• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. ATR1

    Good One For The New Guys Here

    Go through this thread there are several cool blks. files you can put into the FX8 and check out. https://forum.fractalaudio.com/threads/mamas-back-again-ae-3-x-the-mother-of-all-pedal-and-effect-emulations-thread.79617/
  2. ATR1

    FX8 USER NEEDING blk. FILES FOR DUFFY PRESET

    Hey guys building a Cult-ish preset and looking for some ideas. Since there is very limited FX8 presets I come to you AXE-FX users for assistance. Researching Duffy, looks like he runs everything pre. and chorus thru his JC120 panned left/right cleans. Looking for Delays,Flanges, Pitch, Chorus...
  3. ATR1

    Torpedo Captor?

    Has anyone used this with there FX-8 & amps? Good, Bad Ugly? http://www.two-notes.com/en/torpedo-captor
  4. ATR1

    What happened to our preset exchange? ^^^^^^

    Title says it all... Never mind you move it from sticky?
  5. ATR1

    WAH BLKS NOT OPENING?

    Can someone with a FX8 see if you can open theses blocks from AXE thread? Not working for me. Thx Tony.. https://forum.fractalaudio.com/threads/wah-suggestions.106123/page-2
  6. ATR1

    FULLTONE- WAHFULL TROWER TONE NEEDED.

    I need a little help getting this tone for my Trower Preset FX8. Go to 2:00 mark. I have a wah block how would I set this up for adjusting the throw of the pedal without using the pedal? Modifier maybe? Thx..
  7. ATR1

    TROWER PEDAL BOARD 1980.. YIKES!

    Cliff, Robin really needs a Fractal unit back then. Go to 2:12 mark. 5ft board..o_O
  8. ATR1

    UPSET PRESET UNITY GAIN

    I cleared an old preset P2 and now the preset lost its unity gain with no blocks. When using the True Bypass and toggling between ALL, PRE, POST, I am noticing when PRE is bypassed volume drops considerably. (I believe the Loop Section is active). What is the right way to clear a preset and not...
  9. ATR1

    PRESET MD SOLO QUESTION

    I see in the Mark Day Solo Preset pitch block there are modifiers attached. Can some explain what they are doing? Appears to be nothing. Thx.
  10. ATR1

    Reverb Problem FW3.6

    Having issues with reverb again. FW3.60/FX8-Edit1.4.2..Getting the red circle with !. The preset is only using 68%?
  11. ATR1

    Wish LEVELING METERS ON FX8 EDIT PAGE

    Ability to see the level meters from unit on FX8 EDIT for balancing presets volume etc.
  12. ATR1

    Jerry Cantrell of Alice In Chains Rig Video Bio: MARK DAY

    Mark is Jerry running both amps in stereo? MAD & PISSED? Sounds like he is or was combining both tones live. Thx
  13. ATR1

    Wish RELAYS LOCATED ON PRESET EEFECT PAGE (FX8 EDIT)

    I fired up my laptop I have not used in a while over the weekend and connected to my FX8. I noticed on the effects page of edit it has 2 relays to the right of page for easy access. Hoping to see this come back if possible.
  14. ATR1

    Switching channels on amp problem.

    FYI- If you have a relay block in FX8 unit you must delete block to use scene switching FX8-Edit. Yesterday I had a problem with one of amps not switching in scene mode in an older preset I had. I use to place a relay block in the unit to switch channels. It took me awhile but I figured it out...
  15. ATR1

    Stereo Rigs- Real Amps

    I posted this in the FX8 forum but not getting any tread so I should of posted her. I pulled the trigger and bought another amp this week to make a stereo rig. I now have (2) MB Mark V 90w Combos in stereo with my FX8. Anything I need to watch out for? I was using the KOKO Boost to push the...
  16. ATR1

    STEREO RIGS--HOW ARE YOU USING THEM?

    I pulled the trigger and bought another amp this week to make a stereo rig. I now have (2) MB Mark V 90w Combos in stereo with my FX8. Anything I need to watch out for? I was using the KOKO Boost to push the front of amp and would like to push both is this possible with (1) KB? Also are you guys...
  17. ATR1

    Wish 2-PITCH BLOCKS/1 Preset

    The ability to add 2 PITCH BLOCKS to a preset:worried:. I would like to get a 12 string guitar semi kind of sound using 2 pitch blocks in parallel.. A very talented guy here says he uses (2) and sounds fantastic.. EDIT: Even if I would have to sacrifice most of the other blocks in that preset...
  18. ATR1

    Wish Ability to pull out effects blocks on Axe FX Patches

    Not sure if this has been asked. How about being able to pull out just the effects blocks in patches for AXE FX through the FX8 edit. Or at the minimum ability to download AXE FX edit and see patches so we can pullout the effect setting manually.
  19. ATR1

    Wish FX8 BIG BROTHER

    Since it is just wishing I would like a bigger unit with more switches and more cpu. I get the small footprint thing but I find myself needing a couple more switches. How about a full AXE FX II in a floor unit instead of a rack unit? Just a thought..
  20. ATR1

    Uploading Presets

    I am have issues trying to upload a preset. I keep getting "There was a problem uploading your file". Can anyone help? Thx
  21. ATR1

    Creating new preset volume help.

