are you using a TRS cable?
is auto-engage being used?
i've used all pedals you've mentioned and never had anything "jumpy" happen.Yes using TRS.
Auto engage is off.
That could definitely be it as well.Your CPU is above 80%... Try getting out below 80%.
Try a different taper ?
i've used all pedals you've mentioned and never had anything "jumpy" happen.
try a different TRS cable. if you can show us video of what's going on, we can help you better. not much detail right now.
change the cable. it might fix it. try another pedal port. we need to source the issue.
describe where it "jumps higher" and what that means specifically. that usually means the wrong cable is being used.
View attachment 54671
this is TRS, just making sure. many people said they use TRS then are like "wait what is that."
+1 on trying a different expression pedal input if the cable doesn’t fix it. I just recently had some real issues with expression pedals, tried several pedals and cables, and cured the problem when I moved from Ext 1 to Ext 2. My guess is that I (or someone else) managed to step on the cable end on a tight stage and did something that affected the connection. Going to another completely cured the intermittent crazy behavior.
Your CPU is above 80%... Try getting out below 80%.
That could definitely be it as well.
Those shunts going to OUT2 are for what, exactly?
Where is that?Check the update rate on the modifier, I think they default to "Slow" to save on CPU. I've got the ones for Volume and Wah set to "Fast" in my patches and for me it makes a big difference.
Top right of the modifier screen in Axe-Edit.Where is that?
Here's a quick video demonstrating the issue.
I've also tried changing the "Update Rate" & "Taper" and no difference.
The issue exists on all three pedals I've tried and with different TRS cables.
Updated to 5.07 as well.
Your CPU is above 80%... Try getting out below 80%.
Also looks like you are getting pretty close to that magic percentage that can have negative issues. Just a thought.
Just curious, does the little yellow dot on the slope line in the edit modifier screen, jump like the volume does while moving the pedal or does it move smoothly?
What's the source of the VolPan "Bypass" modifier (visibly assigned in first screenshot)?
It sounds like the pedal is thru-bypassing the block above 50%, or maybe engaging another block that boosts level. I'd guess it's bypassing the VolPan since it's bypassed in AE grid w/ volume at 100%, but I don't know if you intentionally have a separate controller to A/B switch pedal-controlled blocks.