• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Search results for query: fcb*

  1. chris

    Need Help setting up my JP6 Piezo

    it's 1am for me, but if you can go to my server in the next few minutes i can help you out. should be pretty quick. https://discord.com/invite/6hsATmBJyE
  2. H

    Need Help setting up my JP6 Piezo

    Hi guys ! I recently bought a FCB1010 and programmed it to change presets/scenes etc... Now here's my problem --> I would like to have a scene with lead sound and another scene only for piezo so that when i want lead i just press 1 on my FCB1010 and when i want piezo just press 2 (and...
  3. podling9

    FM3 with other midi controllers

    Yes, that's correct. Because of all of the things (i.e. scenes, presets, expression control & effects) immediately available via the eureka I haven't had a need to have any other info going the other way.
  4. TheloniusJ

    FM3 with other midi controllers

    Thanks for the reply. I guess I was just talking about the MIDI cables, not the audio path, but I think you answered it. Basically, MIDI signals go from FCB to FM3, but no MIDI signal is going from FM3 to FCB. Correct?
  5. podling9

    FM3 with other midi controllers

    Sorry for the delay in replying. I have guitar cable in to FM3, GR55 into the returns, L & R outs to mixer for recording and L & R outs to two Katanas (power amp inputs). I'm not sure if that's the one cable method or not. With the Eureka loaded FCB I just go from the midi out of the FCB to the...
  6. TheloniusJ

    FM3 with other midi controllers

    So I've been thinking of dusting mine off again. I used it with my Elevenrack and was happy with it. I goofed around a bit after I got my FM3, but it seemed like the out of the box Eureka ePROM stuff didn't seem to work right (I don't remember the details). One question: it looks like you can...
  7. podling9

    FM3 with other midi controllers

    I posted this back in Feb. Hope it helps. Hello folks, I'm a new convert to the FM3 (from helix floor) and, for my needs, it provides everything and then some. I also had a FCB1010 that I've had for many years, but haven't used because I could never master the programming. I tried connecting it...
  8. danielworks

    Behringher fcb1010 : can't program expression pedal A

    I did it, i think there was a conflict with old settings since I bought it used yesterday. Problem solved after resetting FCB and Axe fx, thanks !
  9. ConstantM

    Behringher fcb1010 : can't program expression pedal A

    the fcb1010 saves the expression pedal cc numbers for each preset so you need to have the preset you want to use selected and then enter edit mode and do what the video says. also make sure there is no conflict with the selected cc and if it is used by something else on the axe fx try selecting...
  10. danielworks

    Behringher fcb1010 : can't program expression pedal A

    I followed carefully this tutorial but I am only getting to make it work the pedal B. When I press "Learn" on FX3 midi/remote menu, only pedal B is assigned ti CC#14. My pedal A is working, cause it can be checked while calibrating them. What am I doing wrong ?
  11. 5

    DL4 looper functionality

    Record. Stop. Play. Using assigned scene controllers.
  12. Ugly Bunny

    DL4 looper functionality

    Which function, exactly, are you having issues with? Every other answer is a resounding "yes," including from my own experience with the FCB1010 (although not sure how I'd do half-speed/reverse with same switch, but everything else would work just fine).
  13. R

    Ground Control pro setup

    Hi FM3 firmware 5.02, Ground Control Pro VER1.14, H9MAX V5.9.1 MacBook Pro I want to use a Ground Control Pro to run FM3 and Eventide H9. Also Behringer FCB1010 Eureka Prom to do same job. New to midi, struggling with CC and PC. Ground Control Pro set to 4 Presets / Bank with Instant Access...
  14. T

    FM3 with FBC1010

    I didn't really understand what to set for the CC - the FCB demanded two settings (Num + Val) whereas the FM3 manual only states I need to use CC "3" in order to switch to bank 3. So I set the CC as "03" and the second value "127", since I wasn't sure what the FCB wanted there :). As CS pointed...
  15. T

    FM3 with FBC1010

    Behold, it was indeed a user-error (as it is most of the times). I contacted CS to see if this is really a software issue and Mark came back to me incredibly quickly pointing me towards a working setup. In order to change banks, the CC should be set up as Num = 0 and Val = 03, and the PC should...
  16. podling9

