• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. Mornna84

    [not a bug] HELP! Axe FX2 Mark2 freezes when changing preset

    The problem was I could'nt write over it! Using the preset manager in Axe Edit, every time I cleared preset 01, the axe fx was freezing upon clicking on save... Finally I managed to clear it by saving another preset to preset 01, no idea why this way worked versus directly clearing preset 01...
  2. Mornna84

    [not a bug] HELP! Axe FX2 Mark2 freezes when changing preset

    My Axe Fx 2 Mark2 was working perfectly fine for 4 years. But suddenly a major bug appears. When switching on, everything is normal, the axe fx displaying the quantum logo for a second, then going to the first preset #00. But then, as soon as I want to switch to preset #01, the axe fx totally...
  3. Mornna84

    Bug? Driver install problem

    Do you think it may have anything to do with either Axe Edit or Fractal-Bot? I have never uninstalled these before trying to install the latest driver...
  4. Mornna84

    Bug? Driver install problem

    So finally... back to initial situation. What I understood for driver v.16.8 was not valid for driver 2014.06.06. When re-installing driver 16.8, at the step prompting me to switch the axe on, I had to wait about 5min for the windows driver install to finish before clicking next to finalize the...
  5. Mornna84

    Bug? Driver install problem

    Yes, that's what I did every single time, but maybe.. maybe I nailed it. Now it worked again with the old driver, but it was not a matter of cleaning, it was a matter of timing! I still gotta try with the newest driver but here's what I did: When starting the driver setup, go until it prompts...
  6. Mornna84

    Bug? Driver install problem

    did it 5-6 times now with cleaning / unplugging every time. Still stuck with error code 100. I guess something must still be left messing with any new install...
  7. Mornna84

    Bug? Driver install problem

    HELP!!! I am now turning crazy! After following the steps described in the link above, now I also get error code 100 when trying to install the old driver 1.68!!! Can't find any way to re-connect my Axe Fx2 Mk2 to the computer!!
  8. Mornna84

    Bug? Driver install problem

    BTW, installing the old driver doesn't seem to require unplugging the axe at all, switching it off is sufficient (?).
  9. Mornna84

    Bug? Driver install problem

    Thanx, I followed your instructions step by step exactly as you wrote them. The FAS setup window: "error code 100", but... The windows device driver install window: "FAS Axe FX2 USB Bootloader : ready to go" and "AXE FX 2 : failed... Didn't work after all, because Axe Edit can't connect. I can't...
  10. Mornna84

    Bug? Driver install problem

    Yep, same result with any port, USB 2.0, USB 3.0, doesn't change anything. The only varying stuff is sometimes I get error code 100, sometimes the error code 116.
  11. Mornna84

    Bug? Driver install problem

    It's been a while I'm trying to install the latest Axe FX 2 Driver package 2014.06.06, and there's always the same kind of error happening during the boot-loader install step. Everything goes fine until that instructions message telling me to switch the axe on and click next (which I do), and...
  12. Mornna84

    Please, please no more daily Updates!!!

    Keep the FW updates flowing! Each one of us is free to update whenever he wants to, but I 100% agree with Cliff on this: why not fixing known bugs? The Axe is filled with endless possibilities. So I don't know yet if a known bug won't annoy me if I don't update to the latest FW. And I surely...
  13. Mornna84

    Can't change excursion time since FW18.08?

    Thank you Cliff, that's what I suspected... No problem, it was not that i missed this parameter (not this time... ;)). I thought maybe the user-accessibility of the excursion time parameter was loosing its necessity since the new G3 modelling technology. After all, even if the axe-fx is the...
  14. Mornna84

    Can't change excursion time since FW18.08?

    Don't get me wrong, to me, FW18.08 is really the best FW I ever had in my axe-fx2. The one and only thing that puzzles me a little bit since i updated is this time excursion issue. As I only gig on very rare occasions, my axe-fx is always connected to my studio computer and I only manage it...
  15. Mornna84

    Axe-Fx II Firmware 18.07 Released

    Even though Cliff stated 18.07 was the best FW he ever made, I really have a strong feeling that 18.08 will be even better...
  16. Mornna84

    Miss the "Vintage" preamp tube ?

    That was exactly my point (post #19). The difference would be barely audible, maybe even not audible at all, depending on the whole chain. THE noticeable difference is mainly in the FEEL (but also slightly in the sustain), not the tone.
  17. Mornna84

    Miss the "Vintage" preamp tube ?

