FM3 Firmware Version 5.03

Status
Not open for further replies.
Murphylaw said:


While we all wait "patiently" for 6.0....Give this a try. Works great! Still plenty of milage with what's under the hood
Click to expand...

teddis said:
Makes you wonder why a “switch” isn’t in the GUI to trigger this type of AITR simulation. The EQ part of course would be custom.
Click to expand...
In a pinch you can just do that in the cab block using high and low cuts. Precious block space & Cpu saved on the FM3. Rather than adding a whole GEQ block, the output eq in the Amp block is adequate.
 
Neftalí said:
Razón tienes. En España ocurre que siempre tenemos opción a obtener fractales nuevos cuando ya están "obsoletos?". Pero reitero, aunque lo de bajar el uso de CPU es interesante, ya creo que es jodidamente bueno, y que es más un tema de sugestión y deseo compulsivo ( naturaleza humana) de algo nuevo. Pero, si ayer algo era increíble, por qué hoy necesita mejora? Ojo, que soy el primero que está en esa situación, pero en algún punto hay que plantearse, no? Y cuando ese momento llegue...de repente ya no vale?

Por otro lado, celebro que hispano hablantes también nos animemos. Espero que nuestros compañeros anglófonos no se molesten...
Click to expand...
I was trying to be polite up above and humorous, but you really need to take it to Babel's Corner.
 
Last edited:
Mal said:
Perhaps because it can be seen as rude to the predominately English speaking members AND there is a specific place for inter-linguistic exchange?
Click to expand...
What I found odd was that to me, it seemed a little rude to be telling people to "take it elsewhere". But whatever - I did ask the question and you have all given me an answer, so that's the end of that line of enquiry.

Hoping for a 6.0 tomorrow. I'm all about the SICs and it was months ago now that I was briefly talking to Cliff about these SIC improvements (he thought I was using an AF3, because my SIC question was asked in that forum); so I've been eager to try them since that time when he was working on them.
 
jellodog said:
What I found odd was that to me, it seemed a little rude to be telling people to "take it elsewhere". But whatever - I did ask the question and you have all given me an answer, so that's the end of that line of enquiry.

Hoping for a 6.0 tomorrow. I'm all about the SICs and it was months ago now that I was briefly talking to Cliff about these SIC improvements (he thought I was using an AF3, because my SIC question was asked in that forum); so I've been eager to try them since that time when he was working on them.
Click to expand...
Cool. Personally I love languages, but there's a time and place. Try to envision it to the extreme where you have three or four languages going back and forth in any one thread. Not everyone could participate.
 
fcs101 said:
granted that this particular thread is off the rails,
Click to expand...
Actually, I do have something that is unusually very on topic.

With firmware 5.03 I can pretty much freeze my FM3 every time I use the hardware interface by fiddling with various speaker parameters on the hardware (not FM3-Edit).

Sometimes it can take an hour, sometimes just a few minutes, but it does eventually lock up. We're so close to 6.0 now though, that I will wait until that is released to see if the bug is still there before reporting it.

(or perhaps I just have reported it).

A couple of times I was changing the compliance parameter, another couple of times it was the HF resonance parameter. Sometimes, IIRC, it was switching SICs.
 
Last edited:
jellodog said:
Actually, I do have something that is unusually very on topic.

With firmware 5.03 I can pretty much freeze my FM3 every time I use the hardware interface by fiddling with various speaker parameters on the hardware (not FM3-Edit). Sometimes it can take an hour, but it eventually locks up. We're so close to 6.0 now though, that I will wait until that is released to see if the bug is still there before reporting it.

(or perhaps I just have reported it).
Click to expand...
I haven't experienced this, but then again I don't sit and tweak speaker parameters extensively.

If you think you have found a bug, then please post in that area.
 
jellodog said:
What I found odd was that to me, it seemed a little rude to be telling people to "take it elsewhere". But whatever - I did ask the question and you have all given me an answer, so that's the end of that line of enquiry.

Hoping for a 6.0 tomorrow. I'm all about the SICs and it was months ago now that I was briefly talking to Cliff about these SIC improvements (he thought I was using an AF3, because my SIC question was asked in that forum); so I've been eager to try them since that time when he was working on them.
Click to expand...
Fair enough.
 
jellodog said:
What I found odd was that to me, it seemed a little rude to be telling people to "take it elsewhere".
Click to expand...
I understand that feeling, but @Greg Ferguson didn't intend any rudeness. English is the language of this forum — not only for native English speakers, but for everyone. This ensures that even non-native English speakers only need to learn one language to read the forum. It may not be their native language, but it is still only one language. If they learn that one language, they can participate in the entire forum.

Posts made in Spanish are a great help to Spanish-speaking people, but they are a hindrance to those who speak Polish or Mandarin or Marathi. Thank you for helping to keep this place accessible to the most people. :)
 
jellodog said:
With firmware 5.03 I can pretty much freeze my FM3 every time I use the hardware interface by fiddling with various speaker parameters on the hardware (not FM3-Edit).
Click to expand...
Please document the steps you followed. Being able to reproduce the problem consistently is the best way for the developers to find and fix a problem. Conversely, if they can’t duplicate it they can’t easily fix it.

Tag @rglr in your message as he will need to see it.
 
Your joking right- there’s not really a fucking Babels Corner right?
And if there is please tell me you didn’t just recommended it because a couple Spanish guys briefly interacted or whatever.
You couldn’t swipe past half a dozen consecutive posts in foreign language out of 400,000 bullshit ones in your own?
If you all see a red dot on this guys forehead when walks into the FM3 Firmware Thread smoking area-
just drop to the ground folks.
 
Last edited:
From some point on, threads will get derailed if a topic has been absolutely beaten to death. Understandably so.

I don't see how this thread can be saved. It's lived its life. I feel like only new firmware will liberate us, at this point.
 
Status
Not open for further replies.
Back
Top Bottom