• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results

  1. jcfiallos

    Input EQ on amps

    Hi fractal friends, which would be a good value for the amps input eq?, good setting advice needed for low cut and hi cut, so 80 - 8750 would be a good value ?
  2. jcfiallos

    Axe-Fx III Firmware 10.00 Public Beta #2

    Thanks a lot!, I agree Burgs has amazing setups on his amps
  3. jcfiallos

    Axe-Fx III Firmware 10.00 Public Beta #2

    It’s related to the new improved power section..... see?
  4. jcfiallos

    Axe-Fx III Firmware 10.00 Public Beta #2

    Hi folks which would be a good setting for a clean fender amp tube sound, MV location of power amp in pre-pi or post-pi?, apparently pre pi is softer and smoother sounding
  5. jcfiallos

    Axe-Fx III Firmware 10.0 Public Beta

    sorry my mistake typo I meant FW 10, 😬
  6. jcfiallos

    Axe-Fx III Firmware 10.0 Public Beta

    I already tried 10 and its insane sounding already, can´t wait for the final release to give it a shot! , I think dirt and a bit of ghost notes is always good for having even more real sound on amps
  7. jcfiallos

    Axe-Fx III Firmware 10.0 Public Beta

    to be honest, I just tried the the FW and its sound amazing!, no issues here whatsoever, clean amps sound very nice
  8. jcfiallos

    Axe-Fx III Firmware Version 6.03

    SUPERB update, no issues whatsoever, sounding SWEET and SMOOTH.........
  9. jcfiallos

    Axe-Fx III Firmware Version 6.02, Axe-Edit 1.01.09 and FC Firmware 1.08

    Yes I saved the filter block sorry for the confusion, loaded again and same problem
  10. jcfiallos

    Axe-Fx III Firmware Version 6.02, Axe-Edit 1.01.09 and FC Firmware 1.08

    I erased the filter cab, and the same problem, unit froze on 7, ribbon not scrolling axe edit not working neither fractal bot, made emergency boot back to 6.01 which works fine
  11. jcfiallos

    Axe-Fx III Firmware Version 6.02, Axe-Edit 1.01.09 and FC Firmware 1.08

    ok wait just saved them first, will erase them all just now
  12. jcfiallos

    Axe-Fx III Firmware Version 6.02, Axe-Edit 1.01.09 and FC Firmware 1.08

    the problem is that I have that same filter block in many presets.... it would be the same tough
  13. jcfiallos

    Axe-Fx III Firmware Version 6.02, Axe-Edit 1.01.09 and FC Firmware 1.08

    ok i'll try that and report back, BTW, can this filter block be improved in the next FW?, I will be needing that for sure....
  14. jcfiallos

    Axe-Fx III Firmware Version 6.02, Axe-Edit 1.01.09 and FC Firmware 1.08

    This is the preset, before a couple of update it sounded fine, now it is not doing the auto wah thing, everything else works good, see the -filter cab-
  15. jcfiallos

    Axe-Fx III Firmware Version 6.02, Axe-Edit 1.01.09 and FC Firmware 1.08

    I also noticed the filter block sound completely changed on the last couple of updates..... I have to changed it to work as it was before soundwise/sounds different
  16. jcfiallos

    Axe-Fx III Firmware Version 6.02, Axe-Edit 1.01.09 and FC Firmware 1.08

    yes one preset has the filter block, for example it is on preset 5, with filter, so it won't scroll past 4, it maybe that filter thing the issue its an auto wah on filter
  17. jcfiallos

    Axe-Fx III Firmware Version 6.02, Axe-Edit 1.01.09 and FC Firmware 1.08

    Hi Chris, no I dont think its a filter issue, its like, you are in preset 1 and axe edit does not obey any preset change orders, afterwards, on 6.02 fractal bot wont work either, it says communication time out, if you scroll with the unit using the ribbon scroll it wont work either......, if you...
  18. jcfiallos

    Axe-Fx III Firmware Version 6.02, Axe-Edit 1.01.09 and FC Firmware 1.08

    ok reporting back, I made again the emergency recovery boot and installed FW 6.02 again, and had the same communication issues, it would not connect to axe edit even when it had the latest FW, and did not scroll past position of preset 4. fractal bot did not perform well either. I made a second...
  19. jcfiallos

    Axe-Fx III Firmware Version 6.02, Axe-Edit 1.01.09 and FC Firmware 1.08

    anyone having the same communication issues? or is it just me?
  20. jcfiallos

    Axe-Fx III Firmware Version 6.02, Axe-Edit 1.01.09 and FC Firmware 1.08

    It does not communicate well with the Axe fx 3, does not change presets
  21. jcfiallos

