• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. michaiel

    Queensrÿche - "Jet City Woman" presets

    Moke, Maybe he will chime in and let us know about the clean channel... Yep Fractool doesn't always convert everything, but it is still an outstanding tool! Thank you for making the effort...I have several of your purchased presets and you do an outstanding job on them...!!!
  2. michaiel

    Queensrÿche - "Jet City Woman" presets

    Fantastic job! Attempting to convert to FM3... Can you screen shot the cabs? FracTool doesn't clarify your lead cabs... Bank 1 "scratchpad" Bank 2 "Factory 1" (1x6 Oval)? Looks like your rhythm cabs are Legacy 108 "4x12 Petrucci V30 Mix" Thanks
  3. michaiel

    Tried USA Pre Clean with no cab.....WOW!

    Thanks guys for making the effort!
  4. michaiel

    Tried USA Pre Clean with no cab.....WOW!

    Has anyone converted this patch to FM3? FracTool will, but it won't import into FM3 Edit. I suspect too much CPU or effects blocks used...
  5. michaiel

    Closed Create Patches Without FM3 Connected?

    Thanks for clarifying...
  6. michaiel

    Closed Create Patches Without FM3 Connected?

    I have some down time at work and would like to build some patches, but cant bring FM3 to work. Is there a work around for this? Thanks
  7. michaiel

    Re-amping Analog 96kHz

    Re-amping is easy, but cannot run Cab-Lab standalone while your DAW interface is at 96kHz as I was fearing... I am going to start another post about this and hope Cliff is looking...
  8. michaiel

    Re-amping Analog 96kHz

    You are absolutely right, I know now I should have kept the question more specific....all is good....
  9. michaiel

    Re-amping Analog 96kHz

    You are right the two tracks will be almost indistinguishable. There are only 2 reasons for recording at 96kHz Lowest possible buffer setting for tracking Mixing with time based effects Again... "I spelled out instructions on how to do this to help other Pro Tools members...I will apply it in...
  10. michaiel

    Re-amping Analog 96kHz

    Adding better clocking is going to give better low jitter...
  11. michaiel

    Re-amping Analog 96kHz

    Again...this thread is about giving Pro Tools users an alternative to Cab-Lab as a stand alone (if it will work) for not only editing the cab in real time, but also allowing the user to record at 96kHz. We are talking about patching 3 cords and setting up 2 channels...everyday duties at the...
  12. michaiel

    Re-amping Analog 96kHz

    Quality converters AND monitors...you can't fix it IF you can't hear it....
  13. michaiel

    Re-amping Analog 96kHz

    I haven't either, but to be fair to steadystate We don't record with very much gain so I can't comment. I found over the years less gain the better....
  14. michaiel

    Re-amping Analog 96kHz

    I agree...ran into the same conclusion...
  15. michaiel

    Re-amping Analog 96kHz

    If that were true then most producers would be running at 48kHz without any analog front or backend gear. I personally don't know of any commercial studio(s) running without racks of analog gear... 48kHz is primarily for the film industry and that is going to 96kHz. Every DAW out there can run...
  16. michaiel

    Re-amping Analog 96kHz

    This started to help out another member who also wanted an AAX version of Cab-Lab which Cliff has stated will not happen. I appreciate you playing devils advocate, some methods are uneccessary, but my original question is I am looking for members who want to contribute to experimenting with...
  17. michaiel

    Re-amping Analog 96kHz

    I track the entire band at 96kHz because I can run at 32 samples for tracking...The 96kHz allows you to almost cut your latency in half and time delay effects such as reverb and delay are more detailed and translate better to final mixes. It is a waste of studio time and hard drive space to save...
  18. michaiel

    Re-amping Analog 96kHz

    I was trying to answer another post about using Cab-Lab 3 Standalone in Pro Tools when I realized I wasn't re-amping at a true 96kHz and wanted to post a possible solution... Since there won't be an AAX version for the plugin version AND we are fixed at 48kHz, I wanted to try re-amping "analog"...
  19. michaiel

    Antares ATG-1 as a controller for the Axe FX XL+

    I did finally get a reply on their forum..... "Did call back just now, but may have gotten the wrong number. Please email support if you want to get in touch with me. The current software (v3.32) is not going to stop working. There will simply be no more updates to the software. Keep in mind...
  20. michaiel

    Antares ATG-1 as a controller for the Axe FX XL+

    Like Barthrecords said just have to wrap our heads around implementing Midi CC with the two devices... Henrik at Antarestech is the one who could enlighten us on what to expect, but he is not returning phone calls...
  21. michaiel

    Antares ATG-1 as a controller for the Axe FX XL+

    Yea....I figured I was in for learning lesson as well...Thanks for info...
  22. michaiel

    Antares ATG-1 as a controller for the Axe FX XL+

    Does anybody have a thread started about using the Antares ATG-1 as a scene and bank controller for live use? I haven't found anything on the internet or this forum yet....
  23. michaiel

