Yes, in short, the parameter Power Tube Bias Excursion in FM3 Edit is incorrectly connected to the (Preamp) Bias Excursion parameter. This will be an easy fix for @Michael PickensI guess I found a small bug in the FM3-edit.
Yes, in short, the parameter Power Tube Bias Excursion in FM3 Edit is incorrectly connected to the (Preamp) Bias Excursion parameter. This will be an easy fix for @Michael PickensI guess I found a small bug in the FM3-edit.
Fixed for next release.Yes, in short, the parameter Power Tube Bias Excursion in FM3 Edit is incorrectly connected to the (Preamp) Bias Excursion parameter. This will be an easy fix for @Michael Pickens
I don't know if this is a "feature" or a bug but double clicking the speaker page settings will not reset them to what is the default for the amp model but instead to something else. Using amp model defaults for doubleclick resets would be better to me.
Quick example of the channel library in action.
I've got another one coming out tomorrow on the g66 channel with a few different examples too.
Yes, i also mentioned this in the 1.04.00 thread!Potential bugs report:
-When clicking on the Amp Block Library screen/tab, the folder blinks open then suddenly disappears.
-FC Controllers -> FC Config: Mini Display, Ring Intensity, & Bank Size knobs are very laggy, taking around 10+ sec to show the updated changes.
Quick example of the channel library in action.
I've got another one coming out tomorrow on the g66 channel with a few different examples too.
Damn, did the engine get an upgrade or is my mind playing tricks, this sounds f**king amazing! Am I hearing things????FM3-Edit 1.05.00 public beta 1 is available below:
OSX:
https://www.fractalaudio.com/downloads/FM3-Edit/FM3-Edit-OSX-v1p05p00-public-beta1.dmg
Win64
https://www.fractalaudio.com/downloads/FM3-Edit/FM3-Edit-Win-v1p05p00-public-beta1.exe
Win32:
https://www.fractalaudio.com/downloads/FM3-Edit/FM3-Edit-Win32-v1p05p00-public-beta1.exe
This build supports firmware 4.00 beta 5:
https://forum.fractalaudio.com/threads/fm3-firmware-version-4-00-beta-5.173859/#post-2106749
RELEASE NOTES
VERSION 1.05.00 Public Beta 1
June 10, 2021
Current FM3 Firmware Version: 3.02
SYSTEM REQUIREMENTS
- Mac version requires OS version 10.7 or newer
- Windows version requires Windows 7 or newer
- Minimum firmware version 1.00
NEW IN THIS VERSION
* Support for firmware 4.00 public beta 5.
o Updated CABINET layout.
o Redesign of AMP block layout.
o Added "Zero All" to GEQ layout.
o Added Output 2 Configuration parameter "Output Type" to SETUP Audio/USB page.
* Added editor name to the "Preset Leveling" window.
* Added "Swap" sub-menu to Scene Mgr's dropdown menu.
* Added "Copy >>" and "Copy <<" buttons to the Perform view which copy all the Per-Preset controls to the Global controls and vice-versa.
* Added "Clear Per-Preset" and "Clear Global" buttons to the Perform view which clear all the controls from the Per-Preset or Global section.
* Corrected a bug in the Perform View which showed "ghosted" labels from a previous preset where a control does not exist in the current preset.
* Corrected a bug in which the Perform View closed when displaying the Controllers or Setup parameters.
* Corrected GAIN meter for COMPRESSOR Studio types.
* Extended the Block Library to include a Channel Library.
o The Block Library dialog displays the preset name as the default block name.
o The "Block Library: Save" and "Block Library: Save As" dialog provide the option of saving as an "entire block" or as the "current channel".
o "Save entire block" will save a block library entry as an entire block of all of its channels and modifiers. This is the "old" or "legacy" method. The icon of a quartered square with 4 colored sections denotes an entry saved as an entire block (all channels). Loading a block entry will overwrite all channels in the selected block.
o "Save only current channel" will save a block library entry containing only the currently selected channel. No modifiers will be saved. The icon of a quartered square with 1 central overlapping colored section denotes an entry saved as a single channel. Loading a channel entry will overwrite only the currently selected channel. Loading a channel entry into an empty grid space will insert a new block and load the entry into CHANNEL A.
I know that haha , I meant the actual unit, have Fractal tweaked the software? Also, the Precision pedal seems to be reacting more like the real one! Or I may have just not been paying attention over the last fortnight.The editor doesn't create sounds, the hardware does.
FM3-Edit 1.05.00 public beta 1 is available below:
OSX:
https://www.fractalaudio.com/downloads/FM3-Edit/FM3-Edit-OSX-v1p05p00-public-beta1.dmg
Win64
https://www.fractalaudio.com/downloads/FM3-Edit/FM3-Edit-Win-v1p05p00-public-beta1.exe
Win32:
https://www.fractalaudio.com/downloads/FM3-Edit/FM3-Edit-Win32-v1p05p00-public-beta1.exe
This build supports firmware 4.00 beta 5:
https://forum.fractalaudio.com/threads/fm3-firmware-version-4-00-beta-5.173859/#post-2106749
RELEASE NOTES
VERSION 1.05.00 Public Beta 1
June 10, 2021
Current FM3 Firmware Version: 3.02
SYSTEM REQUIREMENTS
- Mac version requires OS version 10.7 or newer
- Windows version requires Windows 7 or newer
- Minimum firmware version 1.00
NEW IN THIS VERSION
* Support for firmware 4.00 public beta 5.
o Updated CABINET layout.
o Redesign of AMP block layout.
o Added "Zero All" to GEQ layout.
o Added Output 2 Configuration parameter "Output Type" to SETUP Audio/USB page.
* Added editor name to the "Preset Leveling" window.
* Added "Swap" sub-menu to Scene Mgr's dropdown menu.
* Added "Copy >>" and "Copy <<" buttons to the Perform view which copy all the Per-Preset controls to the Global controls and vice-versa.
* Added "Clear Per-Preset" and "Clear Global" buttons to the Perform view which clear all the controls from the Per-Preset or Global section.
* Corrected a bug in the Perform View which showed "ghosted" labels from a previous preset where a control does not exist in the current preset.
* Corrected a bug in which the Perform View closed when displaying the Controllers or Setup parameters.
* Corrected GAIN meter for COMPRESSOR Studio types.
* Extended the Block Library to include a Channel Library.
o The Block Library dialog displays the preset name as the default block name.
o The "Block Library: Save" and "Block Library: Save As" dialog provide the option of saving as an "entire block" or as the "current channel".
o "Save entire block" will save a block library entry as an entire block of all of its channels and modifiers. This is the "old" or "legacy" method. The icon of a quartered square with 4 colored sections denotes an entry saved as an entire block (all channels). Loading a block entry will overwrite all channels in the selected block.
o "Save only current channel" will save a block library entry containing only the currently selected channel. No modifiers will be saved. The icon of a quartered square with 1 central overlapping colored section denotes an entry saved as a single channel. Loading a channel entry will overwrite only the currently selected channel. Loading a channel entry into an empty grid space will insert a new block and load the entry into CHANNEL A.
Fixed for next release.When saving channels or entire blocks of controllers, the containing folder of these blocks library presets is called "unnamed".
I don't know if this is the normal behaviour or not.
I posted a thread with the same issue recently, with pictures:
https://forum.fractalaudio.com/threads/fm3-firmware-version-4-00-beta-2.173429/post-2099933
Sooooon?Fixed for next release.