• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. bluesk165

    IN [POST] = Balanced Cable.............

    Thanks for your information !!!
  2. bluesk165

    IN [POST] = Balanced Cable.............

    Every time you help not only me also everybody. I recently bought an Orange rocker 32 combo amp, which is a STEREO Amp so I'm very confused about matching it with the FX8. Thanks a lot.
  3. bluesk165

    IN [POST] = Balanced Cable.............

    Hi, Users The cable used for the IN [POST] of the FX8 is labeled balanced, does this mean TRS on both the FX8 and the amplifier side? Thanks a lot !!!!
  4. bluesk165

    About "block library" on FX8-Edit

    Thanks for your detailed answer !!!
  5. bluesk165

    About "block library" on FX8-Edit

    HI, FX8 friends, If I use EDIT to save a drive block named "My drive", then the "My drive" block automatically load when I load a preset that contains this block? However, the name does not appear in the block library at the bottom left of FX-8 Edit. Thanks
  6. bluesk165

    I have started WET/DRY and have many question

    Hi, F friends, Just tried a Wet/Dry setup with 2 amps and the Black Star Studio 40 with 4CM and Fender Deluxe with a humbuster cable from the Right pre out FX8 for Dry. Now, it works very well but still there are so many question as following, 1. For post effects, setting parallel? or serial...
  7. bluesk165

    TRS Cable for IN [POST] L/R

    Thanks a lot every time.
  8. bluesk165

    TRS Cable for IN [POST] L/R

    Hi, Friends? I hope to make wet / dry rig recently. And have a question for I/O on FX8 manual as following, ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ  IN [POST] L/R – (Balanced 1/4” Tip-Ring-Sleeve Jacks) Connect the FX LOOP SEND of your amplifier (or the output of your separate preamp) here...
  9. bluesk165

    4CM and the cables

    Anyway thanks a lot.
  10. bluesk165

    4CM and the cables

    #4 One more thing, What is that mean "BALANCED" at under IN POST?
  11. bluesk165

    4CM and the cables

    Thanks a lot.
  12. bluesk165

    4CM and the cables

    fx8 Friends How are you? I want to do 4CM using my own multi-cable. Is it correct to connect like the attached picture? Of course, TRS-TS cable is a Humbuster.
  13. bluesk165

    Preset master Volume

    I see, I'm not not much different than others. Thanks a lot !!!
  14. bluesk165

    Preset master Volume

    I mean "True bypass" Right Middle, Foot Switch.
  15. bluesk165

    Preset master Volume

    Howare you, users? I've been using FX8 for quite a while, but I think I know only about 20%. I made a preset yesterday and suddenly got a question. When I creating a preset, make sure that the volume difference between the preset and bypass does not become too large. By doing so, I cannot raise...
  16. bluesk165

    How to change MIDI program in this case

    Thanks it will help!!!!!
  17. bluesk165

    How to change MIDI program in this case

    I recently purchased an amplifier head called BluGuitar Amp1 100W. However, a part of the its manual for setting the preset is as follows. -------------------------------------- Every available switching possibility on AMP1™ can be recalled via MIDI programm change commands, when the...
  18. bluesk165

    Hi, Friens? I am a Korean and name is Kim. I recently purchased BluGuitar amp1. But I want to...

    Hi, Friens? I am a Korean and name is Kim. I recently purchased BluGuitar amp1. But I want to use four channels of AMP1 with FX8. Could you tell me how to use it? I do not know Midi well. So I would like you to give a detailed explanation. Thank you. bluesk165@gmail.com
  19. bluesk165

    I want to hear your opinion

    I have owned FX8 and hope to buy Matrix VB800 or Fryette PS II. But I don't have any exprience for them and I heard some problem with Fryette PS II + FX8. What should I do? I'm usually use FX8 4CM.
  20. bluesk165

    Stievie ray Vaughan sound....

