Search results for query: *

  1. sgplayer76

    Wish Compensation Switch for MV

    I really like the NFB compensation switch recently added to the Negative FB control. The ability to hear how moving the negative fb control (actually) sounds without a large volume increase/decrease is awesome. My Wish: It would be really cool to see something similar to the NFB compensation...
  2. sgplayer76

    Fixed Amp block - Toggling SIC curves

    Mine does the same thing. I need to update to 24.04 - I’ll report back after I’ve had a chance to update and play (later this evening). Update: Still there after updating to 24.04.
  3. sgplayer76

    Axe-Fx III Firmware 24.04 Release

    FAS, you guys are amazing!
  4. sgplayer76

    Help with EP1 connection

    Thanks guys 👍
  5. sgplayer76

    Help with EP1 connection

    Hey guys, I need help with my expression pedal. I have a Mission foot controller that I used with my AxeFx 2 and now the AxeFx 3. It is connected with a TRS cable into the “Expression 1” input on the back of my AxeFx3 (exactly the same as it was with the Ax2). The issue I’m having is that I...
  6. sgplayer76

    DynaCabs on Sale

    Thank you 👍
  7. sgplayer76

    DynaCabs on Sale

    Are the "New" and/or "On Sale" Dynacabs listed on this forum brand-new offerings, or the same cabs we currently have on the AxeFx3?
  8. sgplayer76

    Axe-Fx III Firmware 23.04 Release

    The presence switch was turned on after I updated to 23.04. See if that’s what is causing your issue. GL!
  9. sgplayer76

    Solid State amps, are they going to be here someday?

    I wouldn’t mind Fractal adding an Ampeg VH140C to their lineup. It was one of the best sounding amps I’ve ever owned (tube, SS, or digital).
  10. sgplayer76

    Factory IR Mic Positions

    Thanks for the responses. It’s a question I’ve always had, but never really felt the need to ask - until now. I figured knowing would help me find the best starting point, then tweak until it sounds perfect (to me). I’ve been going with my ears using dyna cabs and have found a few cab...
  11. sgplayer76

    Factory IR Mic Positions

    Hey Guys, I have a question about the factory IR’s mic position(s). Most of the factory cabs have several positions labeled A, B, C, D, …etc. I would like to know (roughly) where the microphone is positioned for each letter when the cabs were captured. I am hoping that knowing this will help...
  12. sgplayer76

    What Amp Models would you like to see added?

    Revv Generator 120 MkIII
  13. sgplayer76

    Wish Looper Trim View

    I would like an easier way of viewing the looper’s start & end trim(s). Maybe a zoom feature or even a brighter color that easily contrasts the recorded loop (the current grey is difficult to see).
  14. sgplayer76

    21.02 Beta 3 Output?

    Thanks guys. I’ll try running the update again.
  15. sgplayer76

    21.02 Beta 3 Output?

    Hey guys, I just updated my Axe3 with 21.02 beta 3. I have 8” studio monitors connected to output 1 and noticed a pretty significant drop in volume - I had output 1 volume turned above noon before the speakers were louder than conversion volume. I checked the I/O settings in the Axe and...
  16. sgplayer76

    Possible acoustic sim with burstbucker paf pickups?

    I created a patch with no amp or cabinet - just the input block, reverb, delay, enhancer, and output block - that does a pretty decent acoustic tone with my Les Paul (burstbucker pro pups with the volume rolled off). It’s definitely not perfect, but it might get you closer to the sound you’re...
  17. sgplayer76

    Cables recommendation

    I use a Mogami Platnum patch chord and Mogami Gold cables to connect my studio monitors. My USB and TRS cable connecting my Mission pedal are generic but do not effect sound. Mogami cables are somewhat pricey, but they come with a lifetime warranty - I recently bent the tip of my patch chord...
  18. sgplayer76

    Redwirez Is Shutting Down

    Sad news that they’re shutting down. I’ve bought IRs from them in the past so I tried logging on my account, but the website seems to be down. Hopefully it’s not a permanent thing, but if it is, I appreciate and still enjoy the RW IRs I already have.
  19. sgplayer76

    Gift of Tone #11: FREMEN

    Makes sense. Thanks again 👍
  20. sgplayer76

    Gift of Tone #11: FREMEN

    Great presets! I had to change the wah's control "Off Value" from 95% to 5% in scene 01 to allow the wah to bypass. I also needed to change the wah from "Channel A" to "All" in scene 02. Thank you for creating/sharing these!
  21. sgplayer76

    What Prompted You To Buy A Fractal?

