• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. nambutio

    Axe-Fx III Firmware Release Version 15.01

    The sound is back but FC-12 is freeze. When I recall the system settings, the output goes out again and the FC-12 works. :eek:
  2. nambutio

    Axe-Fx III Firmware Release Version 15.01

    I reinstalled the 15.01 firmware and nothing. I reinstalled the 15.00 firmware and nothing, so I did a reset in the system parameters and the sound came back. Curious why this happened since the last time I hung up everything was fine. Thanks Cliff for support and your beautiful work! :)
  3. nambutio

    Axe-Fx III Firmware Release Version 15.01

    Hello! I did it , Sir! I changed presets and nothing. I'll reinstall the firmware
  4. nambutio

    Axe-Fx III Firmware Release Version 15.01

    Today when I turned on Ax Fx 3 there is no sound at output 1 or at output 4. Only at output 2 and 3. What could have happened? Fimware 15.01
  5. nambutio

    Windows 10 USB audio stops

    I have the same problem with iMac 2020
  6. nambutio

    MacOS Catalina Core Audio Issue?

    The new MAC USB Beta Firmware didn't work for me! It improved a little bit, more still happens.
  7. nambutio

    Reset communication timeout without reboot

    I have this problem and the new USB Driver didn't solve.
  8. nambutio

    MacOS Catalina Core Audio Issue?

    I need this! I cannot record via USB. The audio works a little and stops on my iMac 2020. :cry:
  9. nambutio

    RIP EVH

    That made me cry! Is very...:cry::cry::cry::cry::cry::cry::cry::cry::cry:
  10. nambutio

    Anyone "upgrade" to an external delay pedal?

    I have one and a Eventide Eclipse. TC 2290 is the one!
  11. nambutio

    Class-A Amps

    Hello! :) From firmware 12.04 Class-A Amps became very hot. They lost a lot of headroom, making it difficult to get a clean sound. Did you feel that?
  12. nambutio

    Vendor AustinBuddy's 1000+ "LIVE GOLD" TonePack for FM3 for Firmware 3.x is now available!

    My sincere apologies! :) No problem! What I got is very good and will keep me busy. :);)
  13. nambutio

    Vendor AustinBuddy's 1000+ "LIVE GOLD" TonePack for FM3 for Firmware 3.x is now available!

    Hello, Sir! I bought it this afternoon and haven't seen the update yet.
  14. nambutio

    Vendor AustinBuddy's 1000+ "LIVE GOLD" TonePack for FM3 for Firmware 3.x is now available!

    Hello! :) I'm trying to register at https://austinbuddy.com/, but the recaptcha doesn't show the option for me to select and it gives an error! However, it says that my email was already registered when trying again. When trying to login this happened...
  15. nambutio

    Vendor AustinBuddy's 1000+ "LIVE GOLD" TonePack for FM3 for Firmware 3.x is now available!

    Ohh, Sir! Thank you soo much for your advice! ;)
  16. nambutio

    Vendor AustinBuddy's 1000+ "LIVE GOLD" TonePack for FM3 for Firmware 3.x is now available!

    Hello, guys! :) I'm in doubt between Naked Amps and Live Gold! Suggestions? I would be very grateful. I have AXE FX III and FC-12! :)
  17. nambutio

    12.08, not clean anymore....

    Hello, Sir! :) The Amp you mentioned updated the CATHODE RESISTENCE! Put the old values and you will see the change. I use Class-A Amps and I noticed that too and after I made the change it was the way I like it.
  18. nambutio

    Axe-Fx III Firmware Release Version 12.08 Public Beta 3

    Hello, Sir! I checked! This is happening to most of them. Maybe it's Axe Edit (vs 1.05.12 beta) Thanks for reply.
  19. nambutio

    Axe-Fx III Firmware Release Version 12.08 Public Beta 3

    After what happened I touched the USB cable and the foot cable, I thought it was that, so I didn't comment here. I commented after that the friend Wallygatorr1976 posted with the same symptoms.
  20. nambutio

    Axe-Fx III Firmware Release Version 12.08 Public Beta 3

    Yes. I looked again to make sure. It happened twice! After that it's normal. I didn’t turn on Axe Edit more, since it freezes
  21. nambutio

