• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. Tahoebrian5

    Wish Ability to route spdif input to input 2

    If the hardware is setup for this it would be great to be able to have spdif input to input 2 i would like to be able to use the spdif in and out for outboard fx in my daw At the same time keeping my analog guitar path this way one could be recording guitar with one path on the grid, and have...
  2. Tahoebrian5

    Spdif input on axefx3?

    How do you tell the axe to use one of the input blocks for spdif? I see in setup, IO tab, you can setup spdif for an output block but seems it’s not the same for input. What am I missing? thx!
  3. Tahoebrian5

    iphone buying info (buy used from fleebay?)

    Well I think it is finally time. I have been milking my 6s for as long as possible. Anyway, looking at an 11 pro. Probably get one for the wife also so looking at two phones What can you guys tell me about unlocked vs locked? I don't even really know what that means. Also anyone have any...
  4. Tahoebrian5

    Jazz Rhythms... shuffle, bossa, swing, etc

    Anyone have a good resource for a video lesson with examples of different rhythms? Can’t seem to find much out there
  5. Tahoebrian5

    Piano iish tone? Amp with least intermodulation distortion?

    Anyone have suggestions for a starting point on trying to create a guitar patch that will give a somewhat piano vibe? Mostly for playing with classical/baroque stuff. Chopin, Bach, etc. The way notes ring together seems to be the main hurdle, we’ll other than the fact the guitar is not a...
  6. Tahoebrian5

    Anyone have a Discrete 8 synergy core? Question on how to send to a sub

    I'm hoping someone can point me int he right direction. I have my main monitors plugged into the rca monitor output but I want to run a separate mono mix for a sub. How would I go about this? Do I just use one side of the reamp output and pan everything to center on the reamp monitor panel? Also...
  7. Tahoebrian5

    Wish Multi band distortion

    With all the drive improvements, how about adding a multiband option?
  8. Tahoebrian5

    Ichika... just discovered.. so creative!

  9. Tahoebrian5

    Tax on buying used stuff on Reverb and Ebay

    Who else thinks this is complete BS? I’m talking about individuals selling 5 to 10 items a year. I agree any income reverb or eBay makes off the sale should be taxable but come on!! Someone already paid tax when the item was first bought. If you’re just swapping gear around and not making a...
  10. Tahoebrian5

    Recommend a used 5 string bass

    I’m starting my hunt for a used bass for recording purposes. Looking for good growly Metal tones (not extreme metal though) Anyone have any recommendations on what brands and models to look for. Ideally under $1000
  11. Tahoebrian5

    Where to buy a new Strat neck?

    Hey all, I’ve got an EJ strat I bought from reverb. Im not liking how short the frets are. Was considering having new frets installed. Thinking might be better to just buy a new neck that way I can get different radius while I’m at it. let me know where you guys recommend ordering from. On...
  12. Tahoebrian5

    What amp model has the most growl?

    I’m looking for an amp/cab combo that has a mean low end growl. I know a lot probly comes from the guitar but I’ll take what I can get. Playing a suhr modern in drop d and mostly power chord riffs. Looking to use it to add another guitar layer to my track to make it sound a bit meaner. So far...
  13. Tahoebrian5

    Reamping with Spdif

    Is it possible to record a di signal on left side of spdif, and amped sound on the right side? Any other ways that will work without having to do an analog connection to my interface for the di?
  14. Tahoebrian5

    Reamping / Tracking in Reaper

    Anyone have any thoughts on best practices while recording? I want to record my DI along with an amped tone so I can reamp if needed. One thought is to create a 4-channel track, one channel for Di, two for left n right fx, and the last of the four for dry amped. This way everything remains in...
  15. Tahoebrian5

    Best Modern Metal Mix for Reference?

    Looking for opinions on the best sounding modern metal mix. I am in the process of looking for some good reference tracks. I do like the Avenged sevenfold sound overall band sound, minus the screamo vocals though. Dream theatre is an obvious choice to listen too but I don't really care for the...
  16. Tahoebrian5

    Any superior drummer 3 gurus?

    I took the plunge and upgraded to SD3. So far very happy with the improvements. It’s like a whole daw inside of a plug in. very cool stuff. Quick question if anyone knows.. I want to try doing some dynamic eq (using fab filter) to help low freq masking between the kick drum and bass guitar...
  17. Tahoebrian5

    Great lesson on 6-4 chords

    Everything you need to know about the 6/4 chord! perfect pass time for quarantined musicians. https://tedgreene.com/images/lessons/baroque/TriadsIn2ndInversion_TedGreene_1975-01-11.pdf
  18. Tahoebrian5

    SPDIF output level?

