Recent content by Toneboner

  1. Toneboner

    FM3 Firmware Version 7.00 beta 3

    @rglr Do you have any clue yet on what could have caused the Input block to not send any output signal after install of FW 7b3? There must be something done between 6.02 & 7b3 FW that impacted the Input block since both me and Arcalus have the same issue.
  2. Toneboner

    FM3 Firmware Version 7.00 beta 3

    I only had normal guitar input, output1 XLR to soundcard & USB connected. No difference if I unplug the USB. And also if I load FW 6.01 or 6.02 with same system file, presets and cabs everything works!
  3. Toneboner

    FM3 Firmware Version 7.00 beta 3

    Not a PC-issue at all! I can load FW 6.01 and FW 6.02 into the unit and everything works fine, but not FW 7 Beta 3.
  4. Toneboner

    FM3 Firmware Version 7.00 beta 3

    Already done that, same issue!
  5. Toneboner

    FM3 Firmware Version 7.00 beta 3

    Another person had the exact same issue so I don't believe it's a specific fault on my unit. Everything works fine with FW 6.01 & FW 6.02 with the same system parameters.
  6. Toneboner

    FM3 Firmware Version 7.00 beta 3

    Here is my system settings!
  7. Toneboner

    FM3 Firmware Version 7.00 beta 3

    1. On the Layout->Meters page. Are you seeing the input meters for Input1 block but no output meters for that block? I see input meter moving but no output. 2. When you edit the Input1 block what is the GAIN meter reading at the bottom of the page? Maxed out on 0 db all the time. 3. When you...
  8. Toneboner

    FM3 Firmware Version 7.00 beta 3

    I have now reinstalled Firmware 7 Beta 3 for the 4:th time today and I still get no sound out from the input block in any of the presets on my unit including factory and AustinBuddys. I see the meters moving on Input 1 but nothing comes out from the Input 1 block going forward in the grid with...
  9. Toneboner

    FM3 Firmware Version 7.00 beta 3

    My settings are like this (after reinstall of firmware 7 Beta 3 for the 4:th time):
  10. Toneboner

    FM3 Firmware Version 7.00 beta 3

    No I did not try that. None of all presets I have (Factory, AustinBuddys or my own) works so I doubt that there is an issue with my presets.
  11. Toneboner

    FM3 Firmware Version 7.00 beta 3

    I did do a revert to firmware 6.01 and then all presets have sound again! After that I did a reinstall of Firmware 7 Beta 3 and again I have nothing coming out of the Input block on any of the presets! Now I have reinstalled firmware 6.02 and then I got sound on all presets again! Guess there...
  12. Toneboner

    FM3 Firmware Version 7.00 beta 3

    I have now reverted to Firmware 6.01 and now I have sound on all presets again. No other changes done! Guess I will not load Firmware 7 Beta 3 (again) since that one mutes all sound on my unit (specifically nothing out from the input block)!
  13. Toneboner

    FM3 Firmware Version 7.00 beta 3

    I have now done a reset of the system parameters and still no sound out from the Input block! I have also reloaded the firmware 7 Beta 3 again just to be sure. I have used Fractal gear for many years, AXEFXII, AX8 and now FM3 that I've had for a year. Never had this problem before! Help!!!!!!!
  14. Toneboner

    FM3 Firmware Version 7.00 beta 3

    All global system settings I've looked at looks ok! Could not see anything that could explain this!
  15. Toneboner

    FM3 Firmware Version 7.00 beta 3

    Here is just one example! (none of the presets in my FM3 gives any output)
Back
Top Bottom