• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. Megahertzz

    XLR splitter to put between Output 1 and monitors/FOH

    I've taken this a step further and I am now considering whether it would be possible to add a stereo volume control to one of the mini module slots on the Templeboard, right next to the monitor outputs. My plan is to split Output 1 Left and Right into two separate outputs, where one pair of outs...
  2. Megahertzz

    OMG 9 without FC-6. How to use the 3 switches by themselves to do everything!

    Am I understanding it correctly that this is the OMG9 layout with the OMG3 in the free layout spots? All I have to do to switch between them is change bank size and startup layout?
  3. Megahertzz

    XLR splitter to put between Output 1 and monitors/FOH

    It seems this is the route to go. Thanks for the tip.
  4. Megahertzz

    XLR splitter to put between Output 1 and monitors/FOH

    The idea was to avoid using Output 2, so I could put my Whammy pedal in the loop.
  5. Megahertzz

    XLR splitter to put between Output 1 and monitors/FOH

    I'm looking for a splitter to put on (under) my pedalboard, but I have had no luck with Google. Maybe what I'm looking for doesn't exist (yet)? What I want is a passive splitter with 2 inputs and 4 outputs, where two of the L/R outputs go directly through the splitter (to FOH), and the other...
  6. Megahertzz

    Wish Secondary tap function for footswitches

    Nevermind, I'm an idiot. :weary:
  7. Megahertzz

    Wish Secondary tap function for footswitches

    Couldn't find out how in the switches setup. Can only find tap and hold function, not additional taps.
  8. Megahertzz

    Wish Secondary tap function for footswitches

    +1 for this. My wish is to be able to, for instance, use SW1 to toggle between Scene 1 and 2, SW2 toggles Scene 3 an 4 etc. It would also be very helpful to have a 3rd and 4th, even 8th press function on each switch if so desired. Imagine using one switch to increase scene# for each press of...
  9. Megahertzz

    I use the ML USA Djent cab pack from the Fractal site, but Leon Todds IRs also work very well...

    I use the ML USA Djent cab pack from the Fractal site, but Leon Todds IRs also work very well with my preset. You could also try any of the 4x12 V30 IR's in the factory cabs. It's been a few firmware updates since i posted the preset, so the amp block might need a little tweaking.
  10. Megahertzz

    Wish I/O Routing Matrix

    +1 More options for routing USB would be nice. Headphone output should also be a separate routable port.
  11. Megahertzz

    Expression Pedal Calibration Question

    Downloaded a MIDI monitor, but couldn't figure out how to use it. However, I don't think the MMGT is the issue. I tried calibrating it the way @JoKeR III suggested, still stopped at the same values in their respective blocks. Did a full reset of the MIDI config in the Axe, which seems to have...
  12. Megahertzz

    Expression Pedal Calibration Question

    I'm reviving this thread because it's still an issue for me. FX3 FW. 14.00, MMGT22 FW. 4.5.1. Mission pedals connected to the MMGT22 have been calibrated several times, still maxes out at 9.92 on wah block, 9.84 on volume block, and most annoying, 98.4 on pitch block. After a few seconds it...
  13. Megahertzz

    FM3/FC6 (OMG9) board setups?

    I'm considering putting the FM3 and FC6 on two separate boards, with one Mission EP-1 on each board, plus a Shure GLXD16 on the board with the FM3 and Mission Pedal. @2112 does the NUX Bumblebee fit both the Mission pedal and the GLXD16 together with the FM3 do you think?
  14. Megahertzz

    For those that have an Axe-Fx III and an FM3

    I currently own an FX3, and expect my FM3 will arrive late September. The way I see it, the FM3 is small multitool you bring with you when the entire toolbox is too much hassle. I'm most likely to use the FM3 for practice and eventual flying single gigs, and the FX3 for gigs within driving...
  15. Megahertzz

    Implemented Output Parametric EQ

    I think @2112 in one of his videos explained why he used EQ blocks instead of the global EQ, and I think he's really on to something. EQ blocks, both parametric and graphic, can be saved as global blocks, so when you adjust the EQ of one preset, it will apply for all presets using that saved...
  16. Megahertzz