    I made the switch to modeling with a Line 6 Vetta. When the original Axe Fx was launched, the positive reviews were enough for me to try it. I was blown away when I received it. I eventually upgraded to the Axe Fx II, and now the III. There’s nothing available today that comes close to...
  22. sgplayer76

    GIFT OF TONE #1: LEON TODD

    Thank you! That was it. 👍
  23. sgplayer76

    GIFT OF TONE #1: LEON TODD

    I’m having trouble importing the presets on my Axefx III. I followed the instructions in the video. Leon’s cab IRs loaded fine, but the actual presets do not. Looking forward to trying these out! Any help would be great. 👍
  24. sgplayer76

    Favourite microphone choice

    I’m a fan of the Beyerdynamic M160.
  25. sgplayer76

    Axe-Fx Firmware Version 21.00 Public Beta (Beta 1)

    I primarily use a Mac with Reaper or GarageBand for recording… I had issues with DI and re-amping with this setup. It turns out, you cannot change/assign outs on a Mac unless you are running Logic Pro (at least on my Mac). I also have a PC/Reaper and have no issues whatsoever.
  26. sgplayer76

    Axe-Fx Firmware Version 21.00 Public Beta (Beta 1)

    Not sure if this is a bug or a settings issue… Since updating to beta 21.00, I am hearing a faint but noticeable crackling sound in the delayed notes when using stereo digital delay. Everything else sounds great with the update. 👍
  27. sgplayer76

    Backing tracks

    Glad I read this thread. I was not familiar with Moises so I downloaded it. What a cool app!
  28. sgplayer76

    Mesa Thiele?

    Sorry for the dumb question, but I’m wondering if the Mesa Thiele 1x12 cab IR is in the AxeFx III’s factory cabinets? If so, I can’t seem to find it. Thanks!
  29. sgplayer76

    Wish Ampeg VH140C

    I gigged with a vh140c back in the 90’s. I’d love to see it added to the AxeFx!
  30. sgplayer76

    so... whole bunch of bass presets... some tone matches... some unconventional bass amps...

    I’m really enjoying your presets! Thank you for sharing. 👍
  31. sgplayer76

    How Many Amps Have You Owned, & Can You Remember Them All?

    Marshall JCM800 Line 6 Flextone Line 6 Vetta Mesa Dual Recto Mesa Roadster Mesa 20/20 Engl Powerball Engl Fireball Orange Tiny Terror Peavey 5150 Peavey 6505 Axe-Fx Standard Axe-Fx II Axe-Fx III
  32. sgplayer76

    Axe Fx II vs Axe Fx III

    I upgraded from the Axe-Fx II to the III about 6 weeks ago. In terms of pure sound, the difference is huge. Everything sounds noticeably better on the III. The III offers a ton of new amps, effects, and ways to sculpt your tone. The number of available IRs is overwhelming (a good thing)...
  33. sgplayer76

    Who's your go to Fractal guru?

    The manual and this forum for me.
  34. sgplayer76

    Connecting a subwoofer ?

    You could always use the headphone out to your sub.
  35. sgplayer76

    Friedman Master Volume

    Thank you!
  36. sgplayer76

    Friedman Master Volume

    Which cabinet models (generally) sound best with the Friedman models? I tend to gravitate towards the same few cab models for every patch I create… I’d like to try something different but have no idea where to start. Thanks!
  37. sgplayer76

    Is there a consensus headphone choice?