    FM3 with FBC1010

    I posted this back in Feb. Hope it helps. Hello folks, I'm a new convert to the FM3 (from helix floor) and, for my needs, it provides everything and then some. I also had a FCB1010 that I've had for many years, but haven't used because I could never master the programming. I tried connecting...
  17. T

    FM3 with FBC1010

    Thx for the input - and also thanks a lot for the videos on YouTube you did on the FCB! They're very helpful! I checked what the FCB is actually sending by monitoring the signals on my computer. I think the FCB works correctly by sending PC value 21 and CC#3 value 127; would the order in which...
  18. Ugly Bunny

    FM3 with FBC1010

    As good as I got with the FCB1010, I never figured out how to make it correctly select any presets beyond the first bank. IT was definitely a bug with the Axe Fx, as selecting banks didn't work and I don't know if they ever fixed this. I got an FC6 as soon as they were available so I haven't...
  19. T

    FM3 with FBC1010

    I am currently trying to set up my FCB1010 to work with the FM3, however, I can't seem to select specific presets. My FM3 presets start from 405 - so I'd like footswitch 00/1 on the fcb to address this preset. According to the reference table of the FM3 I need to send CC#3 + PC 21 to jump to...
  20. Matt payne

    Axe-Fx III Firmware Release Version 19.06 Public Beta

    I have almost the same configuration and can confirm it's relatively easy and works well. I also change all tempo, presets, volumes, wah via Midi to USB, I just have in parallel a FCB1010 in midi IN to change manually presets or volume. Works well with bitwig but tried also at home with cubase...
  21. vika12

    FM3 to FM9: Any Regrets?

    Love the Bad Horsie - it's the wah I use with my amp. Works well in front of the FM3 too. :)
  22. TheloniusJ

    FM3 to FM9: Any Regrets?

    I've definitely considered this since 80% of what I do with my one expression is a wah pedal. I have a Bad Horsie sitting around collection dust so could easily go that route. The set up I like (I've done this with my ElevenRack and actually with my Katana) is have two expression pedals with...
  23. Ugly Bunny

    Behringer FCB1010?

    Haha, well, i used to have a Pedaltrain Terra42 with two H9s, two of the big strymon pedals, 2 fuzz face minis, a timmy, wah, volume, Mark V remote, and about 7 or 8 other drive, chorus, and delay pedals. I HAD to reference which lights were on lol!! I miss that thing; but holy hell was it...
  24. Piing

    Behringer FCB1010?

    Kind of like when you're playing on-stage with a classic pedal-board. You do not rely on watching the pedal LED to know if it is engaged or not (if the stage light is red you won't even see it) but you normally know which effects you have turned on or off at each time. I have been gigging with...
  25. ConstantM

    MeloAudio Midi Commander

    the fcb as a device is very flexible and easy to use. the switches are reasonably good quality (i have had mine for many years with absolutely no problem apart from the occasional need for expression calibration). its only problem is the difficulty to program. if it had a usb port and an editor...
  26. unix-guy

    MeloAudio Midi Commander

    I have used many midi controllers. The only thing I would consider best about the FCB1010 is maybe by cost. It's hard to program and not very flexible... Unless you use a replacement ROM like the UnO. Which, by the way, was created by Xavier who later created the Gordius "brain" to extend it...
  27. RBM01991

    MeloAudio Midi Commander

    I would have gotten one, but its just too big, and the Morningstar is just too expensive even though its small. That's why I went with this thing. Pretty happy with it so far. I got a Key West trip full of gigs next week, so I'll have plenty of time for field trials. I'll report back if there's...
  28. lauke-lux

    MeloAudio Midi Commander

    And.. : Kick off these 2 expression pedals with optocouplers you need to clean twice a year, so that you can use your own exp pedals Use normal buttons like all controllers and Make it not exceed a 40cm length... The unit is great functionnally but has the ergonomics of dinosaur era ...
  29. ConstantM

    MeloAudio Midi Commander

    i agree. the fcb is 20 years old and still one of the best midi controllers out there definitely the best when it comes to features/price ratio. why can't these companies copy the formula and just add a usb port and an editor?
  30. lauke-lux

    MeloAudio Midi Commander

    Except the FCB1010 all low cost solutions that came out over the last 5 years do have functionnal or technical flaws, so I definitely quit and got me a Voes controller and will sell this and my Gordius LG2 only at musical retirement..
  31. Ugly Bunny

    Behringer FCB1010?