    Hi, Fractalers Somebody has Stievie ray Vaughan preset? I use 4cm with Pevey classic 30 and fender standard 83. Thanks foword.
  21. bluesk165

    I got a "Message time out" from FX8

    Thanks a lot
  22. bluesk165

    I got a "Message time out" from FX8

    Hi, Fractallers I just got a message "Message time out" from FX8 for several times when I was trying to receive all bank and all preset. How can I solve this problem? Fractal-Bot : very recently ver. FX8 FW : 5.04
  23. bluesk165

    About Scene ...

    This is solved !!!
  24. bluesk165

    About Scene ...

    Hi, fractalers, If I open one of preset in a bank, it comes S2. But I want to open it with S1. If I move it to another empty bank, it has same action open S2. What should I do? Thanks.
  25. bluesk165

    Question about momentum switch

    Yes, you are right "momentary" Thanks.
  26. bluesk165

    Question about momentum switch

    Wow! Thanks a lot, it have solved.
  27. bluesk165

    Question about momentum switch

    Hi, fractalors, for example, one of my preset <p1> has <p8> switch to go <preset 8> as a momentum function. Of course, <p1> and <p8> in a same bank. then I foot this p8 switch during playing, it works well but it can’t go back to <p1>. How do I set this <p8> switch?
  28. bluesk165

    Fractal bot doesn't work....

    I have clean fractal bot and after install a new ver but the situation is same. I have to turn off FX8 during the same screen with the picture what I load over.
  29. bluesk165

    Fractal bot doesn't work....

    This is 1hour situation. What is going on? and what should I do? ** but fractal Bot has wrote 171217-000143-system.syx only. can not write 171217-All-Banks.syx.
  30. bluesk165

    Fractal bot doesn't work....

    with receive all presets to save on my computer after upgrade latest ver. What should I do ?
  31. bluesk165

    Whay wah block always turn on?

    There is no useful PC Reset ON, OFF.
  32. bluesk165

    Whay wah block always turn on?

    Why wah block always turn on?
  33. bluesk165

    Whay wah block always turn on?

    Hi, Fx friends? I have FX8 MARK I for 3 years. I set a wah block in a preset and after play it then turn off FX8. Then I turn on after 1minute, 1hour or 1day .... what ever the wah block "turn on" already. So I press the wah block button 1 time, it nor order but I press 2~4 times then...
  34. bluesk165

    Using Pitch block...

    Can I use only 1 pitch block with X/Y in a preset? I hope to use custom scale 1-6 to 3 of scene in a preset. But if I assign scale X=1, Y=2 in a scene and then go next scene, I can't assign 3....... Is it impossible? Thanks
  35. bluesk165

    Anyone purchase a B-Stock unit?

    Me too ! Can't find what is the problem.
  36. bluesk165

    How can I set the fuzz face for best clean up

    I'm using 4CM with Peavey classic 30 amp. I hope to set up a lig for fuzz face from clean to dirty with guitar Volume. Pls let me know how. Thanks
  37. bluesk165

    Where do I put wah block in my preset?

    Thanks, Everybody !!!
  38. bluesk165

    Where do I put wah block in my preset?

    Hi, musicians I hope to know where do I put wah block in a preset. I usually use signal chain as following, 4CM/ pre 4/ post 4 Comp - Drive 1 - Drive 2 - PHR - CHO - DLY - REV Also, at real pedal board, I knew that Fuzz should go first of chain. What should I do in FX8 with wah and...
  39. bluesk165

    FX8 V3.50 Released

    Thanks again. I didn't think Min/Max parameter knob has "On/Off". I just thought that it has only number even all the way down or up. NOW I understand how to use "Control footswitchs". Also thanks for Controller demo preset. I have to leaving my office today to workout with this. Thanks...
  40. bluesk165

    FX8 V3.50 Released

    Wow ! your explanation, Clear best !!! I have tried as following your reply already. It is not only more light weight(?) for CPU than changing whole Scene to change only drive amount also it has fast action than X/Y switching. That is my understanding for Control Switch Footswitchs even if...
  41. bluesk165

    FX8 V3.50 Released

    These are all awesome ! I have a question, what is the different Control Switch Footswitch and Scene?
  42. bluesk165

    How do I get this tone?

