Waltdude
Member
Thanks Rex: I did find it. I also found this little calculator.AJ Audio Subwoofer Box Enclosure Design Software - Sub Speaker Cabinet Building Program Downloads Maybe it helps if your thinking of building your own cabs.
You made two changes but only one comparison. There's no way to draw reliable conclusions from that. Try changing only one thing at a time and see which you like better.
They're not interchangeable. The IR contains frequency-response data only. The resonance controls on the amp block are impedance curves. They affect how the amp model distorts differently at different frequencies. IRs can't do that.I made two changes because these are interchangeable (tube p.a. impulses also contain the lf/hf resonance data).
Most definitely. You can clearly hear it in the Ownhammer IRs. The IRs made using a tube amp have a noticeably more scooped tone.
Any changes at all will affect the sound through the cab. That's part of having your sound up there on stage with you.if i use output1 for FOH and output 2 for a real cab any changes at LF also affects the real cab ,so how do you handle that ?
That may be a room resonance. Those are tough to resolve completely. Either reduce LF resonance, or hut down the offending frequency and cut it elsewhere I your chain.
An instrument that allows transmission that not only supplies inverse reactive current for use in unilateral phase detractors, but is also capable of automatically synchronizing cardinal grammeters.
Basically, the only new principle involved is that instead of power being generated by the relative motions of conductors and fluxes, it is produced by the modial interaction of magnetoreluctance and capacitive directance.
The original machine had a baseplate of prefabulated Amulite, surmounted by a malleable logarithmic casing in such a way that the two spurving bearings were in a direct line with the pentametric fan. The latter consisted simply of six hydrocoptic marzel vanes so-fitted to the ambifacient lunar wane shaft that side fumbling was effectively prevented.
The main winding was of the normal lotus-o-delta type placed in panendermic semi-boloid slots in the stator, every seventh conductor being connected by a nonreversible trem'e pipe to the differential girdlespring on the up-end of the grammeters.
Fractal Audio has now reached a high level of develement, and is being successfully used in the operation of nofer trunnions. Moreover, whenever a barescent skor motion is required, it may be employed in conjunction with a drawn reciprocating dingle arm to reduce sinusodial depleneration.
It's available soon, wherever Fractal Audio products are sold!
Try this! Add a Synth block, settings: Type = Sine, Track = Off. Now sift the Frequency between 70 - 100 Hz and really FEEL the resonance with your palm/hardel on the cabinet's front panel (wood) ... You have to set the volume quite loud but you can do this even at home.