    Sorry stupid question.. I can't find the spdif output control on the axe3. Anyone?
  19. Tahoebrian5

    Fc12 locking up and mini screens go blank but still backlit

    im on fw12.03 and last practice couldn’t get my fc12 to stop locking up. Rebooting the axe3 gets it working but within a few stomps it’s back to locked up. Does it across multiple presets and the specific button stomped doesn’t seem to matter. I did edit some layouts prior to getting the problem...
  20. Tahoebrian5

    Wish Dedicated Stutter/Glitch block

    Would be cool to cop some polyrhythmic stuttering effects. example
  21. Tahoebrian5

    Reference tracks or tone help for progish metal?

    I’m trying to get a rough mix together for some original prog / melodic metal songs. I’m realizing I have no idea really where to start as far as getting drums, bass, and guitar tones playing nicely together. Anyone care to share some isolated reference tracks, or a source for pointing me in...
  22. Tahoebrian5

    Small midi controller for finger drums?

    Anyone have any suggestions for a really small midi controller for tapping out beat ideas in reaper and EZdrummer? I’m thinking smaller the better.. like I really only new 4 pads , mostly for kick, snare, highhat.
  23. Tahoebrian5

    How to get more staccato note attack out of the arpeggiator?

    Anyone have any thoughts on note attack and duration? Someone smarter than me could probably use a gate or compressor but I’ve not had any luck so far.
  24. Tahoebrian5

    Can anyone help setting up the Axe-Fx 3 as outboard fx in Reaper?

    I can’t seem to get the signal routing figured out. I’m trying to use the axe3 as outboard fx and the send receive is ultra confusing.
  25. Tahoebrian5

    How to create a synth like sweep effect

    Anyone have any tips for me? Trying to use the filter block in band pass mode with freq tied to Lfo to create a sweeping effect. Problem is when it sweeps high into the airy sound, too much of the volume is lost like I need some amount of unfiltered signal. Anyway I’m probably going about it all...
  26. Tahoebrian5

    String dampers?

    What’s the best string damper to get? Ideally id like to be able to slide it behind the nut quickly when needed.
  27. Tahoebrian5

    Custom wiring concept

    Anyone ever consider wiring each pickup in an HH config guitar directly to the axefx? For example use a custom trs cable from the guitar that then splits into two inputs into the axefx. Then the neck and bridge signals could be processed or combined, morphed between, combined out of phase, etc...
  28. Tahoebrian5

    What are you studying currently?

    I’m probably not the norm, but I enjoy studying different musical topics probably more than actually playing. So what are you guys studying currently if anything? My latest discovery is the cycle of sixths (not fifths!) with secondary dominants and sub doms leading into each new key center. The...
  29. Tahoebrian5

    Need input, going to buy a Suhr modern or std, or Ibby AZ

    I have 5 guitars and just realized I don’t really love any of them so after much debate and countless hours on google I’ve narrowed it down to a Suhr or Ibanez AZ. Of course there is nowhere nearby to try any of these so I’m considering ordering 2 and returning my least fav. Does anyone have...
  30. Tahoebrian5

    Wish Auto tempo detection

    Is this possible? Would be super cool if you could set an upper and lower limit, and if it would sync the timing also to what you are playing. Set your delays to tempo detect and never have to tap tempo between songs. Maybe an input source selector so you could use a aux input from another source.
  31. Tahoebrian5

    What’s better than an Axe-Fx 3?

    3 AxeFX3’s !
  32. Tahoebrian5

    FS Ibanez J custom

    Public Service Announcement.. I have decided to discontinue the sale of this guitar for now. I am not deleting the thread due to not wanting to snuff the discussion below. After some research I am realizing I am not going to be able to get near as nice of an axe for what I can sell this for. So...
  33. Tahoebrian5

    PRS S2 standard, feedback anyone?

    Anyone out there own or played one of these guys? I’m GASing for a new Axe! https://www.prsguitars.com/index.php/electrics/model/s2_standard_22_2019
  34. Tahoebrian5

    Guitars with trems vs hardtail.. Tone/Snap/Clarity

    After nearly 30 years of playing I feel like I am finally getting to the point where I know what I want my tone to sound like.. and I am having a hard time getting the aggressive snap/pop and clarity with my Floyd Rose equipped guitars. I use the trem quite a bit though. Not just dive bombs, I...
  35. Tahoebrian5

    Need a refret on my Ibby Jem, suggestions?