    I've only ever used the stock chip, though I did buy one of the other aftermarket ones. The problem is that the FCB1010 does not receive any useful information from the Axe Fx, so if you hit a switch on the FCB several times in a row, the light will turn on, then off, then on, etc...
  32. A

    MIDI block to external device ...can't get bank/pc change working correct.

    Kodamo Essence synth Like I said earlier I remember the FCB uno could send a few PC's and CC's in one command (one line). They also had them in a certain order so it was possible to bank select then send the PC.
  33. A

    MIDI block to external device ...can't get bank/pc change working correct.

    No luck :( The banks are changing but the PC that follows it pushes it back to its original bank. I remember I had a FCB controller with the UNO chip and in one line you could send a CC & a PC but you had to do it in a specific order. I'm suspecting its two different messages which is the...
  34. ConstantM

    MeloAudio Midi Commander

    with the "newest scene mode" firmware flashed (from here) you can get scenes 1-7 and the last switch is CC14 (tap tempo by default) i usually make use of all 8 scenes in my main kitchen sink preset but with little expression pedal assignment for switching i made do with 7. it's not bad when...
  35. Petrocelli

    Axe-Fx III Firmware Release Version 19.04

    Some Days ago, as the new Presets come out, i played along with these. I switched from Prest 6 (Top Boost) to Preset 7 (Prince Tone) and the AxeFX hangs (No Sound, Output Level 1 LEDS Maxed). Had to power cycle and couldn't replicate this problem! I switch my AxeFX III Mark II per MIDI with an...
  36. Petrocelli

    Axe-Fx III Factory Presets Release 19.04

    Switched with MIDI (Behringer FCB1010) from Preset 006 "Top Boost" to Preset 007 "Prince Tone". So no Sound anymore out of my MARK II and the Output 1 LED Meter lights fully! Switching to other presets are also without Sound - had to power cycle! After that the Unit works again and if i try to...
  37. lauke-lux

    MIDI Question

    Maybe not use learn but directly specify the adequate CC numbers ? I never experienced these problems with the midi controllers I used beforee(FCB1010, Gordius LG2...). On my FM3 I do the looper commands on a specific page of the Perform Menus
  38. N

    FM3 with FCB1010 + Eureka eprom

    Thanks for the update! I was just researching this purchase. I have a MeloAudio Midi Commander and it works alright, but there is much more functionality with the FCB1010+Eureka. I was just about to post a question about using the two together when you posted.
  39. podling9

    FM3 with FCB1010 + Eureka eprom

    Hello folks, I'm a new convert to the FM3 (from helix floor) and, for my needs, it provides everything and then some. I also had a FCB1010 that I've had for many years, but haven't used because I could never master the programming. I tried connecting it to the FM3 for external control and again...
  40. D

    Wish Midi mapping/settings "presets" to switch between when using different controllers

    I’ve got a general question out there for anybody out there? I am currently using a boss ES-8 to access my presets and scene changes in the AX8. I am currently able to change presets from both factory and user banks, but I am not able for some reason to access the scene changes in the different...
  41. ConstantM

    Wish Midi mapping/settings "presets" to switch between when using different controllers

    it would be nice to have a way to save midi configurations in presets to change when using different controllers. for example i have my fcb1010 at home but when i play out i want to use the mp-100 which is more limited in its configuration and i would like to switch a tab or sth in the axe fx...
  42. laxu

    Pirate Midi

    Exactly. I value the added buttons, lower cost, wirelessness and modularity of my Airstep setup but what you describe is definitely an issue since it has no screens. Units like the PirateMIDI would at least track their own internal status on their screen but that doesn't carry over between e.g...
  43. Ugly Bunny

    Pirate Midi

    Good point. In other words, the MIDI controller will not know what state your FM3 is in, so if you count on the pretty lights to know whether an effect is on or not or what scene you're on, etc., you won't be able to count on that. That was one of the frustrations with the FCB1010 - when you...
  44. Ugly Bunny

