Recent content by Peter Plectrum

  1. P

    Ability to label Bank 1 as Bank 0, etc.

    If you find a way to do this please post it. I am frustrated by the same issue. Would like bank 7 + 1 to be 71. Only way I can think of is to offset every preset by 10 in the preset mapping, but thats just messy. Need a solution to this but sadly this product not supported any more. Cheers
  2. P

    [solved] "Waiting for Tuner" Msg

    Thanks Yek. You are a hero. It was the Sysex message that needed to be turned on. Didn’t think of that. Cheers
  3. P

    [solved] "Waiting for Tuner" Msg

    I am connected by Ethernet CAT 5 cable. It loads all my patch names ok and other IA buttons seem to be working. If select the Hold Tap Tempo for tuner option it comes up with the same message waiting for tuner. The tuner does appear on the FX screen though. ?????? Help someone.......Argggg!
  4. P

    [solved] "Waiting for Tuner" Msg

    I have just acquired an MFC101 mk III which I am using with my AXE FX II ( original) and I have a problem with the Tuner function. When I select the Tuner option from the IA switch 17 it puts the AXE FX into tuner mode ok but the mfc display just shows the message "Waiting for Tuner". I don't...
  5. P

    I loose volume output over time. Power down and up and its back again

    Hi. It happens when I turn off the Axe FX and back on again not my amp. Sudden increase in volume for the same preset when it comes back on.. Cheers
  6. P

    I loose volume output over time. Power down and up and its back again

    Hi. Thanks for the reply. Some good advice there on partitioning the problem. I will try. I use a Behringer FCB1010 and the lockups are a random thing when changing presets but not a specific preset change, so very hard to replicate the problem. I will try removing the FCB and seeing what...
  7. P

    I loose volume output over time. Power down and up and its back again

    I do use an expression pedal for 6dB of boost when soloing. That continues to work ok ( the normal position is obviously the lower output) it is just the overall volume drops over time. Any Ideas welcome.
  8. P

    I loose volume output over time. Power down and up and its back again

    I am now running Quantum 10.01 but this was happening to some extent on my previous rev 8.02. After about 30-40mins of playing live I notice that my volume seems lower. I am aware of volume fatigue so previously put it down to my ears. However after having a couple of lock ups mid gig I realised...
  9. P

    Not enough memory after update to 19.00

    Thanks will try that.
  10. P

    Not enough memory after update to 19.00

    HI I have just updated from 17 to rev 19.00 and found that many of my patches that have ultares cabinets are now over the maximum memory limit. What changed to cause that? In fairness it is mostly patches that have two cabs but I am having to change one to a normal res to get working. They...
  11. P

    Can't load V12 banks with rev V12.02

    I believe that the banks are still V12 even if I upgrade to 13.07? I wondered if there was a problem with V12 banks? Anyway I still can't explain what is going on. If I load V12 OS and then V12 banks I get a blank screen on all patches. Something weird going on.
  12. P

    Can't load V12 banks with rev V12.02

    I have searched for info about this but not found any. I have been slow to move form V9 to V12 as many of my live sounds were drastically changed in the new rev. Anyway having finally completed my sounds which are all in bank A I tried to load V12 banks A and B into B and C banks location...
  13. P

    Struggling to upgrade from 9.02 to 12. Just can't get my sounds

    Thanks guys for the quick responses. I have spent hours on this and not been very successful. I was hoping there was a must do thing that would solve the problem. I must check the cabs now as that may be the main issue. I did not realise they had changed with V12. Do I need to upload the V9...
  14. P

    Struggling to upgrade from 9.02 to 12. Just can't get my sounds

    Hi Guys I have been stuck on 9.02 since it was released. I am not complaining about that, have some great presets that I use live all the time, mostly using Plexi's, Mesa, Dumble and AC30 type amps. However, when I upgrade to version 12 the first thing that happens to all my presets is that...
Back
Top Bottom