    Steve Vai's David Lee Roth-era Jose Arredondo-modded Marshall Super Lead

    Thanks for the input. Really appreciate everything you're doing for the Fractal community, Leon.
  17. Megahertzz

    Steve Vai's David Lee Roth-era Jose Arredondo-modded Marshall Super Lead

    I didn't know about this amp before Pete posted this awesome video. Is there a way to replicate this in The Axe3, or better yet, any chance @FractalAudio can get his hands on this and model it? It's hands down the best Marshall I have heard.
  18. Megahertzz

    Is there a way to get USB audio to outputs 1 and 2 at the same time?

    I'm not sure I know what you mean by linked. I have set output 2 to copy output 1.
  19. Megahertzz

    Is there a way to get USB audio to outputs 1 and 2 at the same time?

    I can't seem to figure how to get the sound from my computer going to output 1 and 2 simultaneously. No matter what I try it's either one or the other, never both at the same time.
  20. Megahertzz

    Expression Pedal Calibration Question

    I did a reset of system parameters on the Axe, and on the GT22, and did a new setup on both units. Seems to be working now.
  21. Megahertzz

    Expression Pedal Calibration Question

    Yes. Rolled back to fw11, no change. back at 12.06 now. I posted the same problem at the RJM forum, but haven't gotten any concrete solution yet.
  22. Megahertzz

    Bug importing large preset?

    Here it is. Will probably be heavily modified the next few weeks. Got temporarily (I hope) laid off from work because off Covid-19, so I got plenty of time to tweak my presets. If you have any questions or suggestions I'd love to hear it. http://axechange.fractalaudio.com/detail.php?preset=7806
  23. Megahertzz

    Bug importing large preset?

    Sure, I can do that, but the pitch blocks I use are included in the preset i posted. So far I'm only using Pitch 1 for the lead in Whiskey In The Jar, and Pitch 2 for the harmonies in Creeping Death, Fade To Black and Blackened. I'm trying to figure out how to use 2 pitch blocks to do the...
  24. Megahertzz

    Expression Pedal Calibration Question

    Pedals have been calibrated several times, still ends up at 99.2%, although sometimes it stays at 99.2 a few seconds and then goes to 100. I'll try an earlier firmware and see if that helps. I'm still 99.2 % sure the midi controller is not the issue.
  25. Megahertzz

    Bug importing large preset?

    Here's the latest rendition of the preset, no global blocks. I also found out how to delete old uploads from Axe Change. http://axechange.fractalaudio.com/detail.php?preset=7805
  26. Megahertzz

    Bug importing large preset?

    Yup, sorry about that. Will reupload post haste. I really miss the ability to remove uploads from Axe Change.
  27. Megahertzz

    Expression Pedal Calibration Question

    Is this an issue regardless of floor controller? I have an RJM MMGT22 with two Mission SP-1's connected, where pdl. 2 doesn't go all the way to 100%.
  28. Megahertzz

    FM3 FC Switch Travel Cases?

    I have a 1u Matrix GT1000FX that I want to integrate into my pedalboard. Does one exist with a 1u rack space underneath?
  29. Megahertzz

    Implemented Output Parametric EQ

    +1 I wished for something similar. Global EQ is extremely useful when you need to quickly adjust your monitor sound to different types of room, different types of monitors, IEM, earplugs etc. Having the ability to switch between parametric and graphic EQ, and be able to store and bypass...
  30. Megahertzz

    Wish A few features I'd like to see implemented

    Added additional global EQ functions to the list.
  31. Megahertzz

    Need tone help. Reducing pick attack?