    Pirate Midi

    Yeah, the Pirate stuff would work fine, though it may not have all the functionality (not sure if it has a "hold" feature). Before the FC6 came out, I was using MIDI; a Behringer FCB1010 - as my foot controller. Now I use MIDI coming from OnSong on my iPad via Bluetooth to control my FM3 and...
  45. unix-guy

    Wish Virtual FC within AXE-Edit

    The Control Center software for uNo chip with FCB-1010 has this. I think the editor for Gordius Little Giant controllers (same creator) did as well. For midi, that was very useful to see what was being sent when a button was pressed. However, the FCs aren't midi so I'm not sure what would be...
  46. R

    What do you guys assign to your 2-button external foot switch?

    As I am using my FM3 with a desk mount, I needed access to some foot switching rather than using the very comprehensive and capable built in 3 buttons. I have an FCB1010 which is fine for some preset and scene selection and favorite presets but the pedals are not very usable. I bought a 2 button...
  47. Ugly Bunny

    FM3 Integration w/Onsong MIDI via WIDI

    Question: what manual are you talking about? Also, I've read that it's possible to send the exact tempo to using MSB and LSB, but I can't remember exactly how to do it, nor am I certain it works with Fractal gear. And yes, as Knaggster said to change scenes. I have my Scene change set up to be...
  48. lscottk

    Footswitch Topper Suggestions???

    Not sure if the Mooer toppers fit the MFC-101. I used a FCB-101 when I had my AX2. I purchased an FC-6 at the same time that I bought by my AX3. I'm sure that someone else has tried them, but I couldn't say who.
  49. Tom Morris

    Footswitch Topper Suggestions???

    I bought some cheap-O crap aluminum ones off amazon a couple years ago. They fit a bit loose so I put a layer of vinyl tape around the top edge of the switch to take up the space and they have stayed in place ever since. Never had a button sticking down issue but I have put a lot of miles on my...
  50. kjsmisf

    Ax Fx Ultra to FCB1010

    ...know this, as a senior on a fixed budget which means I buy what I can afford, my Ultra (700. MF) to me is one smokin red hot piece of gear. I was in studio this AM rolling thru presets with a huge grin of happiness! And, thought I had docs on putting my faves to 1-10 to match the FCB. URL...
  51. james_val

    Ax Fx Ultra to FCB1010

    Same here. Grouping my presets in 10s like this, the plan for me is now to assign one guitar for every group.
  52. Cmurph240

    The addition of the FC6

    Great feedback. I think I should be just fine for now. No gigging up here
  53. Ugly Bunny

    The addition of the FC6

    Before the FCs were released, I became a power user of the Behringer FCB1010 to use with my Axe Fx III via MIDI. The 6 switches on the FC6 are super powerful and I ditched the FCB for the FC6. Then I got the FM3 and started using Bluetooth MIDI to control my setup via OnSong on my iPad, now even...
  54. unix-guy

    Ax Fx Ultra to FCB1010

    There is the Easy Button! ;)
  55. kjsmisf

    Ax Fx Ultra to FCB1010

    Thx Jim, thats some great info. I do have a USB to midi adaptor from years ago, I think from an Echo audio device. so I may be able to use on my Mini M1. Roland, I was out in the studio this AM and stumbled on the midi #'s applied to the FCB in the extended manual. I am going to try your...
  56. Roland

    Ax Fx Ultra to FCB1010

    Been here. I used to run an Ultra and FCB1010. As has been said, programming the FCB1010 is tedious. The easiest solution is keep presets 1 to 10 on the Ultra free for your favourite presets. Build them elsewhere, and copy into 1 to 10.
  57. jimfist

    Ax Fx Ultra to FCB1010

    Unfortunately, there is no "quick and easy" in programming the stock FCB1010. As others have mentioned, there are software editors that can help ease the blow, but you'll need a USB to MIDI adapter to do it this way. In the meantime, here's a thread from 5 years ago that walks you through the...
  58. jimfist

    Storing Presets on Behringer FCB1010 with Ultra?

