Connection Questions , AxeIII to UA interface and CLR

csgband

Inspired
So I have my AxeFxIII connected to my UA interface.
I also have it connected to my CLR.
I want to set it up so I have stern to my UA and summed L&R to my CLR.
Here is how I have it set up. I can't figure ho to get the sound to go to ouput 3
Thanks for any help, Chris
 

Attachments

  • Screen Shot 2021-02-26 at 2.15.21 PM.png
    Screen Shot 2021-02-26 at 2.15.21 PM.png
    577.7 KB · Views: 6
  • IMG_0551.jpeg
    IMG_0551.jpeg
    76.4 KB · Views: 6
First, you don’t have any cable plugged into Output 3 on the rear.

Also, you have Out 3 Block set to -27db. Turn it up back to 0. Also make sure the Out 3 physical knob is turned up on the front panel.

There is also a connector missing in your Out 3 row, so sound would not get to the Out 3 block.
 
First, you don’t have any cable plugged into Output 3 on the rear.

Also, you have Out 3 Block set to -27db. Turn it up back to 0. Also make sure the Out 3 physical knob is turned up on the front panel.

There is also a connector missing in your Out 3 row, so sound would not get to the Out 3 block.
Thanks, I feel like a big dummy. All good now.
 
Back
Top Bottom