    I hope somebody help me to make this tone. I use fender stat and Pevey Classic 30 old with 4CM. I have try out to make this tone but too much crunch? rustle? crinkle? even near the sound. This tone has very clean over high note not like mine. * Pls understand me It's very hard to express...
  43. bluesk165

    Think about grade up to MARK I, MARK II, MARK III.........

    I have owned FX8 around 6 months from this year and it is awesome same as the FX-II XL. Then I have use my FX8 only 6 months after FX8 Mark II released so I have to think about the grade up method. Of course FAS is not a philanthropic organization but following a profit. But I think its too...
  44. bluesk165

    About drive block EQ

    Thanks for your detail answer it must be helpful not only to me also everybody. I have some more questions as following, You said "The Tone should react the same way the tone control would on a given pedal. It has a set "upper and lower frequency" and the knob allows you to sweep that...
  45. bluesk165

    Advice of drive block?

    Awesome!!!
  46. bluesk165

    About drive block EQ

    I know this is stupid question but I hope to know it. Drive block has many virtual knob but I use them even don't know detail what is what. Tone : ? Hz control Bass : ? Hz control Treble : ? Hz control Low Cut : Cut below setting Hz? High Cut : Cut over setting Hz? Thanks
  47. bluesk165

    Advice of drive block?

    Not after Drive block?
  48. bluesk165

    Which drive block has the best reaction to picking strength?

    This way, I am trying with parallel drives. Thanks.
  49. bluesk165

    Which drive block has the best reaction to picking strength?

    Thanks for all suggestion......
  50. bluesk165

    Editing Scenes

    This Videos COOOOOL !!
  51. bluesk165

    What does parallel drives mean?

    Wow! this is awesome !!!! May I have this preset? Thanks a lot.
  52. bluesk165

    What does parallel drives mean?

    Thanks so much for this answer, and also thanks to your patience for my broken English. Anyway, I have found parallel chain with 2 drives has powerful sound. Thanks a lot anytime.
  53. bluesk165

    What does parallel drives mean?

    No, there is no problem. Just I have to know reducing the parameter at the same time. Thanks a lot.
  54. bluesk165

    What does parallel drives mean?

    Thanks so much detail answer. There is no problem with parallel drives except confusing with "Drive and Level" parameters doesn't work like single drive. Drives looks like series on FS even connect parallel on CFG. Is there any different point between set up slot 1 : Drive 1, slot 2: drive...
  55. bluesk165

    What does parallel drives mean?

    I set up 2 drives with parallel in 4CM, and I like its powerful sound. But I feel hard to set the parameter specially "Drive" and " Level". Pls explain signal flow of parallel drives. Thanks.
  56. bluesk165

    Which drive block has the best reaction to picking strength?

    Hi, Musicians At, first, It's very sorry for my English. I'm looking for best drive block which has best reaction to picking strength and its parameters setting. I just hope drive quantity to follow my picking strength such as the stronger picking strength, the more drive quantity. I use...
  57. bluesk165

    Input Levels for humbucker and single coil

    Thanks for all answer. I'll make presets per guitar. - about 60 songs.......
  58. bluesk165

    Input Levels for humbucker and single coil

    Hi, friends I have 2 kinds of guitars such as ES-335 and Fender strat. I have set up all preset with strat and then I use 335, it's too much the INPUT Levels. How can I control the Input Levels of all preset at once for both of 2 guitars? ** Hope, this question is clear.....
  59. bluesk165

    Can I copy X to Y with Front pannel?

    Thanks everybody !
  60. bluesk165

    Can I copy X to Y with Front pannel?