    My frets are toast. I live in Reno, NV and don’t know of any good luthiers locally. The last time I took a guitar to a local guy was not impressed at all. Anyone have any suggestions of someone really good I can send the neck to? I really like the ball end fret treatment on my J custom and...
  36. Tahoebrian5

    Looking for some good midi beats to buy

    Can anyone recommend a midi pack for me? I am looking for a general assortment.. something big that will give me a large variety of basic rock and metal through to progressive metal type stuff. It seems like the couple packs I've bought only have a handful of actual beats and then just a bunch...
  37. Tahoebrian5

    FAS modern !

    Anyone try the FAS modern on FW5.05 +? It didn't really do anything for me previously but this amp is really good now. Check out factory preset 102 "Djentlemanly". Seriously kicking butt with my les paul.
  38. Tahoebrian5

    Wish Pitch follower enhancement

    It would be really cool if the pitch follower could track and output actual pitch. For example attach an enhanced pitch follower modifier to the center frequency of a filter block. The filter would then track accurately whatever pitch is being played similar to the capo/pitch block. Or maybe...
  39. Tahoebrian5

    Live sound, backline vs monitor vs both

    I’d been playing forever with a half stack backline so when I switched to the Axe with an FRFR box, I simply replaced my 4x12 with the frfr in backline position. It sounds great like that in the studio because we don’t use back facing monitor wedges like on a live stage. The thing I don’t gel...
  40. Tahoebrian5

    Some very creative heavy riffage

  41. Tahoebrian5

    Guthrie Aristocamp workshop

    Just stumbed across this. If it was near the west coast I’d consider going. Anyone here planning to go? https://www.aristocamp.com/
  42. Tahoebrian5

    How to get this Guthrie slap/mutron effect?

    Anyone want to take a stab at Guthrie’s effects/tone for the intro here?
  43. Tahoebrian5

    Any Josh Smith fans?

    I only recently discovered Josh Smith. One of the things I like most about his playing is it's relatively easy to hear how he is using advanced harmonic function ideas over blues progressions. It's almost like listening to a music lesson and every time I watch the link below I usually have to...
  44. Tahoebrian5

    Got a tone in my head, not sure how to get there

    How would you guys go about creating a clean stratty lead tone with sustain and compression similar to an overdriven lead tone? I want fast picking to pop almost like chicken picking but with more of a Gilmour tone balance.. I know, not sure if this is possible or even making sense. Anyway just...
  45. Tahoebrian5

    Mini LCD wish - bigger text or bold

    The LCDs are too small for my old eyes. I would gladly sacrifice some character count for bigger or even a bold text option.
  46. Tahoebrian5

    FS MFC mark iii w powered midi cable

    $400 shipped to contus This MFC is in great condition. I just looked it over and there is barely a scratch. There are two tiny little scratches on the front that are too small to photo and hard to see unless you are really close. Has not been gigged regularly.. maybe half a dozen shows. Usually...
  47. Tahoebrian5

    Newegg customer service rant (false advertising!!)

    Just a word of warning to you all, and also a good venting is needed. DO NOT BUY FROM NEWEGG IF YOU HAVE ANOTHER OPTION!!! I bought an ipad advertised as new, and I received a refurbished ipad. I thought maybe I messed up but checking back on the website there are still 2 listed AS NEW. On...
  48. Tahoebrian5

    Question about using left/right routing and outputs

    Is it possible to use the left and right outputs of a given out block (out1 or out2 etc) and have one side completely dry and one side with effects? Is this specific to which blocks are used earlier in the signal chain? In general I think I am confused about how to use the left/right routing of...
  49. Tahoebrian5

    Wish Phase-compare and adjust between blocks or rows at output

    This would be very helpful
  50. Tahoebrian5

    Wish LA2A "amp" block

    it would be really cool if we had an amp block matched to the LA2A to go along with the opto compressor. It is common opinion that the tube amp section of the LA2A is a big part of the magic. Maybe a Pultec amp model also!
  51. Tahoebrian5

    Wish Amp block: bypass preamp section

    We can defeat the power section by setting sag to zero. Would it be possible to do something similar to the preamp section? This could open up a huge amount of options. For example, run two amp blocks in series, defeat the power section in the first, then defeat the preamp in the second, now...
  52. Tahoebrian5

    Micro headphone amps, anyone?