    Axe-Fx III Firmware Release Version 12.08 Public Beta 3

    Hello, Sir! Both times it happened when I switched to this preset.
  22. nambutio

    Axe-Fx III Firmware Release Version 12.08 Public Beta 3

    I've had the same problem!
  23. nambutio

    Axe-Fx III Firmware Release Version 12.08 Public Beta

    Understand! :) Thank you for your explanation and patience with a layman on the subject!
  24. nambutio

    Axe-Fx III Firmware Release Version 12.08 Public Beta

    I'm not interested! I asked out of curiosity. I am very happy with what I have and your wonderful work. I never asked for anything, but I would like to ask now Forgive me and be more patient.
  25. nambutio

    Axe-Fx III Firmware Release Version 12.08 Public Beta

    Ohh thanks!!! 👆 And Fernandes system (feedback)! It’s possible?
  26. nambutio

    Axe-Fx III Firmware Release Version 12.08 Public Beta

    Stratocaster VG make this. I have one and work very well! 😀
  27. nambutio

    Axe Fx III with Eventide Eclipse

    Ohhh! Thanks, Sir! 🥳🥳🥳😃😀🎶
  28. nambutio

    Axe Fx III with Eventide Eclipse

    Hello! Do you have your Eclipse presets? 😊
  29. nambutio

    Humbuster Cable for Instrument

    Bingo! I wired the T and R (TRS side) for T (TS side). Sorry, my mistake!
  30. nambutio

    Humbuster Cable for Instrument

    Other problem. Using Humbester in TC 2290 I have a honky frequency in my signal, non-humbester, Ok!
  31. nambutio

    Humbuster Cable for Instrument

    No problem! ;):D
  32. nambutio

    Humbuster Cable for Instrument

    Hello! Weezing would be like noise or hizz! Non-Humbuster, Ok!
  33. nambutio

    Humbuster Cable for Instrument

    Using Humbuster cable with my Axe FX 3 --> Mesa 2:90 I hear a weezing. Ideas?
  34. nambutio

    Axe-Fx III Firmware Release Version 12.03

    After a long wait I acquired the Ax FX 3 and the FC-12! Axe FX 2 and MFC are gone after wonderful years. I felt a lot of difference in playability and many other things. Thanks Cliff and team.
  35. nambutio

    Axe Fx III with Axe FX II XL and Mfc 101

    Hello Guys! I can to use the Axe FX 2 XL and MFC 101 to control the Axe FX III? Or just the MFC 101?
  36. nambutio

    Axe-Fx III Firmware Version 9.01

    Enjoy it! ;)
  37. nambutio

    Axe-Fx III Firmware Version 9.01

    No videos? :p
  38. nambutio

    Jazz 120 level/modeling issue?

    Turn up the master (full) and adjust. :)
  39. nambutio

    Mesa 2:90 + Axe-Fx 2 (hard compress)

    The problem was in the compressor! I took the amp for maintenance and everything is normal. Compression is more present due to new modeling. Thanks for reply :)
  40. nambutio

    Mesa 2:90 + Axe-Fx 2 (hard compress)

    Hello! I have a problem with my Mesa Boogie 2:90 Amp! I thought it was the new firmware, but it's not! It is very compressed, it seems that there is a compressor in front with pops. Has anyone had a similar problem? :coldsweat:
  41. nambutio

    Axe-Fx III Firmware Version 9.00 Public Beta

    Is there this problem in the Axe FX 2, too?
  42. nambutio

    Axe-Fx II "Ares" Rev 2.00 Firmware Release

    In my setup (Axe + Mesa 2: 90 + Real Cabs) Ares 1.03 didn't sound good! The problem in my case was the Grid Clip which was shrill as well as the Speaker Compl (on or off)! Even adjusting was not good. Ares 2.0 is just perfect !!! I feel the brutal difference when I play with the pick and the...
  43. nambutio

    Axe-Fx II "Ares" Rev 1.03 Firmware Release

    I use Mesa Boogie 2:90, so I had to leave the Power Amp Hardness at 0 - 1.00 and the CF Hardness at 5.00 - 6.00. Perfect!
  44. nambutio

    Axe-Fx II "Ares" Rev 1.03 Firmware Release

    Hello, Simeon! :) I was able to adjust. I found the parameters that make the difference. Thank you for support!
  45. nambutio

