Search results for query: *

  1. C

    MFC 101 update ?

    I bought my Axe-Fx in June, 2008. Supposedly, I was put on the list for one then. Axe-Fx is a great product and has the finest support for any product I have ever seen or been associated with. But, I have to give them a thumbs down the way they have handled this. :? Jim
  2. C

    Axe-Fx Floor Model or a GREAT dedicated foot controller?

    YES ... it's been "in progress" since around June, 2008. I think that's when my name went on the list.
  3. C

    FRFR that pushes air like a 4x12?

    Hmmm ... what about a 4 x 12 cabinet with 4 JBL E120s .... of course, you will have to buy a fork lift to move it :lol:
  4. C

    Want to go wireless, any suggestions?

    Has any one tried the Galaxy AS IEM s? AS 900, AS 1000, and so on. The Galaxy AS 900 starts at 199.00 at Zzounds. I assume you would need to upgrade the Ear monitors. I would love to read a true review. Jim :)
  5. C

    Verve 12's, etc for BASS guitar, or full range bass cab...

    They do make a Verve 15ma http://www.fbtusa.net/FBTVerve15matcf.html I have an 8ma and a 12ma and like them both I also own QSC 122 and EV SXa 360 and EV SXa 250s I like the Verve the best Jim :)
  6. C

    FBT Verve 12ma

    Well, I have both the 8ma and the 12ma setup and have been playing them for a couple of hours. I like what I hear and I am very satisfied with both these speakers. That being said, here's the disclaimer. Tone is subjective. What is great tone? What I think is great, you probably won't. My...
  7. C

    FBT Verve 12ma

    I got the 12ma today, new in the box. I'll try to get a review side by side with 8ma as soon as I can. Jim :D
  8. C

    New Paisley preset

    I see in this clip, he is using an old Fender, but I know most of his guitars are made by Crook Custom Cuitars. http://www.crookcustomguitars.com/ JIm :)
  9. C

    FBT Verve 12ma

    This is the first time I have dealt with them, I did get a Fed EX tracking number from them today. I'll let you know when I get it and try to do a review of both side by side. Thanks Jim :)
  10. C

    FBT Verve 12ma

    I have a Verve 8ma and I love it. So I just purchased the 12ma Stickenstrings have them in stock and Tony just sold me one for $839.00 plus $20 shipping from Tucson to Bethlehem, PA Anyone looking for one, he has them in stock. http://www.sticksnstrings.com Jim
  11. C

    Clean Sounds

    very nice :D
  12. C

    Fingerpicking on a tele, clean with a little dirt.

    Great picking ... share the settings?? Jim :D
  13. C

    Going straight to FOH without your own monitors

    You will not regret buying the Axe-FX. I use a 4 space Gator rolling rack, I have Monster Power 2500 in it. It has shut down a couple of times because of too much power. I have the Axe and I use an X2 rack wireless. The rack has a pocket on front that I use to store a Liquid Foot Jr and a...
  14. C

    Preferences for Updates - Question for Cliff

    Is there a waiting list???? :lol:
  15. C

    Axe-Fx Firmware Version 8.02 Released

    Cliff, Thanks for for the update. I loved it. You keep amazing me. I really liked what you did to the Drive Blocks and I had no trouble understanding your release notes. Everything worked perfectly on the uploads. Thanks Jim :D
  16. C

    First Practice with QSC HPR122i - really need advice?

    Something is definitely not right. I was using a Ferve 8ma this afternoon and my wife was complaining that I was rattling the windows in the upstair bathroom and this is only 200 watts. I own 4 QSCs that I use as FOH and they can get LOUD! Jim :!:
  17. C

    Must be the Water by InsideOut

    Sounds great ... wish I could play that well :D We have some really talented people here :!: Jim
  18. C

    Will someone save me from this &*)(&% AXE-FX!!

    Hi Tonepoet, Hey ... I'm on your side ,,, these things stink. Sell!... sell!... sell! Why do want all this frustration? SELL IT! .... how much you want for it? JIm
  19. C

    Recommend good quality, under 40lb powered monitor?

    +1 I was worried about the bass too, but I am very happy with it. I play in a 6 piece band and I use it on stage. You won't believe the sound coming out of such a small speaker. It's very solid built too. Jim :D
  20. C

    FBT Verve or Jolly?

    I have a 8ma and I use a 3 space rack on a "Z" stand. The stand will just to my right when I play. I plan on sitting the 8ma on top of the rack and use it right out of the back of the axe. The 8ma will be about 3 feet from my head. I think it will be loud enough in just about any situation. If...
  21. C

    Axe-Fx and X2 Wireless problems on the same power strip

    I have three X2s. I have never had a problem with any of them. I have 2 of the first ones that came out(before Line 6 bought them) and I have 1 of the rack mounts. I use a Monster Pro 2500. I power the Axe-FX, Peterson Tuner, X2 Wireless, Shure PSM 700, and Shure 4 Channel Personal Monitor. I...
  22. C

    Fender Twin Reverb or Hot Rod good match with Axe-Fx?