    Anyone try one of these micro headphone amps? Seems cool for practicing on the couch while my wife is watching bad TV. https://www.voxamps.com/headphone
  53. Tahoebrian5

    MFC Issue - Cant change IA mode?? Help!

    Hey guys, I'm sure I am missing something but can't figure it out. I am trying to set the IA buttons up for general use to control scenes on my Axe3. When I go to MIDI>AxeFX Mode on the MFC to try to set the IA button mode to "none", the parameter selector buttons won't let me toggle over to...
  54. Tahoebrian5

    Best minor blues guitar work?

    Anyone have any specific songs or artists you can recommend? Looking to study up on my minor blues riffs and ideas. Also if you haven't discovered Josh Smith give him a listen. Really great for learning classic blues and cool harmonic ideas over 7 chords.
  55. Tahoebrian5

    Making custom MIDI cable for phantom power

    im planning to build myself a midi phantom power cable to go from the Axe3 to MFC101. Can someone verify I have the right idea? So I wire 9v AC to the number 6&7 pins, then clip the 2 pins (6&7) on the Axe side. Anything Im missing?
  56. Tahoebrian5

    Wish Audio wave form view before and after block

    it would be really cool if there was a waveform viewer function similar to DAW's. Would be helpful to see the shape of any clipping going on as well as latency across the block. Latency in reference to the input would be nice too for phase matching parallel signal paths.
  57. Tahoebrian5

    Heart 'Magic Man' - Can the Axe-Fx 3 pull it off?

    There are a ton of different tones going on with this song, and a couple keyboard parts. Im wondering if it's possible to pull this off live using a single preset. Calling @Moke .. If you are looking for a new song preset to add I will make this my official request. Anyone have any tips on...
  58. Tahoebrian5

    Fun with Delay+Filter+Controllers

    This is a work in progress but I can see good potential. The idea is to take delay repeats, run them through a band pass filter, control the center frequency with the envelope follower, and the Q with the Pitch follower. This is making for a really cool sound and is very expressive based on how...
  59. Tahoebrian5

    Analog mic pre into input 2 okay?

    I'm gearing up to record some vocals and don't have a dedicated interface. Will the XLR input 2 on the Axe3 work well coming out of an analog mic pre (golden age pre73)? Sorry this is probably a dumb question but I am a recording idiot.
  60. Tahoebrian5

    Axe fx vs pro studio gear?

    Anyone compare the axe fx's EQ's and compressors to classic studio gear? Pultec, Neve, UA, etc? Curious how it stacks up. Another thought is how it stacks up compared to DAW plugins?
  61. Tahoebrian5

    Online Backing track creation tool, anyone?

    Anyone have a link to a website or two that you can input some simple progressions and have something quick and dirty to practice over?
  62. Tahoebrian5

    Wish Graph editing for para EQ's

    it would be super cool if we could edit the parametric eq directly on the graph via displayed nodes for each band
  63. Tahoebrian5

    Recommend a midi keyboard

    I'm looking to get a medium to smallish size midi keyboard for use with FL Studio for recording writing (no live use planned). The Alesis stuff looks good as far as features but I don't want to get something that is low quality. It would be nice to have some velocity sensitive pads built in for...
  64. Tahoebrian5

    [solved] Scene increment problem

    I am trying to setup the scene increment feature using an external switch and the midi/remote menu. When I change the scene increment to pedal2, the AXE starts continuously switching between different scenes about 3 times per second. This happens whether or not an external switch is hooked up to...
  65. Tahoebrian5

    Wish Scene limits, and/or toggle between scene 1/2 and 3/4

    It would be very helpful if we could set the max number of scenes so when using the midi/remote menu for scene increment or decrement it could just switch between scenes 1 and 2, or 1,2,3. This would allow scene changes with a single remote switch, leaving the second rear panel expression port...
  66. Tahoebrian5

    Any BFD3 drum users here?

    ive recently been trying to use bfd3 to sequence some drum tracks and having some trouble. Not much action on the Fxpansion forum so thought I would try here. Basically I am having a problem where bfd3 repeats the first two counts of a measure. So in 4/4 instead of running through the beats...
  67. Tahoebrian5

    IR mic mixes

    Just curious if there are ir mixes out there that were mixed live and then captured as opposed to single mic captures that are then mixed after?
  68. Tahoebrian5