    Axe-Fx II "Ares" Rev 1.03 Firmware Release

    I like these new features you mentioned and I think you're right. Of all this I miss the middle
  46. nambutio

    Axe-Fx II "Ares" Rev 1.03 Firmware Release

    I noticed the lack of low end too. I even thought about going back to using the 2:90 deep mode again. Perhaps that's why the treble are so pronounced, since the middles don't so present!
  47. nambutio

    Axe-Fx II "Ares" Rev 1.03 Firmware Release

    I read a Quantum 10.01 preset (Ares 1.01 too) and copied the amp to X and Y. I reset the X amp and made the same settings as it had on the Y amp. Doing a comparison of presets I noticed that the mids have been scooped out completely and everything is very bright. Even adjusting I can't match...
  48. nambutio

    Axe-Fx II "Ares" Rev 1.03 Firmware Release

    Hello, gentlemen! I'll give you a review about yesterday's gig! After resetting and adjusting all my patches I noticed that this firmware responds little in the middle region. It has a lot more treble which left my presets a bit harsh, since the middle ones are less. I'll try to adjust, but I...
  49. nambutio

    Axe-Fx II "Ares" Rev 1.02 Firmware Release

    Hello, Sir! Truth! I posted why I first did it through Ax Edit, only then did it directly on Ax Fx! :) Sorry for the misunderstanding. :)
  50. nambutio

    Axe-Fx II "Ares" Rev 1.02 Firmware Release

    My Axe Edit is 3.14.4! :)
  51. nambutio

    Axe-Fx II "Ares" Rev 1.02 Firmware Release

    CF Hardness Ratio not, but still exists Preamp Cf Hardness
  52. nambutio

    AX8 Firmware Version 10.01

    Can someone explain this joke to me? :D I've seen several references in the forum, but I never understood!
  53. nambutio

    Fixed Axe-Fx II CF Hardness

    Hello! If you enter "0" in Preamp CF Hardness the Axe Fx hangs all!
  54. nambutio

    Axe-Fx II "Ares" Rev 1.02 Firmware Release

    By the way, doing directly in Axe-Fx II XL happens the same thing!
  55. nambutio

    Axe-Fx II "Ares" Rev 1.02 Firmware Release

    New Axe Edit + Axe II Xl Bug If you enter "0" in Preamp CF Hardness the Axe Fx hangs all
  56. nambutio

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    Man! You have a big heart :) Thank you, Sir!
  57. nambutio

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    By the way! Thank you very much, Cliff! For your work and your team! Soon I will be able to realize my dream and to have the AXE FX III! :):D
  58. nambutio

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    Yes! it is higher compared to what it was on the previous firmware! I need setting the level comp with -2.0 db. So I was having trouble adjusting clean tones. I know this firmware has more gain with Vox amps, but with makeup on the gain is higher. Sdd preamp also has different gain! I don't know...
  59. nambutio

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    Sorry, Sir! In the tests what I did the gain difference with the attached makeup is much higher compared to the other compressors. Sorry for my English!
  60. nambutio

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    There is something wrong with Makeup compression (Studio Comp)
  61. nambutio

    AF2 Ares amp block gain?

    In the test that I did, I had to decrease Preamp CF Hardness to 3.33 in AC30Tb! I noticed more gain with the SDD Preamp as well
  62. nambutio

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    Amps are very different from the previous version! Much more gain. I'll need time to adjust! :)
  63. nambutio

    Bug? 10.01 Scene Bug

    Axe Fx XL cut or leg when I change Scene! When I power on the select amp don't seem the same sound, after I press MFC foot it go on!
  64. nambutio

    Axe-Fx II "Quantum" Rev 10.01 Firmware Release

    10.01 Axe Fx XL Scene Bug! Sound cut in the change
  65. nambutio

    "Skipp the wait-list price"?

    I speak portuguese. Can I work with you? ;):D
  66. nambutio

    Is 9.04 The Last Firmware For The Axe-Fx II?

    Heart, man! You have heart, Sr! :)
  67. nambutio

    Any FC release time info ?

    What captivated me when I saw Axe II was the footswitch. It did not follow that common pattern of the market. Five, ten switches. With them (MFC) no tap dancing!
  68. nambutio

    Since it's looking like we won't be able to use the MFC-101...