    Axe Fx XL+ and Antares ATG-1 Midi

    I may have answered my own question.....although it appears you would need two... https://www.sweetwater.com/store/detail/MLAXLR
  24. michaiel

    Axe Fx XL+ and Antares ATG-1 Midi

    Have had mine for 2 months and Henrik at Antarestech is not returning my phone calls or replying on their forum either.... The ATG-1 is ten times better than the Boss GP-10 (terrible tracking on alternate tunings)....I know there are several members here who also own the ATG-1 or the luthers kits..
  25. michaiel

    Axe Fx XL+ and Antares ATG-1 Midi

    I am assuming it is possible in theory to run the ATG-1 like the MFC101. I just want scene and bank changes via the ATG-1 AND simplify the cables running to it (power and midi). Question is is there a converter available to use the FASlink (XLR) connector and the midi i/o of the ATG-1...
  26. michaiel

    AustinBuddy Naked Amps Tone Pack (still) Rules! ... New Website up...FM3...coming soon(ish)

    Fantastic patches...made my sessions move quicker while auditioning for tracking....
  27. michaiel

    80s Lead Tone with Roland JC-120

    That would be too good to be true....Yes Please...
  28. michaiel

    80s Lead Tone with Roland JC-120

    Its possible, but I have seen this several times in the past...little hints here and there in QR interviews... It was a common technique in the 80s to run a distortion pedal in front of a clean amp to get that Shrapnel lead tone. Satriani recorded his first album with a DS-1 and a JC-120.
  29. michaiel

    80s Lead Tone with Roland JC-120

    Thanks I will give that a try...
  30. michaiel

    80s Lead Tone with Roland JC-120

    I have been experimenting with the stock IRs, just haven't found the right one yet....
  31. michaiel

    80s Lead Tone with Roland JC-120

    http://ampsandgreenscreens.com/2013/06/16/interview-with-michael-wilton-of-queensryche-61013/ "Amps: I understand you used a lot of gear from the Mindcrime/Empire-era for recording. How was it going back to that, and did it have any impact on your writing mindset for this record? Michael: Yeah...
  32. michaiel

    80s Lead Tone with Roland JC-120

    Anyone had any luck creating an 80s lead tone with the Roland JC-120? Supposedly running a "distortion" pedal thru the Roland JC-120 was used on Queensryche Empire album. Been trying to duplicate this with limited success with the Rat pedal. Cant seem to dial out the honky tone of it though...
  33. michaiel

    TC Electronic Sub'N'Up Octaver Pedal

    This pedal and the Eventide Pitchfactor both are contenders... I just don't like stacking gear on gear unless I have to...
  34. michaiel

    TC Electronic Sub'N'Up Octaver Pedal

    After attempting this for weeks, I agree....
  35. michaiel

    TC Electronic Sub'N'Up Octaver Pedal

    I have had a lot of fun with the TC Electronic Sub'N'Up Octaver Pedal, but have failed to duplicate a effective octave up effect with the axe fx pitch shift that tracks as well as the pedal. Any body know how i can possibly emulate the pedal as closely as possible with axe fx? thanks
  36. michaiel

    Anyone have Def leppard stems (Phil Collen leads)

    thank you for the files...
  37. michaiel

    Tone Match Question

    I have my Axe Fx XL+ connected SPDIF to my interface and not sure I understand how to do the "Offline" version... I have an audio file in Pro Tools and want to Tone Match it... Could someone point me to an existing step by step instructions or forum post that covers this? thanks
  38. michaiel

    Def Leppard Foolin

    No replies from Mark....I am sure he is busy, I did bump another older thread I found and see if it will bear any fruit :) I have been sitting in front of my near fields for weeks now experimenting with the G3 amps in different mixes and it can be fatiguing trying to separate the differences...
  39. michaiel

    Anyone have Def leppard stems (Phil Collen leads)

    I wanted to revive this thread....I sent VegasGuitar and ari a pm as well. Does anybody have these stems or a tone match of them already they could share? thanks
  40. michaiel

    Queensryche Patches

    what? could you clarify? :)
  41. michaiel

    Queensryche Patches

    Sooo... It looks like I will use the Preset Reporter to have the values from the original patches and build from scratch which I don't have a problem with. Just more work. Will this continue to be an ongoing problem everytime Fractal decides to update the firmware or is just the transition...
  42. michaiel

    Queensryche Patches

    Admin M@ said this in another post I found... I just discovered you don't even need to install 2 copies of Axe Edit. You can fire up Axe-Edit, set its MIDI IN/OUT to "NONE" set the config to ULTRA, open or import saved Ultra/Std. files, then run another instance actively connected to the Axe-Fx...
  43. michaiel

    Queensryche Patches

    Maybe someone could create a patch convertor for all the firmware version changes. I know it won't be exact, but at least you would have the basic building blocks to work with....hint, hint, Cliff
  44. michaiel

