

    Yeah, my first inclination was to get a cab with v30's, like a used mesa cab (theres a 2x12 w v30's locally for $350). But as I mentioned, I play a lot of rock, country, and blues...I do tend to favor marshall sounds in my axe, but I need something that give me lower and higher gain.
  92. B

    What Guitar Cab do you guys like with the Axe FX II?

    Do you find it limits your axes versatility? Of course I plan on still going cab sims to foh, but like I said, I worry that playing a vox patch through a cab with v30s will sound dumb. Idk But if I do go port city, what speakers do you guys recommend? I play rock, country, blues, funk...
  93. B

    What Guitar Cab do you guys like with the Axe FX II?

    Hey guys- I've got a Matrix Q12a FRFR solution and have been thinking about going down the road of poweramp + cab. What cab do you guys use? I'm probably looking for a 1x12 or 2x12 just to provide some on stage volume when I need it, and of course, the axe is versatile that I could run it...
  94. B

    Suhr Classic T - Divided by 13

    totally dug it!! whered you get the suhr? been looking for a classic t very much like that
  95. B

    What's the quickest way to audition different cabinets?

    Hearing how drastic the difference is between cabinet IR's on the axe/modeling in general is pretty staggering. I want to find an efficient way to switch between cabs/try a lot of cabs, but the way I'm working is REALLY cumbersome, given the shear number of cabinets? Is there a way to...
  96. B

    Axe-Fx II Firmware Version 12.04 Public Beta

    What cab IR's do you like with the Shiver, Rosh? Or are you using a cab + Poweramp?
  97. B

    Axe-Fx II Firmware Version 12.04 Public Beta

    Good to know. Wish I had a 5 space rack though >:[ .... Axe, G90, Senn EW300, and now I feel like I could use a GT1000 or 800....dang
  98. B

    Axe-Fx II Firmware Version 12.04 Public Beta

    Great news about the bass development- I'm a guitar player but am thinking about getting a bass to pick up gigs. Could I use a matrix GT1000 FX for a bass cabinet as well as a guitar one? That'd be pretty cool, as IDK if FRFR would be the way to go for bass
  99. B

    Axe-Fx II Firmware Version 12.04 Public Beta

    It's a valid point though....there's A LOT more to learn with the axe. More you could potentially do with it, but much more to understand, IMO.
  100. B

    Going to try FRFR again at a gig, but why is everything sounding so harsh?

    Ps, it would be an awesome feature to have two or more global EQ settings. I guess I could use a GEQ Block per patch and make it global
Top Bottom