    It would really benefit you to read some of posts here about FRFR speakers. I use an EV SXa 360 and FBT Verve 8ma. I like the Verve the best, but that's just me. The Axe-FX should be able do everything you want Jim
  23. C

    FBT 8ma vs QSC

    After playing the 8ma for a while ... I've got to say it lives up to its reputation. Jim :D
  24. C

    FBT 8ma vs QSC

    I got my FBT 8ma today. Haven't hooked up yet :D Jim
  25. C

    Axe-Fx Standard Firmware 7.17 Released

    Tried out 7.17 and I have to say I like it. It DOES make the sound come alive. IMHO it sounds more natural ... but my sounds are more on the clean side. :D Jim
  26. C

    Firmware Version 7.16 Ready (Standard Added)

    Thanks again Cliff for supporting this product so well. I know there is no obligation for you to continue to update this product. You could make much more money by coming out with The New Improved Model 2 Axe-Fx, that everyone would buy. I think most of us realize that and are very appreciative...
  27. C

    Liquid Foot JR.

    That's great Jeff ... hee hee ..kinda thought you were a little busy. Jim
  28. C

    Six months on with the AFX (and Verve 12ma)

    I bought the Axe-Fx for 4 reasons. I thought I could recreate the sound of my Carr Rambler, I would not have to deal with pedals, easy set-up, and hopefully the purchase would help with my "gas." I have achieved all those goals. I consider myself a novice with the Axe-Fx. I have had it...
  29. C

    FRFR Question

    Thanks for the great post Scott. Very useful info. Jim :D
  30. C

    Firmware Version 7.16 Ready (Standard Added)

    Re: Ultra Firmware Version 7.16 Ready Thanks Cliff for all the work you put in for us. Jim
  31. C

    Telegraph Sound

    Very nice :D Jim
  32. C

    Firmware Version 7.13 Now Available

    Thanks Cliff, your service is absolutely amazing. Jim :D
  33. C

    Tuner seems less stable in 7.12

    I don't see that on my standard ... seems even more stable to me Jim
  34. C

    Speaker cover for FBT Verve 12mA???

    I have bought several items from Studio Slips. I think their quality is outstanding and Susan will make anything you want. http://www.studioslips.com/index.php Jim :D
  35. C

    What's the best expression pedal for the axe?

    I bought a mission, because Scott said it was good :D JIm
  36. C

    So Scott - Whats the deal?

    Scott, I am on the verge of buying the 8ma. How do you think it will work as a monitor in a full band situation?. I only need me to her myself. All the other people have their own monitors and they can adjust me to their tastes. I am not trying trying to saturate the stage with my guitar, it's...
  37. C

    12ma vs. 8ma - envelope please - and the winner is....

    I getting ready to pull the trigger on the 8ma. SpringTree will sell for $650 plus shipping. http://springtree.net/catalog/verve-series-2way-powered-monitor-verve-p-5357.html Jim :)
  38. C

    All in one pedal with CC controllers?

    You might want to check out the Liquid Foot Jr. http://www.youtube.com/watch?v=Nqvz8Txg2dQ Jim :)
  39. C

    ALTO MS10MA

    Has anyone tried any of the Alto products? http://www.directproaudio.com/product.cfm?directid=59948 Jim
  40. C

    axe-fx with headphone....

    I bought a Mackie 402VLZ3 for $99.00 I plug the Axe into Channel 1 and my laptop into the Tape Inputs. I use the headphone out put on the mixer and everything sounds great. :D Jim
  41. C

    What do you guys do to overcome this "problem"

    Yes.... I have a similar problem. I play in a country band, which is mostly clean tones or ... almost clean. The Axe-Fx does these sounds so well it's hard to choose the amp. I like the Tweed(Deluxe), the Blackface, Dr.Z, Mark IV, Dumble, the Jr. Blues and so on. The Jr. Blues is great with a...
  42. C

    Axe PC

    Cliff, If someone owned both the Axe-PC and the Axe-FX ...could it be possible to do all your presets on the the Axe-PC at home and then upload your settings to the Axe-FX? This would allow me t keep the the Axe-FX at the studio and I could work on my patches at home and just take my laptop...
  43. C

    What to do?

    Welcome :D I use a Mackie 402VLZ3 and I am very happy with the results. JIm
  44. C

    Announcement: Atomic Reactor FR - UPDATED 7/27/09

    Re: Announcement: Atomic Reactor FR Hmmmm ... I wonder if the announcement will e made at the New York Amp Show, May 9th. I see that both Fractal and Atomic are registered to be there. Be a great place to introduce the midi pedal too. :D :D :D Jim
  45. C

    The $2000 Question (an experiment of sorts)

    I would buy a Carr Mercury 1x12 ...... oh never mind ... $2000 is not enough :( Jim
  46. C

    Personal Mini-FRFR Monitor - situation, thoughts, questions

    Hi Scott, I use a Shure P4M. It's pretty neat. I plug hook it up to my PSM 700, I plug the Axe-Fx into the front of it and a line comes from the back to the monitor mix. It allows me to turn "me" up and down without effecting the rest of the mix. Oh ...the size ... it's a half rack...
  47. C

    QSC HPR users.Are you happy or are you waiting on Fratomic?