    I hope to copy X to Y without Axe Edit.
  61. bluesk165

    Scene Revert doesn't work on FX8 EDIT

    Thanks a lot, it's very clear !!!
  62. bluesk165

    Scene Revert doesn't work on FX8 EDIT

    Hi, friends I have up grade with 3.01 and "Refresh after new FW" on FX8 EDIT. And I setup scene revert "on" at GLOBAL >> I/O >> MIDI. Then, the Scene Revert doesn't work on FX8 EDIT but works well with FX8 UNIT. (of course I use Communication Pause button ) What am I supposed to do?
  63. bluesk165

    Can I reduce volume pedal range ?

    Hi, friends I use EV-1 expression pedal now and it works very well anytime. At my gigs, sometime the volume range is too wide to control on stage. I set it up at SETUP >> I/O >> PEDAL but the MIN to MAX range is too wide with o.99 to 1.00. So I want to make volume range (ex) 0.50 to 0.99...
  64. bluesk165

    Is a shimmer reverb possible?

    Me too!
  65. bluesk165

    How to set engage only 1 block with tap TEMPO?

    According to this way, for example to PHA, I have changed Modifier parameter(source) to LFO1 but the movement moving not like Phaser. Would you please like to explain more detail with PHA? ex) TRM - PHA- DLY - REV L........... I want to affect tap Tempo to PHA only.
  66. bluesk165

    How to set engage only 1 block with tap TEMPO?

    Sorry for my broken English but I want the tap tempo to only affect the tempo setting on one effect.
  67. bluesk165

    How to set engage only 1 block with tap TEMPO?

    I think No. 1 will do. Thanks.
  68. bluesk165

    How to set engage only 1 block with tap TEMPO?

    Sorry, I make you confused. It's mean "work or not work" one of effects.
  69. bluesk165

    How to set engage only 1 block with tap TEMPO?

    Hi ? Teachers, If I have blocks like FLA / PHA / DELAY in the rig. In this case, how can I set up to engage only one of 3 blocks with tap TEMPO switch ? Thanks.
  70. bluesk165

    Running FX8 in scene mode w/ instant access

    Thank you, now I got it.
  71. bluesk165

    Running FX8 in scene mode w/ instant access

    How can I set this? How can I set this?
  72. bluesk165

    Help me with Metronome.....

    It's very sorry I have made many idiot question here. I have one more question about Metronome. I use a preset as following for example, And TEMP page is as following, Here my question. Pls express to me the function of ver nob on TEMP page unlike Manual. * If I press tab for...
  73. bluesk165

    It's very sorry question again FX Loop

    I have found this. And I could make the PRE/POST set correctly but still remain the problem Volume pedal works only OUT 1(PRE). Thanks a lot.
  74. bluesk165

    It's very sorry question again FX Loop

    Yes, I understand what is but I can't understand when I set PRE/POS 4/4, its not work TRM block.
  75. bluesk165

    It's very sorry question again FX Loop

    It's very sorry this question repeat. I have tried connect my AER60 amp and FX8 but it's failed with AER60s FXLoop. Volume pedal works as following picture. This is my pedal set up. Volume pedal works only IN 1 and OUT 1. IN 2/ OUT 2 are not work. Then if I change IN 2 or OUT 2, volume...
  76. bluesk165

    Can I erase recorded by Looper

    Yes ! Thank you for your info. It works very well with OUT POST. But if I increase the LEVEL on LOOPER screen, DRV block LEVEL increase too. Also, if I stop LOOPER and go back to FS screen, the DRV LEVEL still can't come back. So, the DRV LEVEL and Volume are not mach. Is it normal...
  77. bluesk165

    Can I erase recorded by Looper

    Thanks a lot. I want to exercise with clean chords sound by looper but If I recording clean sound and then play it the clean chords sound has DRV sound with. How can I exercise with DRV sound on clean chords sound where I recorded to looper? Hope, above is clear. Thanks !
  78. bluesk165

    Can I erase recorded by Looper

    Hi, Friends ! I have recorded with Looper but I can't not erase or delete perfectly. How do I delete recorded sound by Looper? Thanks !!!!
  79. bluesk165

    FX8 with JCM 2000 TSL COMBO

    Wow !! Thanks a lot for all answers.
  80. bluesk165

    FX8 with JCM 2000 TSL COMBO

    Hi, everybody. I have a gig next weekend and I heard that there is the JCM 2000 TSL COMBO. So I check user's manual for it but couldn't find manual except handbook. Somebody said about FX Loop as following, "............. send and return jacks, and loop level switches for each of the two...
  81. bluesk165

    How do I increase attack to envelope...?