    Axe-Fx III Firmware Version 6.02, Axe-Edit 1.01.09 and FC Firmware 1.08

    Im having some communication time out issues with the Axe edit new update, when changing presets it wont change at all Axe edit was unable to complete the following communication request: change preset
  22. jcfiallos

    Axe-Fx III Firmware Version 6.00 Public Beta

    ok I reverted back now to 5.09, sorry for the anger and frustration, thanks for the help!
  23. jcfiallos

    Axe-Fx III Firmware Version 6.00 Public Beta

    hahaha thanks for the encouragements
  24. jcfiallos

    Axe-Fx III Firmware Version 6.00 Public Beta

    Fractal bot does not recognize the unit now, not that easy.....
  25. jcfiallos

    Axe-Fx III Firmware Version 6.00 Public Beta

    Yes terrible.... does that means all my presets gone?, I did install the axe edit firmware, ita not about axe edit,
  26. jcfiallos

    Axe-Fx III Firmware Version 6.00 Public Beta

    anyone knows how to resolve this issue?, very frustrating......
  27. jcfiallos

    Axe-Fx III Firmware Version 6.00 Public Beta

    does that includes the unit not rebooting???, if that is a beta I will never try one again in my life! Jesus Christ!
  28. jcfiallos

    Axe-Fx III Firmware Version 6.00 Public Beta

    first problems with a grey screen after installing that firmware crap!!!..... In a brand new unit and with Fractals flagship model, totally annoying and disturbing!
  29. jcfiallos

    Axe-Fx III Firmware Version 5.00 Beta #2

    ok, I solved my problem, I set the per preset override to "NONE", this way the setup of the FC6 affects globally all presets, and not to each individual presets changing
  30. jcfiallos

    Axe-Fx III Firmware Version 5.00 Beta #2

    how can I copy my layouts to other presets or all presets?
  31. jcfiallos

    Axe-Fx III Firmware Version 5.00 Beta #2

    I think I erased the default layouts, and created my own, maybe that was the issue
  32. jcfiallos

    Axe-Fx III Firmware Version 5.00 Beta #2

    I already fixed this, It was a per preset over ride. Sorry for bothering
  33. jcfiallos

    Axe-Fx III Firmware Version 5.00 Beta #2

    I am using a microphone XLR cable (Mogami) BTW
  34. jcfiallos

    Axe-Fx III Firmware Version 5.00 Beta #2

    I am getting serious problems with the FC-6 not loading presets, sometimes they load , sometimes they don't, there are some spots, that never load and the screen gets blank, I have to access through the axe edit tp a new preset spot.....
  35. jcfiallos

    Axe-Fx III Firmware Version 5.00 Beta #2

    Hi Chris, I just got my FC-6 a couple of days, and just tried it with the 5b2, would not know for sure, in the Scenes layout, BTW, I have 2 knobs for preset up/down ( and bank up/down with hold function), when I get to -lets say preset 12, it wont go further on than than spot and the FC-6 screen...
  36. jcfiallos

    Axe-Fx III Firmware Version 5.00 Beta #2

    Hi There, been tested the 5 b2, in the FC-6 it wont let me select certain presets. For example the FC-6 when it encounters preset 12, 13, 14,16 it gets blank and wont scroll on to more presets (neither up or down). Other times when I navigate with the Axe edit to higher presets and come down it...
  37. jcfiallos

    Axe-Fx III Firmware Version 3.00

    Thanks!, now with the axe edit update its showing
  38. jcfiallos

    Axe-Fx III Firmware Version 3.00

    Hi regarding "Added “EQ Off / On” control to Amp block. This modifiable parameter turns the graphic EQ on and off.", I did not find this feature in the amp by itself, but in the drive block there is an On and Off button for turning the eq , but not in the Amp block per se. Am I getting something...
  39. jcfiallos

    Axe-Fx III Firmware Version 2.01

    Triple Yo!!!! (amazed)
  40. jcfiallos

    REAL MIC vs IMPULSE RESPONSE

    I liked more clip A, it sounds more natural to me ears...
  41. jcfiallos

    Arch top Jazz Tone

    yes it would be great if you could share the preset basically to learn how to tweak accordingly for archtop jazz tone use the Tube Pre
  42. jcfiallos

    KURT ROSENWINKEL PRESET WANTED :)

    Thanks a lot Matt! It would be a great contribution to the community
  43. jcfiallos

    Axe-Fx II "Quantum" Rev 7.02 Firmware Release

    I cant find the PWR DYN page on the Axe edit, do you think that the FW update for the Axe fx II, is the same as previous beta one?, I cant seem to find the changes indicated, I have installed twice the FQ update now.
  44. jcfiallos

    Axe-Fx II "Quantum" Rev 7.02 Firmware Release

    Hi, I tried to find the motor drive button on the amp block but cant find it, I can locate it in the cab block, but not in the amp block, any HELP?
  45. jcfiallos

    AX8 V7.01 Public Beta

    No FW beta for Axe fx II yet? :(:sweat:
  46. jcfiallos

    Axe-Fx II "Quantum" Rev 7.00 Firmware Release

    Thanks a lot Clifford!!!!!! Amazing Company!
  47. jcfiallos

    Any chance in modeling a Polytone amp, for jazz?

