Recent content by Pagzy

  1. Pagzy

    USB Audio Driver Update for Axe-Fx III, FM3, and FM9

    I'll try another cable, cheers
  2. Pagzy

    USB Audio Driver Update for Axe-Fx III, FM3, and FM9

    This started happening to me after updating the USB drivers. The ghosting happens when I turn the Value Knob/Wheel too fast
  3. Pagzy

    Feedback Send as signal splitter?

    Couldn't you omit the Send and Return blocks and just have Flanger1 > Out3 on one row but also Flanger1 > Amp1 etc with a connection on another row? i.e you can split a signal with a virtual cable from any block ...but yeah if you preset is too complicated and you need to send it elsewhere on...
  4. Pagzy

    Game changer for dialing presets!

    Hey @warlockII or anyone else trying the IR I posted above, I had a loud rehearsal on the weekend and one preset in particular started maxxing out the CLR with too much bass, all the others were fine though. The IR was originally going to my CLR's and a sub with a crossover set to 100Hz 12dB...
  5. Pagzy

    Axe FX III EMI issues? Thinking about upgrading from the II.

    Do you constantly have a laptop or something connected via USB? If it's a grounding issue Cliff mentioned using a USB Isolator in another thread...
  6. Pagzy

    Game changer for dialing presets!

    Yeah for sure, a lot of PA speakers will have a response that isn't flat compared to a quality FRFR. So if that QSC 12.2 is your personal monitor on stage you'd keep using the Arc with it, or you can try to create an IR to use straight from the AxeFX3 to the QSC, like I did with the VENU360. IMO...
  7. Pagzy

    Game changer for dialing presets!

    This is what I originally intended to do with the VENU360 and the AxeFX3, get a flat response in any room/venue. In reality, setting up the mic and doing the EQ sweeps isn't always possible, depending of course how big an artist you are, and how many other bands on the bill and where your set is...
  8. Pagzy

    Game changer for dialing presets!

    Here ya go mate, my DBX VENU360 to CLR flat EQ calibration IR attached! For a bit of info the VENU360 calibration was taken with two active CLR Neo MkII's, about 2.8m apart (a bit over 9ft), on speaker stands with the coaxial tweeter approximately 1.75m high (nearly 6ft), (they are close to...
  9. Pagzy

    Game changer for dialing presets!

    I'm at work at the moment man, I'll see if I can upload it later tonight. I'd actually be interested to know if it works for other CLR users in different rooms. It doesn't tweak too much EQ... but it makes music from the laptop/USB Input sound awesome through them for me too. I use my CLR's as...
  10. Pagzy

    Game changer for dialing presets!

    To my two CLR's. Without the VENU360 I now have to route an Output to FOH that doesn't use the IR.
  11. Pagzy

    My JCM800 Just Blew Up

    Hmmm, I need a midi controlled fog machine for more authenticity.... 🤔
  12. Pagzy

    Game changer for dialing presets!

    I wish you could do this too! :) I have a DBX VENU360 that I used with a Sonarworks calbrated mic. I used to have it in my rack with the AxeFX3 and just kept it on the setting I got at home with my CLR's, which seemed to be great for the venues I play. I ended up Tone Matching the VENU360 into...
  13. Pagzy

    Wish EhX Mel9

    +1
  14. Pagzy

    Axe-Fx III Firmware 23.00 Release

    Just when you think it can't get any betterer 🤘
  15. Pagzy

    Atomic CLRs not available where I live, what are other good FRFR monitoring options?

    Yamaha DXR10's are another option for close to flat response... Every speaker, cab and room will have some sort of colouration, I have CLR's and they still needed EQ to be flat in my jam room. Whatever you use, including your monitors, I would suggest getting a DBX Driverack for live, (I have...
See more
Back
Top Bottom