    Cool Chapmen stick video

    I’m late to the party finding this but it’s wirth sharing.
  69. Tahoebrian5

    Wish RTA block compare function

    is it possible to have a compare function on the RTA? This seems like it would be far more useful. In other words have the ability to route two different grid paths to it, and output the difference in freq response. You could put a looper block on side and record a sustained note or chord, then...
  70. Tahoebrian5

    TS808 Drive - A good tweak for crunchy rhythm tones

    I was playing around with the TS drive and comparing to the "Klon" settings using the FET drive and discovered a really nice setting. I started using the tube screamer type with the classic almost zero drive, and high level setting. This sounds great for leads but it's a bit too round for...
  71. Tahoebrian5

    Tone match .. funky results

    This is the first time I've tried to use the TM block on the 3. I'm using it at the start of the grid as a pickup/guitar tone match. I've done this with the 2 and worked effortlessly. So anyway, I input my local and reference signals, the results are sounding really funky but that could just be...
  72. Tahoebrian5

    TB5's Clean-Rhythm-Lead with one Exp Pedal

    Thought I would share my current preset I have setup. This has a clean, crunchy rhythm, and boosted lead with delay all controlled by a single expression pedal. Heel down is clean, mid-sweep is rhythm, toe down is lead. I am too lazy to setup my MFC so this is my solution until the FC's start...
  73. Tahoebrian5

    Wish Modifier for individual IR levels in Cab block

    I would love to be able to have a modifier roll on more of my V30 ir when playing leads or even higher notes. I like to mix a V30 ir with a Greenback ir for my rhythm but the V30 sounds thicker and is better for leads and high notes imo. I know there are other ways to get there but this would be...
  74. Tahoebrian5

    Wish More Tone Match blocks and/or Channels

    Can we have more instances of the TM and channels please? I like to use the TM block at the beginning of the chain to make my ibanez sound more like my les Paul. Ideally I would also have a TM of a strat for my clean sounds. Or more cab blocks would be helpful.
  75. Tahoebrian5

    Fixed Copy amp channel not working

    Not sure if this is a known issue currently. In axe edit, when I choose copy channel A to B, most of the settings do not get copied.
  76. Tahoebrian5

    Setting the Axe3 up with my DAW question

    Hey guys, complete recording newbie here. Im trying to learn the best way to setup the 3 with my computer. I am able to get tracks into my daw (fl studio) over USB. But when I choose the axe3 as the audio device mMy DAW I then cannot play back audio over my computer monitors. Is there anyway to...
  77. Tahoebrian5

    Progressive Metal drum loops, good source?

    Anyone know a good source for free progressive style metal drum loops, or have some feedback on a purchase? I’m looking for odd time sig, poly rhythm stuff , (tool, dream theatre, etc)
  78. Tahoebrian5

    Any FL Studio users here?

    I’m attempting to learn FL Studio and wondering if anyone on the forum here is a user? I’m having a very difficult time finding good tutorial videos. I think this must be the DAW of choice for a lot of... non traditional types of music. Anyway I’m really just looking for a point in the direction...
  79. Tahoebrian5

    Modifier max/min values

    For some reason I can’t edit these parameters in Axe edit and they appear greets out. they work as expected on the front panel though.
  80. Tahoebrian5

    Wish More control over modifier curve

    it would be really helpful if there were more data points available then just start, mid, and end. Also an option to straight line interpolate between points instead of a curve would be nice.
  81. Tahoebrian5

    Best way to crossfade one grid row to another?

    I’m trying to setup a preset that cross fades from my Marshall setup to my fender setup using an exp pedal. Currently I have each amp/cab setup on their own row, then the rows feed into a mixer block that goes to an output block. It kind of works but the curve of the modifiers is not very...
  82. Tahoebrian5

    First time building a computer.

    After waffling for months I finally went ahead and ordered all the parts for a new computer. Of course I've never built one myself but how hard can it be, right? Well after reading through all the options and bios settings on the motherboard I'm starting to wonder if I'm in a bit over my head...
  83. Tahoebrian5

    What is a good way to record from the Axe3 onto an ipad?