    Hi Cliff et al, is there any chance is modeling a great Polytone amp suitable for us jazzers?, it would be a great input for the jazz guitar playing community! best JC
  48. jcfiallos

    Axe-Fx II "Quantum" Rev 7.00 Public Beta #2

    Flowers Blomming!!!!!! thanks a lot Cliffhanger
  49. jcfiallos

    Axe-Fx II "Quantum" Rev 7.00 Public Beta

    So when will the new firmware come out??
  50. jcfiallos

    Hi Gorilla, I ordered the rebot rom chip from fractal it fixes that stuff, contact them on...

    Hi Gorilla, I ordered the rebot rom chip from fractal it fixes that stuff, contact them on support, they will explain its an easy fix
  51. jcfiallos

    I have a Tube Preamp, where should I put it?

    I tried it infront of the Axe, it sounded pretty cool, I am also trying to find ways to make the Axe sound even more tubish, I guess the direction its taking is in that same path
  52. jcfiallos

    I have a Tube Preamp, where should I put it?

    Hi Stratoblaster, thanks" could you elaborate more pls?, you mean in the drive block putting a tube pre?, or you mean in amp 1 looking for tube preamp and the puttin a EF86 in there?. I normally use T808 OD at zero in the drive block
  53. jcfiallos

    I have a Tube Preamp, where should I put it?

    thanks a lot Stratoblaster, Ill give it a try!, thanks to all!
  54. jcfiallos

    I have a Tube Preamp, where should I put it?

    I have a telefunken preamp its only 1 tube the EF804 with one transformer with very efficient performance, it basically improves the sound of any amp, its a class A preamp. I use it normally in front of any amplifier and it improves the sound, I am curious on how would this work, for a mire...
  55. jcfiallos

    I have a Tube Preamp, where should I put it?

    Hahahaha common! there is no C) option..... lol
  56. jcfiallos

    I have a Tube Preamp, where should I put it?

    Hi friends, I have a EFb04 tube preamp made by Doug Roccaforte, Its a great tube preamp, If I decide to use it together with my Axe fx II, should I put it before the axe or after? a) GuItar ------>tube preamp ------->Axe fx II ----------> jbl 712 FRFR speaker b) Guitar ---------> Axe fx...
  57. jcfiallos

    Won't backup with fractal bot past 5% of Bank C

    Hi Soc9, I actually erased about 4 presets around location 6 of bank C, and same thing persists.....
  58. jcfiallos

    Won't backup with fractal bot past 5% of Bank C

    Thanks, is there a way of spotting or knowing which might be the corrupt preset?, maybe where it normally stops the back up process?
  59. jcfiallos

    Won't backup with fractal bot past 5% of Bank C

    Thanks a lot, I did not know that I will definitely give it a try, thanks for the tip! much appreciated!
  60. jcfiallos

    Won't backup with fractal bot past 5% of Bank C

    thanks TG3K, much appreciated, what I did, upon reading your post, is that I backed up first bank A, B, system settings and cabs, it went down good. And later on I backed up only bank C that was the one giving problems, It backed everything now fine, I did it by parts!. thanks a lot everyone for...
  61. jcfiallos

    Won't backup with fractal bot past 5% of Bank C

    Hi TG3K, exactly it fails on Bank C when i tell the fractal bot to back up all of the banks, It backs weel bank A and B, but stops at 5% of bank C.
  62. jcfiallos

    Won't backup with fractal bot past 5% of Bank C

    yes, bank A and B load without any problems, its only bank C when it reaches 5%
  63. jcfiallos

    Won't backup with fractal bot past 5% of Bank C

    it gets only to 5% of bank C and a time out message appears...
  64. jcfiallos

    Won't backup with fractal bot past 5% of Bank C

    I replaced the cab supposedly and location of 5% of banck C, and same thing, it does not progress beyond 5% of bank C
  65. jcfiallos

    Won't backup with fractal bot past 5% of Bank C

    you think maybe a cab might be corrupt?, if I place myself on 5% of bank C it points out F091 and F092, of factory cabs,
  66. jcfiallos