    I’m really happy with the tones I’ve created using Audio-Technica M50X headphones.
  38. sgplayer76

    Virtual Capo Tracking Question

    Hello! I use the Virtual Capo in many of my presets and even when recording. It’s pretty straightforward and works well, but I would like to know more about the tracking parameter. I am currently using the default setting (Tracking 5.00) and shift -2. Should I increase the tracking when...
  39. sgplayer76

    My First PRS

    Congrats on a great guitar! I bought my first PRS in 2002 - a Custom 24 10 top. I have several other guitars, but it still by far my favorite.
  40. sgplayer76

    Moving from Mac/GarageBand to PC…

    Thank you for the advice. I downloaded Reaper and it seems pretty solid. I’m already missing my old Mac and GarageBand though… It doesn’t get much easier than that. Lol
  41. sgplayer76

    Moving from Mac/GarageBand to PC…

    Hey guys, I know this has been discussed before but I’d like fresh advice as most the threads I searched were old(ish). I have an AxeFx II and have been recording via USB to an OLD Mac desktop/GarageBand. I just purchased a new PC and would like to record in a similar fashion (axe fx usb to...
  42. sgplayer76

    underwhelming sound through headphones advice

    I turn the cabinet’s room level to 39 - 41% and as others have mentioned, add an enhancer block at the very end of the signal chain. It sounds great through my ATH M50x headphones. Btw, I personally prefer the enhancer’s “classic” mode and set the width between 50 - 100% depending on the patch.
  43. sgplayer76

    Axe FXIII with Mesa Boogie 50/50 and 2x12 stereo Mesa Boogie Cab

    I run my axe fx II through a Mesa 20/20 tube amp and recto 2x12. I do not use a cab (or bypass the cab sim in the axe grid, but I always leave the power amp modeling on. On some presets, I sometimes lower the amp modeling level, but it definitely sounds much better with it on.
  44. sgplayer76

    Metallica James Hetfield live heavy Tone Match

    Sounds great! Please share your patch. 👍
  45. sgplayer76

    IRs Dr Bonkers Has a Free Gift to Get Your Mind Off of Shelter in Place

    Thank you so much! Stay safe.
  46. sgplayer76

    Pitch block for Drop C tuning

    I agree completely. I use pitch down tuning when playing/practicing songs with my headphones on. I always tune down when recording or playing live.
  47. sgplayer76

    Pitch block for Drop C tuning

    This is one of my favorite features on the Axe. It works really well when the guitar volume is full but it struggles (at times) when I roll back the volume. Either way, its a lot easier "down tuning" via Pitch than down tuning or swapping guitars.
  48. sgplayer76

    Tone match and IR capture of head and cab

    I stopped using a cab block altogether tone matching. The tone match block replaces the cab block and the results are exactly the same to my ears. For those of you not using tone match, it is extremely easy and one of the very best features on the Axe.
  49. sgplayer76

    The Power Of Tone Matching!

    Quite possibly my favorite feature on the AxeFx.
  50. sgplayer76

    Stereo out via USB HELP!

    I have the same setup... Axe > USB > iMac > garage band. As Chris posted above, you need to select a stereo track in garage band. The default is mono so this should do the trick.
  51. sgplayer76

    Free Mesa 2x12 mix IR

    Thank you, Justin!
  52. sgplayer76

    Isolated guitar track

    Anyone here happen to have the missing A, B, & C downloads?
  53. sgplayer76

    Amp Output Levels

    It depends on the model, but your settings are similar to mine. Tonematched patches however, are always quiet (not sure why) so I set my output around -10 - -8.
  54. sgplayer76

    Is it possible to export a factory cab from AX8 to Axe-Fx II?

    Would CabLab work? I just downloaded the lite version from Fractal's site... It works great converting IR's that normally would not work with my Axe II. If you can export an IR from your AX8, you should be able to convert and load it to your Axe.
  55. sgplayer76

    Nirvana - 'Smells Like Teen Spirit' Tone Match

    What an awesome Tonematch! Thank you for sharing
  56. sgplayer76

    Going from FRFR to poweramp/cab

    I play both ways (FRFR and power amp/cab). I generally lower, but not completely turn off amp modeling. I usually set SAG between 5-10 and always disable cab modeling. FYI, my amp is a Mesa 20/20 and my cab is a Mesa oversized Recto 2x12. Hope this helps!
  57. sgplayer76

    Good headphone suggestions

    I tried the Beyerdynamic DT-880s in a higher ohm... They sounded amazing, just didn't get loud enough for my needs. If they make it in a 32 ohm, thats a great option.
  58. sgplayer76

    Good headphone suggestions

    Get the lowest ohm rating possible. The lower the impedance, the easier it is for the Axe or your device to push them.
  59. sgplayer76

