But I would be very thankful for only not having to readjust the GEQ of my Mark II/IV presets everytime I reset. It's a major pain in the butt.
I had the same problem, then I noticed the speaker size was set to minimum value on ALOT of the presets.Don't want to alarm anyone, but half of the factory cabs sounds horribly wrong and bad.
It happened in 6.02 and 6.03, same thing.
Maybe that needed a reset in someway, but I litterally didn't do anything that wasn't turning it off and then on again.I had the same problem, then I noticed the speaker size was set to minimum value on ALOT of the presets.
Not saying I don't like the brit 800 mod in q7b. In fact it's awesome for some things. But I prefer that model in q6. It was awesome for getting more aggressive than the plexi without getting into recto territory.
I'd love to see them both in the FW. Just curious if anyone else cares.
But shouldn't this new Brit 800 mod actually be a redone AFS100 1 model (which is based on a JCM 800 w/#34 mod). I'm confused between these 2 modelsNot sure if it's possible but can't you just select version q6 in the advanced menu rather than latest? I'm not sure if it's still possible. I really dig the new one so doesn't really effect me but it might be worth a shot. You can also crank the treble and presence much more in this firmware without any harshness.
Other cases have been documented whereby a Firmware update must be done a 2nd time, to clear up glitches. Placebo or otherwise, it can't hurt to spend a minute of your time to re-install the firmware for a 2nd time, and then proceed with your listening - to see if that cleared it up for you.
The AFS amp model is actually based on the Marshall Slash signature amp which has a #34 mode.But shouldn't this new Brit 800 mod actually be a redone AFS100 1 model (which is based on a JCM 800 w/#34 mod). I'm confused between these 2 models
But shouldn't this new Brit 800 mod actually be a redone AFS100 1 model (which is based on a JCM 800 w/#34 mod). I'm confused between these 2 models
The AFS amp model is actually based on the Marshall Slash signature amp which has a #34 mode.
Not sure if this is Cliff's own interpretation of a JCM800 with #34 mod, as opposed to Marshall's interpretation of the #34 mod contained in the Slash signature amp.
What I'm taking from this is that;
The AFS100 model is based on a signture Slash Marshall amp (which is essentially a JCM800 with #34 mod)
The Brit 800 mod model is a JCM800 Marshall with the #34 mod
Seems redundant to me, what was the Brit 800 mod before Q7b? #34 mod?
Edit: I like Slash but not bonkers for his tone so I feel the old Brit 800 mod was a fat sounding rocker
All I know is I'm loving the new Dirty Shirley. I loved the first one, but I'm definitely digging the slightly more aggressive v2. Cliff, you never cease to amaze me and go Pats. How bout that drive for 5 from our team?
The question is, what
Is the HOOK tested or on the to do list? What´s the improvement for the HOOK?
Schematic and an example to match toSo all that's needed is a schematic? I found all of these Engl ones...http://www.schematicsunlimited.com/e/engl/
So all that's needed is a schematic? I found all of these Engl ones...http://www.schematicsunlimited.com/e/engl/
We already have the best Engl amp in the Axe....the Savage 120.So all that's needed is a schematic? I found all of these Engl ones...http://www.schematicsunlimited.com/e/engl/
Yes, and a lot of schematics floating around on the net are inaccurate, so I think the idea it needs a verified or presumed correct schematic. Edit: Lol Cliff beat me to the punch. Typing on the iPad soft keyboard.Schematic and an example to match to