    There are a number of FCB1010 threads on this forum. Most are dated 2016 or before. I've not been using my FCB1010 at all for about 5 years, and very little for about 4 years prior to 2016. At this point, I've forgotten more than I remember about programming the unit. I used to contribute a...
  59. kjsmisf

    Ax Fx Ultra to FCB1010

    OK, I'll try and be more clear. Say I like presets 54,56,72,96,100,172,190,228,240,270 on the Ultra. So my fave 10 presets. I want to 'link' preset 54 to the FCB pedal switch#1, 56 to Pedal #2, 72 to Pedal #3 etc... The purpose of course is so I don't have to manually turn the Fractal rotary...
  60. E

    Storing Presets on Behringer FCB1010 with Ultra?

    really late to the party obviously i just acquired an fcb1010 today and it's taken me hours to get it operating. currently i have an axe fx 3, fc 12, ev pedals in the fc12.. connected to the pc. axe is my audio interface, but i have the fcb1010 going direct to pc with this MIDI to USB from mio...
  61. unix-guy

    Ax Fx Ultra to FCB1010

    What do you mean "port"? The FCB is somewhat limited with the stock chip from my understanding. I used it with the UnO chip with Axe Fx II for a while and that wasn't bad.
  62. kjsmisf

    Ax Fx Ultra to FCB1010

    I received a Behringer FCB 1010 over the Holidays and simply want to port my fave 10 presets (ie: 23,45,65,87 etc) from my AxUltra to the midi foot switch. As a midi newbie if one can direct me to a previous post to do this quick and easy, I would be appreciative. Thx KJ
  63. Ugly Bunny

    Behringer FCB1010?

    May not be a bad idea to start a new thread; here and TGP, so your question doesn't get lost. I don't know how to answer it, though, since I only use the stock chip lol.
  64. M

    Behringer FCB1010?

    Which chip is best for controlling Mobius (on Win 11) using FCB1010? Is it: .) the latest stock chip as of Dec 2021 (just bought a new FCB1010) .) TinyBox .) UNO .) UNO2 .) FCB-505 .) Eureka
  65. Ugly Bunny

    3rd party controllers vs FC-6

    I'm a big fan of the FCB1010; I have a series of videos on YouTube that shows you how to set it up with the Axe Fx III (but the setup would be the same) That said, now that I'm using my FM3 full-time, I just stick to the built-in 3 switches and use Bluetooth MIDI sent from my iPad and OnSong...
  66. unix-guy

    Wah problem...bug? or?

    Yes... And you have autoengage set at 95%. Assuming you still want it to sweep from low to high frequencies going from heel down to toe down, none of the other setting changes are required. Because what you're doing now is this: Setting Minimum value at toe down. Setting Maximum value at heel...
  67. Grievous66

    Wah problem...bug? or?

    I use FCB1010 and I like my pedal pressed toes down when is off. It's easier for me that way not to move it by mistake during tap dancing, and feels more natural to me to use it that way...same as with volume
  68. paranoid

    Attempting to use an fcb101 with eureka prom chip (EPROM)

    Are both the axe fx and fcb on the same midi channel?
  69. Rocketsurgeongeneral

    Attempting to use an fcb101 with eureka prom chip (EPROM)

    What a coincidence. I used to rock with one of those as well and originally got the fcb1010 and eprom for that purpose. When I got the Axe Fx II XL+ it was at the same time that the Axe Fx III was coming out at $2500 which I bought at the same time because I was so enamored with Fractal Audio...
  70. nero1701

    Attempting to use an fcb101 with eureka prom chip (EPROM)

    I had an eleven rack and a FCB1010, I found using only 1 midi cable(midi out FCB midi in Eleven Rack) I also found that the Eureka was more hassle than standard IC. In the end I went with a UNO V1.0.4
  71. Rocketsurgeongeneral

    Attempting to use an fcb101 with eureka prom chip (EPROM)

    I try to cycle through the presets in Pr mode but my Axe Fx II XL+ does not "obey" the fcb1010 eprom chip. Have you encountered this problem before and do you have a solution? I have the MIDI IN of the fcb1010 plugged into the MIDI out of Axe Fx II XL+ and the MID OUT/THRU of the fcb1010 plugged...
  72. Rocketsurgeongeneral