    Good headphone suggestions

    I have not tried the HD600s. Does the Axe have any issues powering them? Also how do they sound paired with a phone? $199 is a great price...
  60. sgplayer76

    Good headphone suggestions

    My suggestion may not be "traditional" as far as headphones go but I highly recommend checking out the V-Moda M100. I auditioned at least a dozen headphones priced between $150 - $400 before settling on the V-Modas. They sound incredible and can also get extremely loud using the Axe or even a...
  61. sgplayer76

    FracTool - for power users only

    Thank you
  62. sgplayer76

    Energyball /Powerball 2

    Yes, it does a great job recreating the ENGL Powerball II sound. I used to own one so I was able to compare directly. Moreover, the Axe has the ENGL Savage, which is BY FAR better sounding and easier to dial in.
  63. sgplayer76

    FracTool - for power users only

    What are the system requirements for Fractool? I use an old iMac running 10.6.8 and it crashes as soon as I try to open it. Sorry if this has been asked before, but I did not want to weed through 100+ pages to find the answer. Thanks!
  64. sgplayer76

    Axe-Fx II Firmware 19.00 Released

    Like everyone else is saying, this is just awesome. I really appreciate everything you (Cliff) and your team do. I am definitely a customer for life!
  65. sgplayer76

    USB/Computer sound is quiet or silent - Here's what to do

    Thank you! I just sat down with my headphones and barely had audio -- this was exactly what I was looking for! :)
  66. sgplayer76

    Web Site Redesign

    Well done -- I think the new site looks great!
  67. sgplayer76

    Officially Welcome OPETH

    Exciting news! Opeth is easily my favorite band.
  68. sgplayer76

    Axe-Edit 3.1.3 released!

    Thank you for the update FAS! :)
  69. sgplayer76

    Axe-Fx II fw 17 Released

    Thank you FAS! You guys are amazing!!
  70. sgplayer76

    New Guitar Day.....

    Congratulations and happy (belated) Birthday, John -- such an amazing LP!!
  71. sgplayer76

    It's a parenting win when...

    You should see my two sons (age 3 and 7) "get their jam on" while I am playing along with Opeth. My guitar room instantly becomes a mini-mosh pit! :)
  72. sgplayer76

    PRS Guitars

    I am on my second PRS. My first was a CE-22 that I sold back in 2008 to buy the Les Paul that you see in my Avatar. The CE22 was a great guitar, but it was never what I really wanted. I found and purchased "that" PRS a few months later. A (then) flawless emerald green 2002 Custom-24 "ten" top...
  73. sgplayer76

    Offline for a Couple Days

    Enjoy your weekend Cliff! Hopefully you can keep your mind off "epiphanies" and cathode followers... maybe the misses can help you out! So have fun "resting" man! ;) Thankfully my wife does not read this forum, so I can safely say that after 16 years of marriage (and even without the kids)...
  74. sgplayer76

    My mission sp-1 start to rust

    I have a Mission EP-1 (with the spring), mine is squeaking too... Super annoying. Mine has only been used indoors (same room, same spot), so I am guessing it is a dust (not rust) problem. I've been trying to isolate the problem by ear, but it is IMPOSSIBLE to tell exactly where that damn...
  75. sgplayer76

    First Telecaster......

    That is EXACTLY what would come to mind if I imagined a perfect Tele - model, color, condition, everything! Congrats!! :)
  76. sgplayer76

    Headphones usage

    I tried the DT 770 Pros, which are 80 ohm. I know they are not the same thing, but I thought the Axe had a little trouble driving those.
  77. sgplayer76

    Coming Soon

    Looks awesome - congrats Cliff!
  78. sgplayer76

    Who uses a basic signal chain?

    Almost all of my patches look like this: Wah -> Amp1 -> Cab1 -> Delay (bypassed) -> Reverb (bypassed). I will add other effects depending on the sound I am going for, but wah, delay, and reverb are my "go to" effects. I often assign a clean amp model in "Y" (assuming X is not a clean amp), so...
  79. sgplayer76

    Axe-Edit 3.0.9 Released!

    Awesome! Thank you! :)
  80. sgplayer76

    The Dumbles, holy crap, the DUMBLES!