    I found that pick material and thickness, in addition to picking technique, has a huge impact on the sound of the pick attack. For instance, the Dunlop tortex picks were just to noisy for my playing, but the Ultex were just fine. I finally settled for the Dunlop Flow 1.0mm, which were just like...
  32. Megahertzz

    Wish Tuner Engages When Volume Block is at Minimum via Exp. Pedal

    I followed Ron's instructions in this thread. I'll post the file when I get home from work. Not sure the file I've linked to in the thread is still valid.
  33. Megahertzz

    Wish Tuner Engages When Volume Block is at Minimum via Exp. Pedal

    I managed to do this with expression pedals connected to my RJM MMGT22, and there is indeed an issue with this that needs sorting out. I dont know if the issue is in the Axe3 or the MMGT, but when going from heel down and tuner engaged (tuner NOT muting the Axe3) to toe down, the volume jumps...
  34. Megahertzz

    Wish A few features I'd like to see implemented

    The VU screen on the Axe FX 2 had Amp 1 and 2 block levels already assigned to knob A and B, and you could scroll through the presets with the main knob without exiting the menu. You didn't have to zoom in on the the layout page and click your way to the different amp blocks for each amp in each...
  35. Megahertzz

    Wish A few features I'd like to see implemented

    I have personally never used anything other than Amp block level for volume balancing, and I can't think of any reason to, but practices may differ. I think however that Amp block leveling is the most common. Output level adjustment would be mostly for volume boost on lead scenes. Either way, I...
  36. Megahertzz

    Wish Wish List: New Amps

    Dimebag's Randall amps from Cowboys From Hell and Far Beyond Driven, with pre and post EQ's pre set to his preferred settings. They could call the amp models FAS Beyond Driven and Cowpokes From Hell.
  37. Megahertzz

    Wish A few features I'd like to see implemented

    It might have been implemented in the last few updates, but it wasn't as of firmware 10.
  38. Megahertzz

    Wish A few features I'd like to see implemented

    Dedicated Preset, Scene and channel volume balancing menu: A utilities menu with a large, precise VU meter where you can easily adjust output volume across individual presets, scenes and channels using the main knob and the knobs underneath the screen. For instance, turning A and B knobs adjusts...
  39. Megahertzz

    Axe-Fx III Firmware Release Version 12.02

    This is why I don't update until the next beta is out :p
  40. Megahertzz

    What go you think is wrong with my Axe-Fx 3?

    Re-did the preset for you: https://forum.fractalaudio.com/threads/metallica-cover-band-extravaganza-my-live-metallica-preset.156961/
  41. Megahertzz

    Metallica cover band extravaganza (my live Metallica preset)

    I have stripped down and removed all modifiers and global blocks from my "Militia Mk.IIC++" preset, since the last version was too CPU demanding. I have put all amps/cabs in one block instead of separating distorted and clean amps in two blocks, and removed the pitch blocks...
  42. Megahertzz

    What go you think is wrong with my Axe-Fx 3?

    https://axechange.fractalaudio.com/detail.php?preset=7607 Hi. This is my preset, and I have heard about this issue from several people now. I've been using this patch as my "kitchen sink" preset at band practice for over a year now, and never had any problems, but when I have Axe Edit up i can...
  43. Megahertzz

    Tuner engage on exp. pedal heel down

    With the latest firmware update on the GT22 I finally managed to make the tuner engage on heel down on the expression pedal. The only problem is that there's a jump in volume from heel down when tuner disengages, instead of a smooth swell from complete silence. This happens even though the tuner...
  44. Megahertzz

    Delay with decending pitch

    Anyone smarter than me who can tell me how to copy the delay/pitch effect on the harmonica here?
  45. Megahertzz

    Default Q value = 1/√2

    Question for @FractalAudio: -Is there a connection between the default value for Q and the formula for calculating RMS?
  46. Megahertzz

    What hypothetical/non-existent FAS product would you actually buy?