    Queensryche Patches

    Thats what I was trying to figure out....Explains why most of the patches I found online won't import...:( I have Parallels installed on my Macbook and downloaded the patch report and printed it....Yeahaw buddy this is going to be fun...alot of values to tweek. It does show the signal path of...
  45. michaiel

    Queensryche Patches

    I am using Jet City Woman as a comparison on clean and od tones
  46. michaiel

    Queensryche Patches

    winger...I am assuming that the patches can't be just uploaded to the Axe Exchange then downloaded again converting them to the current firmware version? How about some sort of patch report to use as a starting point and manually create the patch from scratch...
  47. michaiel

    Queensryche Patches

    Just a stupid question... What if I upload these patches to the Axe Exchange then download them again. Would that work?
  48. michaiel

    Queensryche Patches

    Haven't found any legacy version so far. I only see firmware version 11 for the Axe Fx. I do not see any for the Axe Edit. :( Does anyone have a direct link? I also started a tech support post, maybe they will chime in...
  49. michaiel

    Queensryche Patches

    I did not want to intrude and ask shamelessly, but since winger did it for me I second the request :encouragement: Sorry winger, not throwing you under the tour bus :)
  50. michaiel

    Queensryche Patches

    I am on a Mac, I am assuming I need to install the legacy version on a different computer or a different user on the same computer?
  51. michaiel

    Queensryche Patches

    Very cool...do you have any idea how to open these syx files? I thought that the XL+ could load any preset...
  52. michaiel

    Queensryche Patches

    Ok...The syx files wont open. I tried to open them via Axe Edit. I thought that my new Axe Fx XL+ would open any older files....am I wrong? Can anyone enlighten me on how to open these files? thanks
  53. michaiel

    Queensryche Patches

    just found it here.... Rig-Talk • View topic - AXEFX VIDEO, Queensryche, Indie Guitar, Ver 9 UBER sim
  54. michaiel

    Queensryche Patches

    Found a couple of Queensryche patches to learn on the Axe Exchange. Does anybody have Mark Day's Queesnsryche patches? The V9 patch I found for him has a dead MobileMe link... ;( https://www.youtube.com/watch?v=4Zu3xprPhAk Thanks
  55. michaiel

    Def Leppard Foolin

    Thanks for jumping in on this.....
  56. michaiel

    Def Leppard Foolin

    I sent him a pm and the link. Maybe he will chime in on this...
  57. michaiel

    Def Leppard Foolin

    Anybody have a Foolin preset? I have seen several audio files, but nothing on the exchange. thanks
  58. michaiel

    Turning Tuner ON/OFF with Pedal Jack

    I assume either will work? Thanks for the quick replies...
  59. michaiel

    Turning Tuner ON/OFF with Pedal Jack

    Can I use a momentary or switch to set up my Axe Fx II XL+ to mute and turn on the tuner via either the Pedal 1 or 2 jacks? I have been reading thru the manual, but haven't found which page it is on. thanks
  60. michaiel

    Keyboard Short Cuts

    thanks for the reply
  61. michaiel

    Keyboard Short Cuts

    There is a list here... Axe-Fx II: Axe-Edit - Axe-Fx II Wiki Found the Getting Started Guide... http://www.fractalaudio.com/downloads/manuals/axe-edit/Axe-Edit-Getting-Started-Guide.pdf
  62. michaiel

    Keyboard Short Cuts

    Is there a list of keyboard and/or mouse shortcuts for the Axe Fx Editor? thanks
  63. michaiel

    FASLINK to Midi Adapter

    Maybe something like this? MIDI to XLR adapter
  64. michaiel

    FASLINK to Midi Adapter

    I have been looking for a small foot controller for my Axe FX II XL+. I would like to take advantage of the FASLINK connector and wanted to know if anyone could recommend a Midi to XLR converter that would be compatible with the Fractal. Almost all of the foot controllers are still using...
  65. michaiel

    AXE-FX Dead!

    Yea....I checked everything. Its dead. Fractal just emailed me so hopefullly I will get it solved soon. thanks
  66. michaiel

    AXE-FX Dead!

    My Axe-Fx does not power up. I bought it directly from Fractal back in December and have been using almost every day, but last night I powered up the studio and the Axe-Fx is the only thing not working. I did an email to Fractal. Has anyone experienced this? I have multiple sessions this week...
  67. michaiel

    Patch Setup Questions

    Could someone chime in and help me setup this signal chain. I want 2 amps Clean Overdrive I want to use an expression pedal to fade between the two amps I want the xlr for FOH I want the aux for going to the amp on stage. I wanted to include a pic but the "board attachment quota has been...
  68. michaiel

    Liquid Foot Jr. Expression Pedal Question

    Wow!! Thanks for the pic and excellent explaination!
  69. michaiel

    Liquid Foot Jr. Expression Pedal Question

    I have 2 separate rigs setup in Axe Fx (Clean and Distorted) and I want to use an expression pedal to fade from Clean (heal) to Distorted (toe). I know this could be a Light-Foot forum question, but I wanted to check here also and see if anyone has been able to do this here. I am new to both so...
Top Bottom