Quick question about the outputs.
I believe in the past both outputs 1 & 2 had both XLR and 1/4". I know on the III, output one has both XLR and 1/4" but output to only has XLR. I also know that "Outputs 3 & 4 are primarily intended to be unity gain outputs for fx loop use. "
I am wanting to send output #1 to my power amp which requires using the 1/4" that is fine, but if I then need to send output #2 to our fairly simple mixer which only has 1/4" inputs I obviously can't from output #2.
The question is, would I be better sending it to the mixer from outputs 3 or 4 and using a block to bump up the signal coming out, or can I simply get an adapter that allows me to connect quarter-inch to the XLR output for #2.
Thanks,
D
I believe in the past both outputs 1 & 2 had both XLR and 1/4". I know on the III, output one has both XLR and 1/4" but output to only has XLR. I also know that "Outputs 3 & 4 are primarily intended to be unity gain outputs for fx loop use. "
I am wanting to send output #1 to my power amp which requires using the 1/4" that is fine, but if I then need to send output #2 to our fairly simple mixer which only has 1/4" inputs I obviously can't from output #2.
The question is, would I be better sending it to the mixer from outputs 3 or 4 and using a block to bump up the signal coming out, or can I simply get an adapter that allows me to connect quarter-inch to the XLR output for #2.
Thanks,
D