    I would love to see an FM9. I'm wondering if you could make it twice as big, could it also be twice as powerful? I.e, could you get a full spec'ed Axe Fx III into a FC-12 sized floorboard?
  47. Megahertzz

    Wish FM3 as FC-3 foot controller

    It might be possible through the USB ports, maybe?
  48. Megahertzz

    Wish FM3 as FC-3 foot controller

    I'm considering buying an FM3 as a flying rig and backup to my Axe FX III. I'm wondering if it would be possible to make the FM3 function as a foot controller for the Axe FX III together with an FC6? I'm thinking I can manage with 9 buttons on both Axe FX and FM3, so that would be a nice way to...
  49. Megahertzz

    Delay and reverb sounds "disconnected" from the dry tone

    Delay in front of the amp block made the decay sound weird, but I tried putting it between the amp block and cab block, and that sounded a little better. Also, parallell routing and mix and gain at 100%, and using level to adjust the mix seemed to help.
  50. Megahertzz

    Wish Tuner Engages When Volume Block is at Minimum via Exp. Pedal

    Shouldn't be a problem as long as you don't set the tuner to mute the Axe Fx. Should be an option in the controller page of any block, including input and output blocks. There's a lot of different blocks people use to adjust volume.
  51. Megahertzz

    Wish Add Global option to Mixer block

    +1. Also on multiband compressor.
  52. Megahertzz

    Delay and reverb sounds "disconnected" from the dry tone

    I'm having trouble getting the "in the room" feel and sound from the reverb and delay blocks. This is especially apparent when playing through a PA in a live setting. The reverb, but especially the delay, doesn't sound like it's a natural part of the guitar tone. I would appreciate a few...
  53. Megahertzz

    RJM MMGT22 - Axe-Fx III latency

    Scene and effects switching on the Axe itself happens without delay. I used my rig without PC connected on my last band rehearsal, latency was still there. Could the cable length between GT and Axe be an issue? GT setup provided below...
  54. Megahertzz

    RJM MMGT22 - Axe-Fx III latency

    I'm using a Mastermind GT22 with my Axe FX III, connected via a phantom power box through a 6 pin XLR, and I'm experiencing quite a long latency from stepping on the button on the GT22 and until any change happens on the Axe FX. With my Axe FX 2XL and MFC-101 the change was instant. I'd say...
  55. Megahertzz

    Metallica's Kill 'Em All tone???

    I tried comparing to both, but what I want is the feel of the album for live playing. I know James used the same amp live until it was stolen, so something similar to their live sound in the early 80's would be satisfactory.
  56. Megahertzz

    Metallica's Kill 'Em All tone???

    Has anyone had any luck recreating Metallica's Kill 'Em All tone? I know they used a modded Marshall 1959SLP and a Pro Co RAT both for James' and Kirk's parts, but it's impossible to recreate their sound just based on that information. I haven't really had any luck with the other classic...
  57. Megahertzz

    Post Your Rig!

    I agree! There should be a "Get current preset" and a "Get all presets" button in addition to the current one. Would save me a lot of tapdancing on the GT.
  58. Megahertzz

    Post Your Rig!

    Just finished my Axe Fx III rig. Gotta say I'm pretty satisfied Gear: SKB 6u rolling rack: Furman PL-PRO DMC E power conditioner Matrix GT1000FX power amp into a Matrix CFR12 monitor Shure QLXD4 wireless Axe FX III Pedaltrain Pro pedalboard: Mission Engineering EP1-RJM x2 Mastermind GT22...
  59. Megahertzz

    Axe-Fx III Firmware Version 6.01

    That did it. Thanks.
  60. Megahertzz

    Axe-Fx III Firmware Version 6.01

    I'm not able to assign parameters to the perform screens, and Axe Edit III reads block definitions every time it connects to my Axe FX 3 now.
  61. Megahertzz

    Tuner engage on exp. pedal heel down

    I use an expression pedal for volume on all my presets, and always turn volume down between songs. Never experienced any accidental dropout, and this would in any case happen regardless of whether the tuner engages on heel down. The only issue would be if there's any latency between tuner...
  62. Megahertzz

    Tuner engage on exp. pedal heel down

    Elaborate, please.
  63. Megahertzz

    Wish Tuner engage on exp. pedal heel down.

