• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. S

    Axe-Fx III wait list: Let us know when you get notified...

    Received my invitation and purchased my AX FX on July12th. Unit is suppose to arrive on Friday the 20th.
  2. S

    Axe-Fx II "Quantum" Rev 7.02 Firmware Release

    Does this gain meter show up on the AXE edit or just the AX FX screen only? If this meter is suppose to show up on the AXE Edit on my computer, where is this screen located?
  3. S

    MMGT16 + RAC12 + XL + 2 Matrix amps + 4 4x12s. I'm in heaven ( a loud heaven).

    Finally figured out what was wrong! The RAC12 gets a command from the Ax FX II at start up. If the Ax Fx isn't on or still cycling when the RAC12 request that command, the RAC12 remains in a type of stand by mode until power is shut off and turn back on or a command for reset is sent from a...
  4. S

    MMGT16 + RAC12 + XL + 2 Matrix amps + 4 4x12s. I'm in heaven ( a loud heaven).

    I have a similar setup to yours. I have the mastermind gt 22 instead of the gt16 and recently purchased a RAC12 for my Ax Fx ll. I've been having a problems with the RAC12 locking up not changing presets after I power down my rack or unplug and re plug in the mastermind. Is your RAC12 the...
  5. S

    Questions about Latency

    I purchased Cab Lab 3 and finally got it to work. At first I was getting the word querying next to the box the green check mark was suppose to appear in. That word went away when I loaded the driver. My question now is concerning the Cab Lab Standalone version and latency. Is there an ajustment...
  6. S

    Ax Fx ll vs Matrix Power Amp vowlume

    I've always placed my power amp volume above my Ax fx volume but never exceeding one half volume on either unit.
  7. S

    Ax Fx ll vs Matrix Power Amp vowlume

    Ax Fx ll vs Matrix Power Amp volume Which gives a better tone? The Ax Fx MV turned up all the way or the Matrix power amp cranked full volume adjusting the Ax Fx volume to taste. I'm looking for a general idea of what creates a great tone.
  8. S

    Axe-Fx II Firmware 17.00 Released

    Shift presence switch incon not appearing I downloaded firmware 17 which seem to have transfered fine. But I notice the icon for the shift presence switch under the Presence knob for the USA amps isn't there on both my Ax fx II and Ax editor. What I found to be strange is this icon did appear...
  9. S

    Axe-Fx II fw 17 Released

    Problem with the shift Presence switch in the USA amps I downloaded firmware 17 to my AX FX II in which all seem to transfer just fine. But attempting to use the shift Presence switch in the USA amps, the icon switch doesn't show under the "Presence knob as per the instructions. The weird...
  10. S

    Setting

    Atleast I know I'm not loosing it! I tried all kinds of adjustments thinking I may have turn off someting. I was kind of hoping I did. But I guess in the back of my mind I knew better. I think I even read somewhere only the pedal made for the AX FX, would control this unit completely
  11. S

    Setting

    I own an AX II and I'm using a Mastermind GT as a foot controller.With my AX editor hooked up to the mastermind GT and AF II for a brief moment was showing effects on and off stutus on the editor screen of my computer. I have no idea if I distrubed a setting or just what. But the editor now...
  12. S

    Upcoming Axe-Fx II Streaming Class

    BINGO!!!!!!!!! :D Thank you to everybody that directed me to try a different browser. My purchase went thru with no problem. I can now download the "Streaming Class I've been trying to get
  13. S

    Upcoming Axe-Fx II Streaming Class

    I'm obivously not going to the right place to purchase this "Streaming class" So lets start over. What site must I go to first?
  14. S

    Upcoming Axe-Fx II Streaming Class

    Can someone walk me thru the steps? Still not working
  15. S

    Upcoming Axe-Fx II Streaming Class

    No luck purchasing this class yet When I go to that class page and attempt to put in the necessary info for purchase it never goes thru. The classes remain grayed out except the teaser. Help somebody!
  16. S

    Upcoming Axe-Fx II Streaming Class

    Trying to buy all fourteen class I've watch the free one Where do I need to go to locate buying the entire class. I've been going around in circles after I enter all necessary info including my credit card on the page that shows the buy class. For some reason I can't find a send "enter" or...
  17. S

    Upcoming Axe-Fx II Streaming Class

    Are all fourteen classes available now or are ther more coming in the future? Only one of the fourteen classes are showing available on my computer. But I maybe missing something
  18. S

    Upcoming Axe-Fx II Streaming Class

    I maybe posting this in the wrong place and if so some one please point me in the right direction. I wanting to purchase the "Streaming Classes. Is the forty nine dollars the amount for all the classes or just one? Are all classes now available? So far I only see one the rest show grayed out on...
  19. S

    CabLab for Ultrarez

    Thank you for the info on loading the new IRs. By any chance does anyone know if Red wirez IRs will load using these same two vehicles, Fractal Bolt or Axe Edit?
  20. S

    CabLab for Ultrarez

    New IR's in sent with Firmware 13 I'm new on the subjsect of loading and tweaking IRs, but really want to get on board with learning all the ins and outs. I downloaded firmware 13 and noticed that it came with updated IRs. Whats do I need to do with these to be able to hear them? When I place...
  21. S

    Axe-Fx II Firmware Version 12.04 Public Beta

    Guess I need more education and understanding on this tube subject
  22. S

    Axe-Fx II Firmware Version 12.04 Public Beta

    With all the tube types it seems like we would hear something
  23. S

    Axe-Fx II Firmware Version 12.04 Public Beta

    So by change changing tube types with an amp and cab block only, there probably won't be a noticeable differance?
  24. S

    Axe-Fx II Firmware Version 12.04 Public Beta

    The entire idea behind my post was I was just expecting to hear a change of some kind. Not so much of a certain type
  25. S

    Axe-Fx II Firmware Version 12.04 Public Beta

    Well this help me know number my Ax Fx is broken. But I would like to hear these changes some of the other Ax users are hearing
  26. S

    Axe-Fx II Firmware Version 12.04 Public Beta

    Hearing the different tube types Hopefully some one can shed some additional light on this tube issue I'm having or think I'm having. When I used the editor or the dials on the face of the AX II, changing the tubes in any amp I don't hear any change at all. Although I see the tube types...
  27. S

    Axe-Fx II Firmware Version 12.04 Public Beta

    Tubes I loaded the AX FX 4beta that added the ablity to use dfferent tube types with any amp. When I switch to these different tube types, should there be a drastic tone change in the Amp? I've used both the editor and change the settings in the ax Fx and don't seem to notice any differance in...
  28. S

    FW 12.02 Released

    I downloaded firmware 12.02 without any problems!!!! Sytems sound good as ever:-).
  29. S

    FW 12.02 Released

    I guess I will also take the plunge and downloand 12.02 when I get home. Up until now all of my downloads have had no issues.
  30. S

    FW 12.02 Released

    Is this latest firware 12.02 safe? there has been few forums written stating problems during downloading. I keep up with all the updates but this one has me a little nervous.
  31. S

    Announcing Cab-Lab!

    Has Cal lab been released yet?
  32. S

    Firmware Version 10.12 Now Available

    Ok, Not using the axe editor will eliminate the problems with the editor, but where do I find the Smoothed control for the wah and the tilt slope filter?
  33. S

    Firmware Version 10.12 Now Available

    I've update to the lastest firmware 10.12 and have several questions. Hopefully someone will have answers. The description page that describes whats new, mentioned " numerous enhancements to support Axe-edit 3.0". Has this editor been released already? Where do I find the Tilt EQ slope filter...
Top Bottom