    I feel sorry for everyone feeling this is a too "serious" thread, it really wasn't meant to be... (also meaning that I decline any responsibility for having made this thread "too serious" :D )
  18. Mornna84

    Miss the "Vintage" preamp tube ?

    Just about the "vintage" terminology argument, it is precisely because the "vintage" tubes are the most saturated ones that those provided me more sustain regarding my lead tones. I am well-aware that those tubes were not supposed to produce a vintage-like tone... But I also understand it could...
  19. Mornna84

    Miss the "Vintage" preamp tube ?

    I don't think any audio clip will make you clearly understand how different it is between the "vintage" and the other tube types. I guess the only audible difference is the sustain of single notes using low-mid gain lead tone. To me, the difference is a combination of the feel (attack, dynamic...
  20. Mornna84

    Miss the "Vintage" preamp tube ?

    Glad I'm not alone missing it! What's kinda frustrating is that my current addiction to those Vintage PTs prevents me from enjoying the benefits from FW18.07, which I enjoyed to some extend for several minutes... Now I'm trying to find a solution by taking my lead presets, switching to long...
  21. Mornna84

    Miss the "Vintage" preamp tube ?

    OK,ok, I know... As soon as something is removed from a new FW, there always gotta be someone missing it. But I feel in this case, that's not just nostalgia nonsense. I understand that the "Vintage" type of preamp tubes (PTs) were the least accurate regarding PTs in the real world...
  22. Mornna84

    Anyone one else thinks the recto2 is weird since 18.04?

    Phil, are you sure the problem you have is only for the Recto amp? Do you have a compressor block in the chain? I was thinking, if the FW you had before 18.04 was earlier than 18.XX, this might come from the compressor block (if you have one in the chain), as its volume was changed by about...
  23. Mornna84

    Background noise when AxeEdit is open since official FW18.04

    Thanks for the suggestion. The AxeFx2 is on a power conditioner that itself is plugged on the same outlet as the computer I use. My USB audio interface is powered through its USB connection. I did a few checks. If USB ground loop it is, then it has to be the USB connection of my audio interface...
  24. Mornna84

    Background noise when AxeEdit is open since official FW18.04

    Since I updated to FW18.04, there is a quite annoying digital background noise happening ONLY when AxeEdit is open. This noise is something like a hiss which is clearly audible when playing a note and then muting it. This noise is very noticeable when the note is dying. I guess it has something...
  25. Mornna84

    absence of bypass mode for the enhancer block...

    Yeah, it seems I'm gonna have to do this... until FAS will maybe one day add the bypass option to the enhancer. I actually got one super delay-wet signal + one balanced delay-dry/wet signal going into the reverb. For some reason, it was easier for me to achieve the atmospheric fx part that i was...
  26. Mornna84

    absence of bypass mode for the enhancer block...

    BTW, for the scenes in which the Enhancer is on, the GateExp is off, and vice versa...
  27. Mornna84

    absence of bypass mode for the enhancer block...

    I am not using it in parallel, but in a scene dependent "branch", like this: It's active for some scenes, bypassed for other scenes.
  28. Mornna84

    absence of bypass mode for the enhancer block...

    Hey guys, It seems to me there is no bypass mode option for the enhancer mode. This is quite uncomfortable to me as I want to include the enhancer block in a branch of my FX chain that only activates for some scenes. Simply bypassing the enhancer block induces a way higher volume as this...
  29. Mornna84

    Non-working FAS Driver package v2014.06.06 on Windows 7

    It's USB 2.0 and I've tried everything. Rebooting between uninstalling the old driver and installing the new one doesn't help, but now something changed: it won't let the driver install anymore! It says "Driver Install Error Code: 116". I even tried with a special booting option "Disable...
  30. Mornna84

    Non-working FAS Driver package v2014.06.06 on Windows 7

    I apologize in advance if this thread is in the wrong section, but I haven't seen any other place to put this one. When updating my driver (followed exactly the correct uninstall/install procedure) to the v2014.06.06, no communication at all between the AxeFX2 and the computer. Device 0 doesn't...
  31. Mornna84

    Any way to rename global blocks??

    I haven't found how to do so, as ending up having multiple different "Amp 1" global blocks becomes a hassle. For the moment, I almost have to stick a post-it on the axe-fx to remember what each global block is...
Top Bottom