    Thanks a lot.
  82. bluesk165

    How do I increase attack to envelope...?

    Yes, the "scale parameter" is the answer. Thanks.
  83. bluesk165

    How do I increase attack to envelope...?

    Hi, everybody? I actually hope to use auto- wah with controller of WAH Block. All connection and sound out well, but the moving black square on Modifier Screen can't go over about 60% even it was set MIN 0 to MAX 10. So the wah sound is too week. How can I make black square point go to...
  84. bluesk165

    How to set expression pedal for Wah or Volume?

    Thank you very much ! I have to study "MODIFIER" more.
  85. bluesk165

    How to set expression pedal for Wah or Volume?

    Thank you so much !!!!
  86. bluesk165

    How to set expression pedal for Wah or Volume?

    Hi, I hope to use a EV-1 pedal for wah or Volume in a preset. If a preset has a wah block, I hope to use EV-1 for wah and preset has no wah block, hope to set EV-1 for Volume. Pls let me know how do I set for this? EV-1 pedal has too big it's swing for wah, so I hope to set it small swing...
  87. bluesk165

    How to delete a PRESET?

    Thanks a lot.
  88. bluesk165

    How to delete a PRESET?

    There is no answer user's manual the way to erase "a PRESET". How I do that? Thanks.
  89. bluesk165

    Help me with AER Compact 60 amp

    Wow ! O.K I should follow you or never use this amp for FX8. Thanks a lot !!
  90. bluesk165

    Help me with AER Compact 60 amp

    Hello ! My AER 60 and FX8 didn't match with their FX Loop. IN 2 (POST) VOLUME PEDAL 2 is not work. * In this case, intensity of internal effect can operate with EV-1. - Not Volume. OUT 1 (PRE) VOLUME PEDAL 2 is Work. * In this case, intensity of internal effect can not operate with...
  91. bluesk165

    Fx8 Road Cases?

    It's awesome !!! May I know this case's dimension ?
  92. bluesk165

    Deleted Block appears on CFG

    Thanks a lot !!
  93. bluesk165

    Deleted Block appears on CFG

    I have seen your video all, wow it's awsome !!!! better 10000 times than manual. Thanks.
  94. bluesk165

    Deleted Block appears on CFG

    Thanks for your video. One more question, Can I move a block to another location in a scene? ex : a block in 3 slot >> 6 slot (same preset, same scene)
  95. bluesk165

    Deleted Block appears on CFG

    Hello! I have red Manual 10 times more but I don't know what happen with this. I have deleted one block of a preset as following, then I hit PAGE to go CFG, the DRV remain as following, What is wrong with me? Thanks.
  96. bluesk165

    Help me with AER Compact 60 amp

    Yeb, I have double, triple checked I/O settings. Pedal still don't works on IN 2 (POST) VOLUME. Thanks !!!
  97. bluesk165

    Help me with AER Compact 60 amp

    Thanks for your reply. LCD Screen said 4/4 as following, and this case, EV-1 is not work. Then this case, it works well instead of slightly changing the sound as following, Thanks a lot!!!.
  98. bluesk165

    Help me with AER Compact 60 amp

    Guitar >> In Pre >> Out Pre L to input on AER >> In Post L to the send on the AER Out Post L to the return on the AER and use EV-1 on pedal 2 ** I did just like GuitarmanUK and its sound O.K but volume pedal(EV-1) is not work on IN 2 (POST) VOLUME. Volume pedal works only OUT 1(PRE) VOLUME...
  99. bluesk165

    Can't find out GLOBAL MIX parameter ....

    Thank you so much !!!!
Top Bottom