• We would like to remind our members that this is a privately owned, run and supported forum. You are here at the invitation and discretion of the owners. As such, rules and standards of conduct will be applied that help keep this forum functioning as the owners desire. These include, but are not limited to, removing content and even access to the forum.

    Please give yourself a refresher on the forum rules you agreed to follow when you signed up.

Recent content by dsimms

  1. dsimms

    FM3 and FC-6 on a Temple Audio Duo 24

    None so far. I'm just plugging my FM3 and Relay 50 power supply into a power strip since I need that for one or two CLR wedges anyway. If I get too obsessive about tidying things up, I'll think about the Voodoo Pedal Power 2 or the Furman AC215. Temple makes a mount kit for the Voodoo to go...
  2. dsimms

    FM3 and FC-6 on a Temple Audio Duo 24

    Here you go. I circled in red where I had to drill a hole out to make it bigger to line up. I used those M3.5 x 0.6 16mm machine screws for everything except the Relay G50, which is attached by velcro. I might use one of Temple's mounts for that if it doesn't stay firm, but for now it's pretty...
  3. dsimms

    FM3 and FC-6 on a Temple Audio Duo 24

    I used their planner too, and it came out very close. Here it is, when I was trying to figure out how to get the relay wireless on there. Fortunately it just fit underneath using velcro to mount it to their center support bar. Although the real picture below makes it look like their models are...
  4. dsimms

    FM3 and FC-6 on a Temple Audio Duo 24

    I considered those, and they'd be good if you're always moving things around on your board. In the end, I didn't want to have adhesive on the bottoms of my Fractal gear when screws hold well enough.
  5. dsimms

    FM3 and FC-6 on a Temple Audio Duo 24

    They're M3.5 x 0.6, 16 mm long. I ordered the exact ones gregeddins linked to above.
  6. dsimms

    FM3 and FC-6 on a Temple Audio Duo 24

    Nice! I came close to doing that but decided to go with their Duo 34 to hold the two foot controllers. I used the screws to hold everything down as well. Had to widen a couple of the holes to place the EV-1's, but the FM3 and FC6 lined up perfectly. Was also able to mount my G50 Relay...
  7. dsimms

    FS Axe FX II XL+ and MFC 101 MK III. Excellent condition w/ boxes and manuals. New pedalboard and ATA case options.

    Bump revised price and pedalboard and Anvil ATA case options.
  8. dsimms

    Which pedalboard are you using?

    I was impressed with their template maker (http://templeplanner.com/) that let's you pick from hundreds of devices and place/rotate them on their boards, then change the boards around to see how things would fit on their alternatives. Pretty slick app. I was able to quickly figure out the Duo...
  9. dsimms

    Need a new pedalboard... Let's chat!

    I'll probably wait and see if I can use the screws like Rich5150 suggested. That's how I had my MFC 101 on my Furman SPB-8, which is a great clamshell style pedalboard but not wide enough now. I'd also prefer not have a sheet of velcro semi-permanently adhered to the bottom of the FM3 or FC6.
  10. dsimms

    Need a new pedalboard... Let's chat!

    I've just laid out a Temple Duo 34 to hold my FM3, FC6 and two EV1s. Did their prepunched holes line up with your FC6 screw holes/feet or did you use their mounting system?
  11. dsimms

    New FC-6 to go with FM3 - moving EV-1 pedal to FC-6?

    Thanks Joe! I'm good with global volume and wah and haven't needed to change levels on reverbs and delays so I've been keeping it simple. BTW, I saw you were from or spent some time near Lakehurst. I was stationed at McGuire in the 80s and married a Browns Mills girl (ex now). I'm in...
  12. dsimms

    New FC-6 to go with FM3 - moving EV-1 pedal to FC-6?

    I'm not getting any response using my previous volume EV1 plugged into the FC6 Pedal 1 input. My volume is at 100% and the pedal does nothing. That's why I was thinking I might have to do something to tell the FM3 that the pedal was plugged into the FC6. I'd like it to work like you said, so...
  13. dsimms

    New FC-6 to go with FM3 - moving EV-1 pedal to FC-6?

    Just got my FC6. I've been using the FM3 with two EV pedals, plugged into its Pedal 1 and Pedal 2 inputs. Is there a way I can plug my two EV pedals into either the FM3 or FC6 Pedal 1 & 2 inputs without having to reset something each time I switch?
  14. dsimms

    You Guys/Gals Are in for Another Treat

    It's been a little slow in here lately
  15. dsimms

    Stereo wired double neck into Axe 3

    Back problems. You have back problems.
Top Bottom