    I want to be able to set up an expression pedal so that the tuner engages when the pedal is in full heel down position, regardless of which parameter and block the pedal is controlling. Mainly I want this to be able to quickly access the tuner between songs when I turn down volume on the volume...
  64. Megahertzz

    Patch Leveling

    That's what I do, for lack of a better option, but as I stated in my linked post, I wish there was a more streamlined workflow for leveling multiple presets and channels.
  65. Megahertzz

    Patch Leveling

    I'd love to see a dedicated preset/channel leveling page on the Axe FX III, like we have on the previous model. https://forum.fractalaudio.com/threads/vu-meter-for-levelling-between-presets-axe-fx-ii-style.144444/#post-1798662
  66. Megahertzz

    Tuner engage on exp. pedal heel down

    Is there a way to set up an expression pedal so that the tuner engages when the pedal is in full heel down position, regardless of which parameter and block the pedal is controlling? I want to be able to turn on the tuner when I turn the volume of either a volume block or output block all the...
  67. Megahertzz

    Wish VU meter for levelling between presets (Axe-Fx II style)

    I'm just gonna revive this. I still think leveling is unnecessarily tedious when you're doing multiple presets with multiple channels on multiple amp blocks. Also, large full-screen strobe tuner.
  68. Megahertzz

    RJM Mastermind GT/22 Compatibility?

    I havent been able to find a clear answer on the RJM forum or here, so I'm just gonna ask: What do I need to do to get my Mission SP-1 expression pedals compatible with the GT 22? Do I need to replace the toe switch with a momentary switch?
  69. Megahertzz

    Authentic amp controls - amazing

    I like Authentic Amp feature, by all means, but i wish there was a way to have both at the same time, like if there was one color for the authentic controls and another color for the rest. That way you could start a new preset by using the authentic controls if you wanted, and then tweak with...
  70. Megahertzz

    Do we have Global EQ presets on the III?

    Global input EQ combined with global noise gate, saved as separate presets for different guitars, instead of having to make several copies of the same presets tweaked for different guitars.
  71. Megahertzz

    Wish Axe-Edit: Assign color on multiple cabs and presets in the Manage tools

    If you can already do this in the picker window, then never mind. That's a lot easier than my suggestion.
  72. Megahertzz

    Wish Axe-Edit: Assign color on multiple cabs and presets in the Manage tools

    In Axe Edit, I would really like to have the option of assigning colors to multiple presets or cabs at once in Axe Manage Presets and Axe Manage Cabs in the Tools menu. Also, assigning colors to multiple amps at once would be nice.
  73. Megahertzz

    Wish VU meter for levelling between presets (Axe-Fx II style)

    Preset leveling in the Axe FX II was zero clicks, plus if you use more than just channel A in each amp block, it's a lot more than 3 clicks.
  74. Megahertzz

    How do I change the display as shown in picture

    Would be awesome if we could have different spectrum visualisations like on the old Winamp music player. Maybe on page 2 of a performance screen.
  75. Megahertzz

    Wish Make dedicated amp leveling screen

    I suggested the same thing, with some extra features I think would make leveling even easier than on the II. https://forum.fractalaudio.com/threads/vu-meter-for-levelling-between-presets-axe-fx-ii-style.144444/
  76. Megahertzz

    Wish VU meter for levelling between presets (Axe-Fx II style)

    This is a lot more tedious than on the Axe FX II, especially if you're using two amp blocks. I really hope we're getting a separate preset levelling menu on the III with separate dedicated to each amp block and quick levelling of the different channels on each block.
  77. Megahertzz

    Wish VU meter for levelling between presets (Axe-Fx II style)

    So, I've been with the Axe FX II for almost 5 years, and I kinda felt like cheating on my wife with a younger, better looking woman when I got the Axe FX III. Aside from the feeling of guilt and shame, I can't seem to find the right buttons to push, so to speak. I'll end the wife/Axe FX...
  78. Megahertzz

    Wish Stage mode display. Preset/current scene in large letters and full-screen strobe tuner

    But then I need a pad. Can it be connected without performance issues when playing?
  79. Megahertzz

    Wish Stage mode display. Preset/current scene in large letters and full-screen strobe tuner

    Alternately, the option of running gifs or jpegs on screen when you haven't touched the knobs for some time (20 - 30 seconds)
  80. Megahertzz

    Wish Stage mode display. Preset/current scene in large letters and full-screen strobe tuner

    As someone who looks at the display a lot when performing live, it would be nice to have some kind of stage mode available, where you could get just the preset and scene you're on in large writing on the display, and when you turn on the tuner, you'd get a full screen strobe tuner, like the...
  81. Megahertzz

    Implemented Any plans for a performance screen?