    Alright with the new features of FC! But it would be wise to leave the MFC running too!
  69. nambutio

    Any FC release time info ?

    I think the same way!
  70. nambutio

    Presenting... The Axe-Fx III

    I'll need two. One for the 10 presets and one for the scenes and effects! I would love to be able to continue using the MFC-101 Faslink with Ax III! :( Bringing equipment to Brazil is difficult! :( How I wanted to be American! Blessed people!
  71. nambutio

    Presenting... The Axe-Fx III

    Me two!!! I expected something like this.
  72. nambutio

    Presenting... The Axe-Fx III

    Two amp blocks in high resolution?
  73. nambutio

    Presenting... The Axe-Fx III

    Multi Tap Delay 5? And the others five?
  74. nambutio

    So What's New on the III? ...(Axe-Fx II vs III)

    I will need two FC-12! I like footswitches! :)
  75. nambutio

    Axe-Fx II "Quantum" Rev 9.04 Firmware Release

    Plexi 50W 6550 updated Pwr TubeGrid Bias for 0.600. Before 0.480. Very nice!!! Thanks Cliff and Fractal Team! :)
  76. nambutio

    Axe-Fx II "Quantum" Rev 9.01 Firmware Release

    Ohhhh!!! You said Matchless DC30 EF86 channel? With all the voices? :)
  77. nambutio

    Axe-Fx II "Quantum" Rev 9.00 Firmware Release

    I hear clearly. In my setup change occurs.
  78. nambutio

    Axe-Fx II "Quantum" Rev 9.00 Firmware Release

    Can be perceptual bias. I hear this difference. Thanks Sir! :) Would you use the Speaker Comp with Mesa 2:90?
  79. nambutio

    Axe-Fx II "Quantum" Rev 9.00 Firmware Release

    100ms more smooth 200ms more aggressive or upper highs. Sorry but I dont kwon the correct term. This is where I feel the difference between 8.02 and 9.0.
  80. nambutio

    Axe-Fx II "Quantum" Rev 9.00 Firmware Release

    Hello guys! Even the "Speaker Comp" being at zero the difference in tone between "Engine Time Const" being between 100 and 200 it's big. I notice this with my power amp Mesa 2:90
  81. nambutio

    Axe-Fx II "Quantum" Rev 9.00 Firmware Release

    Preamp Dynamics 0.50 solved my problem! :)
  82. nambutio

    Axe-Fx II "Quantum" Rev 9.00 Beta

    Fractal Audio Systems Forum - Error This member limits who may view their full profile. :(
  83. nambutio

    Axe-Fx II "Quantum" Rev 9.00 Beta

    Dear Mr. Chase! Please fulfill this dream. (EF86 channel Full) I promise don`t ask for anything else. :rolleyes:
  84. nambutio

    Axe-Fx II "Quantum" Rev 9.00 Beta

    Hello! In my tests with poweramp mesa simul class 2:90 and two 2x12 cabs, Speaker Comp 1.00 - 1.50. Wonderfull!!!!
  85. nambutio

    Axe-Fx II "Quantum" Rev 8.02 Firmware Release

    The man pronounced himself
  86. nambutio

    USB Midi Big Problem!

    I changed the system and now everything is working. I read your post, but I had already installed Windows Seven ... :( I want to thank everyone for the answers. This forum is the best!
  87. nambutio

    USB Midi Big Problem!

    In my case audio works, but midi, no way!
  88. nambutio

    USB Midi Big Problem!

    I turned off Delta and the problem continues.
  89. nambutio

    USB Midi Big Problem!

    Right! I'll try
  90. nambutio

    USB Midi Big Problem!

    My firmware it's 8.01
  91. nambutio

    USB Midi Big Problem!

    I used MIDI-OX and...
  92. nambutio

    USB Midi Big Problem!

    I don't have other midi devices. For other things with Hds, pen drivers, etc...Ok!
  93. nambutio

    USB Midi Big Problem!

    Yes. I Did it!
  94. nambutio

    USB Midi Big Problem!

    Sorry, Sir! I have Presonus Studio Live via firewire, Delta 1010 what I use with my Fantom X7 and Sibelius. The Daw I don't install because this problem.
  95. nambutio

    USB Midi Big Problem!

    The only thing that don't work is the Midi. Audio Ok! Very strange!
Top Bottom