• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Recent content by GitarKnut

  1. GitarKnut

    Axe-Fx III Firmware Release Version 14.00

    Fully agree, I read this thread to get information and learn about FW14.00 so my dear forum colleagues - can you please stick to the topic?
  2. GitarKnut

    Bug? FM3 Output suddenly goes silent

    I have experienced the same issue when playing music via USB and guitar at the same time. (Only plying music via USB with no guitar connected or only playing guitar with no USB audio processing is fine.) It happends regardless of FM3-Edit being open or not; FM3 HP, FW 1.06 Beta 3, Windows 10...
  3. GitarKnut

    FM3 Firmware 1.06 Public Beta 2

    I had the same problem and the reason was that the Input to the Pitch Follower was set to Input 2. See this thread: https://forum.fractalaudio.com/threads/pitch-follower-not-working-responding-input-source-for-the-pitch-controller-was-factory-set-to-input-2.163770/
  4. GitarKnut

    Not a Bug Pitch Follower not working/responding - Input Source for the Pitch controller was (factory) set to Input 2

    Thanks - that solved it for me as well! But I really think that Input 1 should be the default value for the "Input Source". Anyway, it's not a bug. Do anyone have a good explanation on why the default value is Input 2 ??
  5. GitarKnut

    Not a Bug Pitch Follower not working/responding - Input Source for the Pitch controller was (factory) set to Input 2

    FW 1.05 and FM3 Edit 1.01.07. I have tried to allocate the Pitch Follower to Input Trim (in the amp block) both from the FM3 Edit and front panel of the FM3 but the FM3 does not respond on pitch changes from the guitar. I also have an Axe Fx III and there it works as supposed so I am quite sure...
  6. GitarKnut

    Bug? PC and DAW audio glitches and goes out of tune with digital artifacts every 10-15 seconds

    I experienced the same issue but using another USB-port on the PC has cured the problem. (FW 1.05 and WIndows 10)...... very strange!
  7. GitarKnut

    Power Supply AC Line Frequency

    My understanding is that the Power Supply AC Line Frequency relevant to the performance of the noise gates is set from the front panel; Setup-> Global Settings -> Bottom of the Config tab (AC Line Frequency). OR: Axe Edit III; Setup -> Config (AC Line Frequency is found bottom right). If I am...
  8. GitarKnut

    Can a switch increment channels on multiple blocks?

    I can do this with my RJM MasterMind but not on my FC6. One workaround is to use Scenes for this, but I want to stay within the same Scene and kick in various effects and change Channel on others using a single switch. The idea is to have a "Master" solo/lead switch working on all Scenes. See...
  9. GitarKnut

    Axe-Fx III Firmware Version 11.02 Public Beta #5 (Beta_4)

    It has happened to me a couple of times that the sound has degraded slightly after installation of a new FW but re-installing the FW (and re-setting the system settings/parameters) have always provided a "better than ever" sounding Axe Fx III. I always take a beck-up before installation and just...
  10. GitarKnut

    Axe-Fx III Firmware Version 11.00 Public Beta

    I have loaded FW11b and its sonic and feel/response qualities are beyond belief. So far I have tested with RCF NX12-SMA, Atomic CLR and in-ear. My preferred way into the new impedance modelling is that existing presets should be kept unaltered (i.e. FW 10 or earlier). After all we have tweaked...
  11. GitarKnut

    Axe-Fx Firmware Version 8.00

    OK, but how can I accomplish what I want to do? (Use a Control Switch on the FC-6 to simultaneously change the Bypass State on some Blocks and Channel on another). And why do the AXE FX III respond to External pedals/switches connected to the FC-6? I can easily do this on my RJM MM GT22 so I am...
  12. GitarKnut

    Axe-Fx Firmware Version 8.00

    As I stated in my post they definately do in my set-up. I rock the Expression pedal connected to the FC-6 and the Channel in the Reverb block nicely changes from A to B to C to D and then it starts over again with further movement of the pedal. So I am a bit confused....
  13. GitarKnut

    Axe-Fx Firmware Version 8.00

    I attached an External Switch to the FC-6 and mapped it to the Reverb Block on the "Channel" page on the AXE FX III (using the "Learn" function. Then I could change Channel on the Reverb Block but only toggle between Channels A and D (I assume A is "min value" (0) and D is "max" value (3 or 127)...
  14. GitarKnut

    Axe-Fx Firmware Version 8.00

    I am not able to send MIDI messages from a switch set up as a Control Switch my FC-6 (FW 1.09) to the AXE FX III (FW 8.00). This should be possible according to the manuals, Page 45 in the AXE FX III manual and Page 39-40 in the FC Manual. (Yes, I have read the manuals and I have searched the...
  15. GitarKnut

    Change Bypass status on some blocks and Channel on another block with one switch

    Thanks for chiming in but I have already tried that (as mentioned in my first post I have read the manual;)). Just for testing I tried to use the same CS to select Scenes (also on Page 45 in the AXE FX III manual and Page 39-40 in the FC Manual) but that did not work either. I also tried the...
Top Bottom