    I'm looking for an easy way to record some some tracks out of the Axe3 using Auria on Ipad. Can I use the usb out on the 3 somehow? Do I just need a special cord or something like a lightning connector?
  84. Tahoebrian5

    Real cab + FR cab

    I'm thinking about trying out a hybrid monitoring system for BP and live use. I've been rocking an ASM12 for a while now and it sounds great at BP, also sounded great at sound check at my last couple shows. For some reason about 1/2 through my last few live shows though it seems to sound really...
  85. Tahoebrian5

    Les Paul, tuning peg options

    hey guys, I'm thinking about getting some after market Tuning pegs for my LP. I really want something that is a bit more precise / geared slower, maybe locking, and doesn't look out of place on a vintage looking LP. Anyone have some suggestions?
  86. Tahoebrian5

    Auto Engage Problem, AGAIN!

    So I've had problems on and off with auto engage doing funky things (wah not going off, not turning on, etc) and I've chalked it up to faulty cables but it has recently come back and I don't believe it is cables at this point because I have replaced them several times. Could this be a problem...
  87. Tahoebrian5

    Copy blocks between presets?

    i know this will be a non issue when Axe edit comes out, but in the mean time is it possible to use fractal bot or some other method to copy blocks from one axe3 preset to another axe3 preset?
  88. Tahoebrian5

    Copy paste channels between presets

    The manual states this is not possible with the front panel. Hopefully it will be available in the new axe edit. Anyone have any tips on how to, for example, get channel a from one preset to copy to channel b in a second preset? I'm trying to compile a few of my favorite sounds from the factory...
  89. Tahoebrian5

    2 amp blocks on the grid, lower resolution?

    Just a clarification please if you know. Will running 2 amps at once lower the resolution? If so, will having only one active at a time run in normal resolution?
  90. Tahoebrian5

    my III arrived today

    I've only had time to run through some of the factory presets so far. All I can say is the sound quality improvement is very noticeable. It's far more noticeable than any firmware/epiphany upgrade I've experienced on the 2 over the last few years. The feel especially is amazing.. just to be...
  91. Tahoebrian5

    Anyone using the Axe for live vocal fx?

    I'm curious to hear if anyone is doing this and how they are routing things? I've come across some older threads but nothing recent. We only play with a couple different sound guys so not too worried about having to interface with random FOH systems and engineers. Currently our singers are using...
  92. Tahoebrian5

    Implemented Eq in wah block

    Or ability to auto engage a eq block so it goes on and off with the wah. With all the extra time you guys have on hand should be a simple matter :)
  93. Tahoebrian5

    Wish More scenes

    We need way more than 8 scenes! Now that we can fit more blocks in why limit us to 8 scenes? Also this would be a big help while the foot pedal is still not available. Instead of having to setup a bunch of IA's just program more scenes It would also be great to have scene sets X and Y or...
  94. Tahoebrian5

    Controlling a 3 with the MFC via XL+

    I’m very close to ordering a 3 and am trying to figure out how best to get it setup for a show n about 3 weeks. I’m not big on buying a phantom power new cable for the mfc so I’m thinking how I could possibly just keep the mfc hooked to the XL+, then control the 3 with a midi cable from the XL...
  95. Tahoebrian5

    New cab block question

    Hey guys, does the new cab block have hi and low cuts for each IR or just one master?
  96. Tahoebrian5

    Any bass players rocking a III yet?

    Just wondering how the Ares bass models are treating people? Would love to hear some feedback.
  97. Tahoebrian5

    Point me to your fav plexi / greenback patch

    I’m redoing some of my patches and looking for a classic plexi with greenback patch (rock to 80’s metal). I’ve heard some great samples recently but now that I’m looking for them having trouble finding them. Anyway if you have any favorites post up a link please. Thx!
  98. Tahoebrian5

    Wish Compare phase between rows

    Would it be possible / useful to have a tool to compare phase delays between rows? I like to run two or more rows and morph between them with an exp pedal but I recently stopped doing this because it sounds phasey when it’s mid morph. I know I could dump a signal compare in a daw and adjust it...
  99. Tahoebrian5

    Can you tune a PA with a 31 band and iPhone?

    Just wondering if you guys can give me some tips on how to tune a PA to kill feedback freqs. In the studio we don’t have a bunch of fancy gear, just a basic mackie board, but we do have a 31 band that could be used. Can someone school me on whether or not I could use maybe an iPhone app to find...
  100. Tahoebrian5

    Good source for cliche riffs? Jazz and Blues

    I'm looking to brush up on recognizable cliche riffs in jazz and blues. Of course I am far too lazy to listen for them and transcribe them myself because this is the internet and all things are possible right? Anyway post up some links if anyone has a good site or youtube channel.
Top Bottom