    Axe-Fx 2 XL+ and Eureka Prom 3.2

    I try to cycle through the presets in Pr mode but my Axe Fx II XL+ does not "obey" the fcb1010 eprom chip. Have you encountered this problem before and do you have a solution? I have the MIDI IN of the fcb1010 plugged into the MIDI out of Axe Fx II XL+ and the MID OUT/THRU of the fcb1010 plugged...
  73. Rocketsurgeongeneral

    Axe-Fx 2 XL+ and Eureka Prom 3.2

    I got as far as 12:44 before having to stop and ask a question. I scroll to the MIDI page just like you but my menu options are different: MIDI CHANNEL: 3 MFC PORT: DISABLED/FASLINK/ETHERCON MFC ECHO TO MIDI OUT: ON PROG CHANGE: ON MAPPING MODE: NONE MAP FROM PRESET: 0 MAP TO PRESET: 0 MAP TO...
  74. Rocketsurgeongeneral

    Attempting to use an fcb101 with eureka prom chip (EPROM)

    I got as far as 12:44 before having to stop and ask a question. I scroll to the MIDI page just like you but my menu options are different: MIDI CHANNEL: 3 MFC PORT: DISABLED/FASLINK/ETHERCON MFC ECHO TO MIDI OUT: ON PROG CHANGE: ON MAPPING MODE: NONE MAP FROM PRESET: 0 MAP TO PRESET: 0...
  75. TSJMajesty

    Axe Fx III vs. vintage 80s Rack

    Yeah, they were too close together, and the throw was really small. Sometimes the preset wouldn't change if I didn't hit it just right, then it just stopped working altogether. I ended up buying a FCB1010, which was a pretty good controller.
  76. Ugly Bunny

    Grouping presets?

    See, the problem is that I've never been able to successfully use "banks," so i've eschewed the whole idea. It started with when I first got my III and the FCB1010 MIDI controller in 2018. No matter what commands I sent, it would not change banks, so I've more or less just accepted there aren't...
  77. pushead2

    Midi Controller - Axe-Fx 2

    Seems like Voes might be the way to go. Anyone have any experience with the Peak FCB4X?
  78. pushead2

    Midi Controller - Axe-Fx 2

    Essentially, can someone recommend a smaller / non expensive (< 200 USD & used is okay) midi controller that can control presets AND scenes for the Axe-Fx II? I need the controller to fit within the confines of a rack mount drawer. So the MC101 & FCB1010 are not options. The more I dive into...
  79. W

    Practical questions Helix to FM3

    Ah got it...again if you absolutely need every switch available at all times a 3 button unit isn't going to work no matter the maker. I haven't gigged in what feels like forever, but back when I did and was running an FCB1010 with the KPA I started out with a layout like that but quickly found...
  80. sarge

    FM3/Morningstar MC6 MIDI In

    I wonder if it is some setting I changed then. A little over a year ago I had setup an external switch on my FCB1010 to turn on the tuner. I thought I set it back but maybe I am missing something. Regardless, this setup is fantastic for a device like the FM3. Really impressed with Morningstar
  81. Greg Ferguson

    Please help me understand how to program footswitches on FM3

    Rather than one of us write a tutorial, let's turn this around, and you tell us what you tried and we'll explain where you went wrong. It's a shorter path. Are you using the front panel of the FM3 or FM3-Edit? If you're not using the editor you should because the editor makes it very easy when...
  82. addedc

    Please help me understand how to program footswitches on FM3

    I programmed a FCB1000 for my Ultra and got along with the AX8 fine, but for some reason even after reading the user manual and footswitch guide, I can not wrap my head around how to program per preset footswitches on an FM3 using the OMG layout with an FC-6. Could someone please walk me...
  83. unix-guy

    Axe-Fx Firmware Release Version 17.01 Release Candidate

    Did you perform a system backup before updating? If so, restore it... System settings are not expected to change during a FW update and any future update would have no idea what settings you had before, so they won't "go back".
  84. Cpt737

    Axe-Fx Firmware Release Version 17.01 Release Candidate

    Yep that was it. They went back to -10 db. Also now I realise my Behringer FCB1010 midi pedal settings are gone which was a pain in the ass to program. I assume It will we go back to normal with the official release.
  85. S

    Can the Meloaudio Midi Commander do this?

