Recent content by bwill81

  1. bwill81

    4 button switch AND Exp pedal?

    Unfortunately that configuration will not work. The OCD Quad uses two TRS cables, and will leave you with no place to plug your expression pedal into the FM3.
  2. bwill81

    Don't run CPU past 76%...

  3. bwill81

    Pedalboad for FM3 and EV2?

    If you can find one, the legacy PT-JR will fit both the FM# and pedal. Plus with the legacy JR's height being 2.5 inches, it will fit in the case. I used 3M Dual Lock to secure mine. No issues yet. Another option would be the NuX Bumblebee. If you want to see and/or configure different...
  4. bwill81

    AX8 labels?

    You might be able to find a set on eBay or Reverb. Personally, I would wait for Sukh (@ZenRigs Man ). His products are well worth the wait!
  5. bwill81

    Using an external footswitch (Boss FS-7)

    "Scene Revert" is not really applied here. The wah (for this example) is in the "off" state. Then it's turned on when you apply pressure to the expression pedal. But when you take you foot off the pedal, then the effect is disengaged. I hope this helps clarify things for you. Good luck.
  6. bwill81

    Using an external footswitch (Boss FS-7)

    I tried the same thing when I first got my AX8. The external switches will remain in the "on" state until you change them. They do not reset with scene changes. I found that the best use for me was to assign them as momentary switches, and use them for "press and hold" functions (delay holds and...
  7. bwill81

    Using a Pedaltrain for the AX8

    A = Total depth of the case B = How high the actual pedalboard sits off of the ground X = Available mounting space A-B = X Short answer: You will be fine. I have a Classic 2 and mine fits. You may need to cut out some of the foam in the lid though.
  8. bwill81

    What is everyone doing for AX8 reverb these days ?

    I've been rather content using the small spring reverb. That being said, the only reason I have ever used reverb was to make up for that "cab in the room" feel.
  9. bwill81

    Show Us Your AX8 Rig! (post your pics)

    Nice! Now you just need to get some KickTags from @ZenRigs Man and you will be set!
  10. bwill81

    CPU limit issue

    This is a common topic here. Reverb is one of the most cpu intensive blocks. You may want to see if the spring reverb type can work for your needs. Or try lowering your echo density on your reverb block.
  11. bwill81

    Building out a pedalboard

    You can find quite a few options/ideas in this thread: https://forum.fractalaudio.com/threads/show-us-your-ax8-rig-post-your-pics.107905/
  12. bwill81

    Dedicated External FS for Leads, Boost

    I ended up going with a couple of these: https://www.jimdunlop.com/product/m199-7-10137-08777-4.do
  13. bwill81

    Please Suggest a LOUD, CLEAN amp/preset

    My best clean sounds come from the Shiver Clean.
  14. bwill81

    Assign footswitch issue - some do, some dont allow the option

    Is the Enhancer block in the chain of the preset itself? I have found that while you can assign an effect to a global footswitch, I believe you are still required to add the block to the chain in order to take advantage of it.
Back
Top Bottom