    A home screen with preset and current scene name in large letters on the display would be nice. Also, having a large strobe tuner using the entire display, like the Peterson Strobe Tuner app for your phone.
  82. Megahertzz

    700+ Naked Amps TonePack by AustinBuddy Available NOW!

    Just bought the pack. I'm hoping this will save me at the gig I'm playing next friday. I've been struggling like hell to get a good tone recently, everything just sounds boxed in and nasal.
  83. Megahertzz

    Volume global block and scene modifier issue

    Yeah, it's the level parameter in the volume block I want to change, when changing lead volume in multiple presets, but if it's not supposed to work that way, I'll have to try your suggestion. The scene modifiers ar at 100% in the scenes I use for leads. I know scene modifiers must be set at...
  84. Megahertzz

    Volume global block and scene modifier issue

    I guess I'll have to try that. But one should think the volume block was able to do such a basic task :/
  85. Megahertzz

    Volume global block and scene modifier issue

    I can try to grab some screenshots. What firmware are you on?
  86. Megahertzz

    Volume global block and scene modifier issue

    As I said above, the issue isn't with the scene parameters, it's with the level parameters in the volume block. I can change the value of the level parameter in the block, and save the preset, but the change doesn't appear in the linked blocks in my other presets. I am well aware that scene...
  87. Megahertzz

    Volume global block and scene modifier issue

    Honestly, I don't know how I can explain my problem any clearer. The issue isn't the modifier, it's applying the changes to the level parameter in a global volume block to all presets where the global volume block is present.
  88. Megahertzz

    Volume global block and scene modifier issue

    Yes, and if I change that range from 0 to 4 Db in a global block, and save the preset, it should also change on all linked blocks, right? The problem isn't that I can't change the parameter. The problem is that the changes don't apply to linked blocks when I save the preset.
  89. Megahertzz

    Volume global block and scene modifier issue

    No, the scene modifier only determines the value between the set level parameters in the volume block. For instance, if OFF value is 0 Db and ON value is 6Db, the scene controller can only adjust the level between 0 Db (rhythm volume, 0% on scene controller) and 6 Db (lead volume, 100% on scene...
  90. Megahertzz

    Volume global block and scene modifier issue

    The problem isn't with the scene parameters, it's with the volume block level that doesn't change across linked blocks.
  91. Megahertzz

    Volume global block and scene modifier issue

    Level parameter in the block was saved at 6 Db, and is at 6 Db when I load it into a preset. Scene modifier and expression pedal is also saved in the block. The scene modifier parameter obviously has to be programmed in each individual preset, depending on which scene I'm using for leads.
  92. Megahertzz

    Volume global block and scene modifier issue

    Yes, 100% sure. I even went over all the presets I'm using this weekend and reloaded the global block. Still not able to save level parameter changes to linked blocks.
  93. Megahertzz

    Volume global block and scene modifier issue

    It's more about the volume in the room than the tonal qualities of the room itself. Boosting 6 Db for leads at low volume makes a bigger difference than boosting 6 Db at high volume. At least that's how I perceive it. Sadly it doesn't, but I am strongly convinced it did in an earlier FW. I'm...
  94. Megahertzz

    Volume global block and scene modifier issue

    I have a global volume block that I use on all my presets, where the volume parameter is controlled by an expression pedal, and block level is used with a scene modifier for volume boost during leads. The thing is, and I'm fairly certain I could do this before, when I change the level...
Top Bottom