    Won't backup with fractal bot past 5% of Bank C

    thanks MrGuitarabuse I will try that, but its a lot of work backing up an entire bank!
  67. jcfiallos

    To Cliff, from a MKII user: Thank You!

    thanks a lot Cliff for your efforts and support, and keeping the flame Alive!!!
  68. jcfiallos

    Won't backup with fractal bot past 5% of Bank C

    Hi!, I am trying to backup my presets, but cant finish past 5% of banck C, how can I solve this? thanks in advance for any help
  69. jcfiallos

    Axe-Fx II "Quantum" Rev 6.00 Public Beta

    Hi Cliff!, reporting back, I downloaded Q6 again, and its working as a charm now....... gain sounds are Georgeous!, I downloaded the Q6 update and installed again, I notice the knob of the firmware update (latest, Q;Q4; Q3 etc..) is now gone (right of preamp). DId you updated again?, its...
  70. jcfiallos

    Axe-Fx II "Quantum" Rev 6.00 Public Beta

    Thanks a lot cliff for your response!, I think having Q6 for clean tube sounds on fender plus Q5.03 for lead gain tones would make the perfect update!, don't get me wrong here, I respect much your work, however I feel the new Q6 in the gain sounds have less gain, it sounds more bassy with less...
  71. jcfiallos

    Axe-Fx II "Quantum" Rev 6.00 Public Beta

    Thanks a lot sebastos08
  72. jcfiallos

    Axe-Fx II "Quantum" Rev 6.00 Public Beta

    Should it be related to the new sylvania 12AX7A tube?, on cleans it sounds impressive, but on gain sounds its more honky, which preamp tube was default on 5.03? 7025 maybe?
  73. jcfiallos

    Axe-Fx II "Quantum" Rev 6.00 Public Beta

    Hi there, I tried the new Q6 for Axe fx ii mk2. the fender clean tone are outstanding really close to tube amps, but on gain tones, I feel the sound more honky and boxy wtih an added bass frequency land less frequency spread. Is it just me? should I adjust something I am not getting?
  74. jcfiallos

    Axe-Fx II "Quantum" Rev 6.00 Firmware Released

    thanks a lot Cliff of Dover!!! you rock man!
  75. jcfiallos

    What MkI & MkII users would leave behind to stay in the game

    Why loose when you can have it all?, a good point would be to sell your mk2 and move on....
  76. jcfiallos

    Its Hard to Say Good bye, MK II Users :(`

    Hi Cliff, thanks for everything, is there a change to keep the flame alive? you rock man! ;)
  77. jcfiallos

    Axe-Fx II "Quantum" Rev 6.00 Public Beta

    Hi Cliff, JC here, Im a MK II user, thanks for creating a great product!, sorry to say goodbye to Fractal Audio, Im much satisfied so far, in my heart there is only Gratitude. thanks buddy!
  78. jcfiallos

    forum addict

    forum addict
  79. jcfiallos

    Chef's Sitar

    niche one Chef, lets taste the Curry now.....
  80. jcfiallos

    Axe-Fx II "Quantum" Rev 2.01 Firmware Release

    Blood on the Floor
  81. jcfiallos

    Axe-Fx II "Quantum" Rev 2.01 Firmware Release

    WTF!!!! impressive update. sounds TOO GOOD I want it to stay here forever...... I am starting to feel sorry for the competition
  82. jcfiallos

    KURT ROSENWINKEL PRESET WANTED :)

    That would be pretty cool, and if possible get a preset for this Guys sounds, its impressive!
  83. jcfiallos

    Problem with update, Hi last night I updated to Q2 and my axe fx II mk 2 has frozen, all lights...

    Problem with update, Hi last night I updated to Q2 and my axe fx II mk 2 has frozen, all lights are on an its not working, any help!
  84. jcfiallos

    KURT ROSENWINKEL PRESET WANTED :)

    Hi I am looking for a modern jazz sound a la Kurt Rosenwinkel sound, any one has been able to nail it right?. difficult sound by the way. delay settings are a bit difficult, thanks in advance
  85. jcfiallos

    Fractal Bot quit unexpectedly again and again

    Hi I am having the same problem, I installed last fractal bot software, and no when I am trying to backup y presets, when it reaches 97%, it stops, and says that it timed out, how do I fix this? do I have to reset system parameters?, will it erase my presets? can someone help?
  86. jcfiallos

    Better TRACKING needed on GR 300 and synth sounds

    Hi Cliff, I hope someday you might read this, anyway..... there are a lot of FAS users out there like me, who play fusion and jazz sounds. and use synth sounds too. Is there a possibility of improving the tracking capacbilities of the Axe fx II? in order to track better the synth sounds ala...
Top Bottom