    Interesting! I will have to give the Dumbles another try. They never really spoke to me before... Thanks! :)
  81. sgplayer76

    No double-click bypass preset reset?

    Double-clicking bypass still resets individual block parameters - not sure if that is the proper terminology. (i.e., resets amp, cab, etc.).
  82. sgplayer76

    axe fx into amp head to cab?

    Well said. I think most would agree this is the best method.
  83. sgplayer76

    New Amp that Roars

    This is the best high-gain update ever! I've spent most of the day (and night) playing the Savage, Triaxis LD2 Red, and the new Recto - they are all incredible. I have not really even touched the Brootalz yet - had to leave some fun for tomorrow. :)
  84. sgplayer76

    Axe-Fx II fw14 Released!

    By far the best amp models in a FW release EVER! Just an amazing update - the IR's are also incredible! Thank you FAS!!! :)
  85. sgplayer76

    axe fx into amp head to cab?

    I predominately use studio monitors, but occasionally run my Axe directly into the loop (fx return) of my 6505 head and Mesa 2x12 cab. I turn the cab sims off, but actually prefer to leave the power amp sims on. Honestly, I prefer the overall tone of the Axe/6505/Mesa Cab vs. my studio...
  86. sgplayer76

    So, V14...

    The Engl Savage is the one amp I've always hoped FAS would add to the Axe... I am SUPER excited about 14.
  87. sgplayer76

    13 on a 10.6.8 Mac

    I'm on 10.6.8. and using A.E. and Fractal Bot. Everything works great! I am using the old "Mac150 USB Driver" - the newer driver caused all kinds of problems for me. The old-school Mac150, golden! :)
  88. sgplayer76

    Do You Hear a Difference

    I voted "no" because the difference is insignificant. I'm not so sure about comments stating one clip being "better" than the other. They sound about 98% the same to me. Whatever Cliff is doing/discovered in this clip, it is REALLY good!
  89. sgplayer76

    Want to be annoyed? (Brad Paisley content.)

    That was great! My 6 year old son is really starting to take an interest in music. He will love this video! :)
  90. sgplayer76

    The bright knob is killer

    So yeah, I have to agree, the bright knob is killer! It's amazing how funny and off topic this thread went! :) Hilarious!
  91. sgplayer76

    Axe-Edit 3.0.6 Released

    Thank you FAS!
  92. sgplayer76

    Axe-Fx II FW v13.07 Released!

    The Engl Savage is the one I've been waiting for!!! Can't wait! Thank you Cliff!!!!! :)
  93. sgplayer76

    Axe-Fx II Firmware Version 13.02 Released

    BTW, I like the different font. Definitely makes it easier to spot the URs!
  94. sgplayer76

    Axe-Fx II Firmware Version 13.02 Released

    Must have missed that in the release notes... Thanks!
  95. sgplayer76

    Axe-Fx II Firmware Version 13.02 Released

    Amazing update! THANK YOU Cliff, Fractal!!! :) One odd thing... My UltraRez cabs (the 10 free ones) are appearing in Axe Edit in a large, italic text/font. No big deal - just wondering if anyone else has seen this?
  96. sgplayer76

    Axe-Edit 3.0.5 released!

    Thank you! Great update!!!
  97. sgplayer76

    DONT pick amps with your eyes!

    Great advice OP! I especially tend to agree with jsletner's comment about IR's. I have found so many unusual, but great sounding combinations using my ears! For example, Factory Cab #1 - 1x6 Oval. If you have not tired it, you might just be surprised how well that cab sounds by itself or...
  98. sgplayer76

    About the Axe-Fx II XL

    This is just another example of why your products are BY FAR the best available.
  99. sgplayer76

    Announcing Axe-Fx II XL

    A firmware update with a blank "Bank D" would be a dream come true for me on the standard Axe II. Not sure it would ever happen, or if it is even possible, but it sure would be nice! BTW, great job with the new Axe II XL, FAS! I especially like the additional preset capabilities and the...
  100. sgplayer76

    Matrix NL12 Impressions

    Great review! I am getting really close to taking the plunge on a GT800 and NL212. Your review, along with other posts in this thread, are definitely helping me make up my mind... :)
Back
Top Bottom