Recent content by sk8te4free7

  1. sk8te4free7

    Scene+preset=bank?

    This worked!! Thank you! I discovered the FC wasn't sticking to the layout i set it to (layout 7) so i setup a function on button 5 (hold) to switch between layouts. Is it me, but was the feature to have the rings on/off when selected/pressed been removed? or does this change per layout selected?
  2. sk8te4free7

    Scene+preset=bank?

    so basically i'm trying to have every 4 presets (1 through 4 - guitar 1) guitar 2 (5 through 8), guitar 3 (9 through 12) and by pressing the "bank up/down" i want these presets to show on the bottom row and the scenes to strictly be on the top row on my FC. this configuration has worked for me...
  3. sk8te4free7

    Scene+preset=bank?

    So i've got this screen in the preset and i'm confused on whether or not i have to change the primary preset under "Functions"? that's where i'm stuck
  4. sk8te4free7

    Scene+preset=bank?

    i actually use banks per guitar(s). so rather than have 1 preset for one guitar - both use different pick ups and are passive/active this has allowed me to create presets with scenes for each specific guitar.
  5. sk8te4free7

    Scene+preset=bank?

    If this has been answered: link me :) Can anyone guide me on creating 5 (or 10) preset banks+Scenes? When i used to use the AFX2 i had 10 banks total with scenes and when i pressed up/down the presets were made for each of my guitars. All 10 were specifically presets and a row of button in the...
  6. sk8te4free7

    Setlists and FC-12?

    Thanks. Copying and pasting. Much appreciated!!
  7. sk8te4free7

    Setlists and FC-12?

    sorry if this has been answered but i can't find this info anywhere else. Can anyone guide me into creating 5 preset banks? When i used to use the AFX2 i had 10 banks total with scenes and when i pressed up/down the presets were made for each of my guitars. Now, i'm struggling to find this...
  8. sk8te4free7

    Recording a wet & dry signal at the same time

    Sorry for the delay, it seems that option 5 is my best bet. Now, i've had to adjust a new aggregated I/O within my DAW and finally have my ins/outs discovered. Problem solved. I'm buying my own axefx3 now. I appreciate you guys' help! SOLD! :D
  9. sk8te4free7

    Recording a wet & dry signal at the same time

    Thanks!! I’ve read the instructions on this thread but I can’t find anything telling me the settings I need to adjust within the axe. My routing consists of connecting through the analog/XLR method. As I do want to use an external drive (I’ve edited my preset for this purpose via image) and...
  10. sk8te4free7

    Recording a wet & dry signal at the same time

    In regards to the complex option, is there anything that needs to be adjusted within a preset or global in/out setting?
  11. sk8te4free7

    External Stereo Effect

    Hey guys, i'm at the edge of having the exact setup as my axefx2 in terms of running my OD through loop. Now, i'm encountering a problem with hearing both wet in my out2 DI signal. my DAW is detecting the wet/DI signal path i've setup using a cable method for tracking into my interface's inputs...
  12. sk8te4free7

    External Stereo Effect

    As a new user (borrowing the unit), this was the preset that was premade and i copied what was written in the thread + what the youtube video demonstrated. The cable connections were plugged correctly - unintentional i guess. It worked!
  13. sk8te4free7

    External Stereo Effect

    Where would the mixer block need to be placed? I can see all meters detect noise signal but there’s absolutely no tone difference. I’ve also followed the steps in a YouTube video that indiciaria using two pedal outs (I’m using a precision drive). The cable setup is identical and still nothing...
  14. sk8te4free7

    External Stereo Effect

    hey guys, I’ve done this exactly as written. I don’t hear a difference in my tone when turning on my OD pedal in the chain loop described. The volume is up, I checked my I/o levels and seems to be high enough to have the signal recognize what I play. Is there anything specific I’d have to change...
  15. sk8te4free7

    FX Loop + wet/DI bleed?

    I was under the assumption that the output 2 was the dry signal. I'm plugged into my interface using the out into the interface. I get the wet and dry signals on the outputs 1/2. And now that i've checked, the output 2 is on ECHO output 1. I'm using the fxloop to engage/disengage the OD...
See more
Back
Top Bottom