    I created a new preset from scratch, added blocks, setup pedals. I have low to no volume. When I go to the setup then utility page, then status tab to check my levels they are all about 15-20%? The 1L input level is about 75-80% the 2L & 2R are about 15%, output levels the same. I checked all...
  22. ATR1

    VOLUME PEDAL PLACEMENT PROBLEM

    Setting up new preset. Chain is all serial 5 blocks pre/4post. I cannot seam to get my volume pedal to work. Only when I switch to 2 pre/6 post does my volume pedal work whats wrong? In I/O control page I have pedal 2 set in all 4 volume ports still nothing? Still not working? Need help.
  23. ATR1

    Wes Hauch- Seymour Duncan Dimebucker Set Demo

    Did Wes leave us any setting for the Dimebag Tone he was using on his FX8?
  24. ATR1

    FW 3.0

    Just finished installing FW3.0. I watched video, wrote down all my setting from FW2.0. Backup 2.0. I went through and reset my settings as they were, calibrated my 2 pedals(I think). I cannot get any sound 4CM set 4pre/4post. When I move my amp placement to past block 5 I have sound or use my...
  25. ATR1

    MB MARK V 90w GUYS

    I am really missing my Mute switch since removing my MB foot switcher. Is there a way to use a relay to make my amp mute? Instead of switching channels maybe mute? I am using my volume pedal or my polytuner to mute everything, but I still get bleeding hum through my amp probably post. When I...
  26. ATR1

    EV1 WAH SETTINGS

    Is there a way to make EV1 turn off wah instantly. When I bring toe up the wah takes a second to turn off. I want the pedal turn off instantly when I bring toe up. Can someone walk me through the settings? Thx.
  27. ATR1

    EV-1 AS WAH SETTINGS

    Is there a way to make EV1 turn off wah instantly. When I bring toe up the wah takes a second to turn off. I want the pedal turn off instantly when I bring toe up. Thx.
  28. ATR1

    LOST EFFECTS IN MY LOOP

    Messing with setting trying to get my volume pedal to work turned something off on effect loop post in & out. Anyone help? 4CM Solved.. Delete
  29. ATR1

    HOW TO SETUP EV-1 AS A VOLUME PEDAL?

    I received my 2nd EV-1 pedal with TRS cable and cannot figure out how to set it? I calibrated it. I went into the I/O and tried to place it with no success. When I hit learn it does not see 2nd pedal. if I hit learn it will see 1st pedal? Basic I know. Also I cannot get the on board tuner to...
  30. ATR1

    MB MARK V 90w USERS NEED HELP!

    I am struggling to get a good channel #2 rhythm tone. (Mark V Combo channel 2/Eq preset around 2-3 on clock face) Can someone give me a setting for a drive or OD that works well in a live band situation or even setting on amp? I am thinking more on the line of classic rock on the heavy side...
  31. ATR1

    NEW FX8 INTRO VIDEO !

    Just found this on youtube from Carter https://www.youtube.com/watch?v=-GvOzCSuK_I AWESOME! this is a great start! thank you1
  32. ATR1

    Wish FX8 EDUCATIONAL VIDEOS

    We need tweaking videos for each of the effects for FX8 WITH LIVE AMP. More detail with all the different knobs on what they do. Even basic stuff like connections, setup of parameters.. Thx...:encouragement: UPDATE............................... Just found this on youtube from Carter...
  33. ATR1

    PRESET SOUNDS LIKE CLIPPING BUT NOT!

    :?Last night at practice my preset sounds like it is clipping but no lights are flashing. I have attached my settings for preset. the gain on the GTE is pegged when I play and in picture I am not even playing it is at 7/8 full. Lacks sustain also. Any ideas? Thx..
  34. ATR1

    FACTORY PRESETS

    Hello I have been messing with some of the presets and liking the Mark Day BE tone with my MB Mark V at the moment. I notice it does not have much sustain can anyone guide me on how to improve the sustain in that preset? Also looking for a Neil Schon tone setting if anyone have one. I play a...
  35. ATR1

    COPYING A PRESET?

    Is it possible to copy a preset and paste it to a different blank preset? ex.Take preset L1 and copy it to M1. I like some of the presets but I want to tweak them and rename them but keep the originals as they are. If so please tell me how. Thx
  36. ATR1

    FX8 EDUCATIONAL VIDEOS

    Hello , I just received my FX8 late Friday. I have been watching AXE FX videos on youtube to kinda get familiar with the device. Will you be releasing any video for FX8 explaining setup, building presets/scenes, tweaking effects, ect. soon? Thx ATR
  37. ATR1

    FX8 with MESA BOOGIE MARK V 90w

    For you guys using Mark V 90w what are you using to switch channels through FX8? RJM SENT ME THIS "For that configuration, I'd recommend the Mini Amp Gizmo and Mark V interface cable. With those, you can set up a different channel on the Mark V for the first 256 presets on the FX8. The...
Top Bottom