    This is great, thank you! I’m competent in programming but misread that there are inherent limitations to the MIDI capabilities of the unit. I’m not worried about mimicking the FC units, but wanted to ensure I can program any switch to whatever CC or PC I want. I’m going to keep an eye out for...
  86. S

    Can the Meloaudio Midi Commander do this?

    yes, you can do that layout with the midi commander. i have the fcb1010 doing the same thing, which was affectionately known to me as the F%^&ing Computer Board of Ones and Zeroes," until i finally figured it and midi language (PC's, CC's, etc.) out completely. my 20+ plus years as a...
  87. C

    Are you using Ultra/Standard in 2021?

    I think there are recipes to be had... Running the shunt into a mild drive block (maybe with a mix of less than 100%?) and then into the 100% wet reverb, perhaps... or vice versa... Share back some cool recipes if you figure 'em out.
  88. H

    Are you using Ultra/Standard in 2021?

    Chris, I feel exactly the same about the Ultra. It's a real FX playground and I'm very conscious of barely scratching the surface. I've had a bit of a dive into the reverb today and it's very clear and very good. What I haven't found yet is the sort of gungy gunky qualities I like from rack...
  89. B

    Help with Axe fix III and FCB1010 Eurekaprom

    i just got my Axe fix III mkii two days ago and am trying to configure FCB1010 Eurekaprom 3.2 Presets are working but when I go to PR mode and engage button 9 to reach scene mode, non of the buttons change scenes. Apperantly from posted videos, I should be able to do so without any more...
  90. BC_GTR

    Edited Light

    I too have the same issue of the edit light coming on using the FC-12 controller. Used the FCB1010 via midi before that and it did not come on. Once the light comes on it does not go off even if I change presets. With FCB1010 if I went into my effects page and turned off or changed an effect the...
  91. K

    Preset change from FCB 1010 no chip with axe fx2?

    I am setting up my FCB 1010 to use with axe fx 2. The uno chip hasn't arrived yet. The FCB can send 5 pc changes and two cc with different value. I have successfully programmed it to bypass effects with one switch(Turn on and off ). Scene changes, expression pedal works fine. So my main issue...
  92. Grievous66

    Three Guitars at Once?

    Yeah ..axe can handle 3 guitars no problem. Small band here trying to keep it all simple in one rig. 2 guitars and 1 bass. A midi controller(FCB1010) is also attached to axe for scenes changes and wah. One person will do the tap dancing. For live I was thinking to use out4 to FOH an have all...
  93. jeken33

    Front panel freeze

    Hey everyone! I just got my hands on an FCB1010 from a buddy and have been trying to program it for the last hour. Everything was going smooth until I tried using scenes and one of the expression pedals. When I did that the front panel of my Axe Fx II XL would freeze and the output and MIDI-In...
  94. Piing

    Midi confusion

    Behringer FCB1010, and you get two extra expression pedals. If size is a concern: MeloAudio MIDI Commander
  95. sarge

    FM3 with FBC1010

    I have used the FBC1010 with the standard, the ultra, the II, the III, and the FM3. I do use another midi controller now for size (Morningstar MC8), but the FCB1010 is my backup and given the two built in expression pedals is freaking excellent.
  96. Ugly Bunny

    FM3 with FBC1010

    If you're interested, I made a series on YouTube about using the FCB1010 with the Axe Fx III; it would be nearly identical to set it up with the FM3. Just look for username "Ugly Bunny" and "Axe Fx III & FCB1010." I would also suggest a different approach: I use OnSong on my iPad which connects...
  97. K

    Preset updown in fcb 1010 with axefx2.

    I just found this old forum post and this seems to be the exact thing I wanted to achieve but looks complicated and something to do with sysex programing
  98. Axelman8

    Preset updown in fcb 1010 with axefx2.

    Hey there This info is interesting http://host.mtnsys.com:81/faq-fcb/PresetInfo.htm Cheers
  99. K

    Preset updown in fcb 1010 with axefx2.

    Thanks mate. Just checked the video but I know hos to setup the fcb 1010 to axe fx 2 . I just need to figure out how to bank up and down or which cc or pc midi commands allows to bank up and down thru a switch. There is no option to do that in the axe fx 2 midi settings.
Top Bottom