    I have a pair of QSCs, but I like my SxA360's better and they only weigh about 36 lbs. :D
  48. C

    Gordius Little Giant tuner question

    Hi guys, I have the Gordius LG and I love it. Xavier says as soon as Cliff releases the code, the LG will be able to display the tuner. Until then, the LG can turn the tuner on and off. I love the LG. You can put it in a 3 space drawer, but I use a 15" computer bag. It works perfectly. The LG...
  49. C

    Help/advice needed re: purchasing MIDI Foot Controller !!

    My suggestion is to download the Gordius LG manual and read it. It is one of the most powerful and configurable controllers out there. AND Xavier is like Cliff, always trying to improve and he does listen to his customers. I don't think I've heard of anyone buying one that was unhappy with it...
  50. C

    Great night!

    I have not given a review yet of the Axe ... live. The first couple of times I used it live was not the best. I am a tweaker. Even with my amp and pedal board I am constantly turning knobs. The first couple of times, I tried the same with the Axe-Fx, without good results. Last week I upgraded...
  51. C

    FRACTAL AUDIO SYSTEMS T SHIRTS!

    Is there a waiting list??????
  52. C

    How do you support your Axe onstage when using a guitar cab?

    I have 2 stands right now. I have the WS540 and it's very versatile. I also have a keyboard "Z" stand. Both do a good job, although I like the WS540 stand the best. . http://www.sweetwater.com/store/detail/ZStd/ My rack is 6 space with a 3 space metal drawer that holds my Gordius Little...
  53. C

    Amp sim requests

    Now that's funny ... I don't care who you are... :lol: Cliff .... thanks! :D
  54. C

    Foot Controller buying advise

    If size, display, and communication is important, you really should look at The Gordius Little Giant :D Jim
  55. C

    No news of the MFC101 - thinking about the Gordius Big LG

    I have the Gordius LG. I love it .... more than enough for me. Very happy with the purchase. I like the Little Giant because it fits in a 3 space drawer, along with a EBjr Volume pedal. I can also use a small computer bag(15 inch) and put both LG and the volume pedal in it. They usually have...
  56. C

    MFC101 pics!!!

    Just another option to consider is the Gordius LG. It can give you up to 24 assignable buttons. Either AI or CC, plus up and down buttons. I Have a rack that is only 14" deep and I can put The LG and an Ernie all Jr Volume pedal in a 3 space drawer with room left over :D Just another option Jim
  57. C

    Announcement: Atomic Reactor FR - UPDATED 7/27/09

    Re: Announcement: Atomic Reactor FR JIm :)
  58. C

    Announcement: Atomic Reactor FR - UPDATED 7/27/09

    Re: Announcement: Atomic Reactor FR Hi Tom, Merry Christmas. I am "on the list" :) IMHO ... Even with a "flat" response, we will automatically dial in the sound we are used to getting. It is amazing how we process our sound. I decided to do a new preset last week, just for fun, so I dialed a...
  59. C

    Introduction thread

    Hi everyone I am 57 years old and live in Bethlehem, PA. I was born in NC and grew up in Eastern Prince William County in VA. Zepp88 knows exactly where that is :D I have played in bands since I was 14 years old, playing all the military bases around D.C. I moved to the Lehigh Valley in the...
  60. C

    The first two hours with my ultra...

    Hi Theaero Let me reassure you. All will be fine. Try downloading something from the Axechange. I have to turn my "thump" down. :D Jim
  61. C

    I finally did it! After 17 months, my review of the Axe-FX

    Nice review Solo. I enjoyed reading. Jim :D
  62. C

    Not sure what to say.

    :lol: :lol: :lol: Ain't it great??
  63. C

    Anyone using a Gordius Little Giant Module w/ their FCB1010?

    Hi George, I bought the Gordius LG in June. The one with the switches. Great unit. I use it by itself with a EB Volume pedal. That unit alone does more than I need. Mike Snider helped me with the programming. I use a small computer bag(one that came inside my rolling bag) to carry both the LG...
  64. C

    What do I look for in a power conditioner?

    I know ... I must be an idiot for paying$200 for a Monster Pro 2500. In defense, I can say they work. I use one with my mixing rack and board. WE play a lot of outside jobs with some "strange" power. I have a lot of money invested in amps and PA systems. The thing I like about the Monster Pro is...
  65. C

    Suggestions for an Expression Pedal??

    Don't know of an expression pedal that has a "toe-down" bypass. The Gordius Line of midi pedals does have that feature. Be prepared to drop about $900, but I have to say ... it's one heck of a midi controller!! :D
  66. C

    Welcome to the New Axe-Fx Forum

    Thanks for getting the new forum up so fast :D
Back
Top Bottom